Akicon Humidity Sensor and Light Switch Instruction Manual

1. Pengenalan

This instruction manual provides detailed information for the installation, operation, and maintenance of your Akicon Humidity Sensor and Light Switch. This device is designed to enhance comfort and air quality in areas prone to humidity, such as bathrooms, laundry rooms, and basements, by automatically controlling ventilation fans and lighting.

Ciri-ciri Utama:

• Pengesanan Kelembapan: Automatically activates the fan when humidity exceeds a preset level and deactivates it when levels return to normal.
• Fungsi Pemasa: Allows for timed operation of the fan, ideal for post-shower ventilation.
• Multi-Function Control: Features a fan switch and two light switches, compatible with most bathroom exhaust fans and lights.
• Tetapan Fleksibel: Offers 5 levels for both humidity sensitivity (90%, 80%, 70%, 60%, 50%) and timer duration (5, 15, 30, 45, 60 minutes).
• Pembatalan Manual: Ability to manually turn the fan ON/OFF, bypassing the humidity sensor.
• UL Disenaraikan: Memastikan pematuhan dengan piawaian keselamatan.

Rajah 1.1: Depan view of the Akicon Humidity Sensor and Light Switch.

Rajah 1.2: Terperinci view of the switch highlighting LED indicators, humidity sensor, fan switch, LED light switch, night light switch, and humidity/time setting controls.

Figure 1.3: Explanation of Auto and Manual operating modes for energy saving.

2. Spesifikasi

Figure 2.1: Detailed size specifications of the switch for proper fitting.

3. Maklumat Keselamatan

WARNING: Risk of Electric Shock. Turn off power at the circuit breaker before installation.

• Always disconnect power at the circuit breaker or fuse box before installing, servicing, or cleaning the unit.
• Pemasangan mesti dilakukan oleh juruelektrik bertauliah mengikut semua kod elektrik tempatan dan nasional.
• Ensure a neutral wire is available and properly connected to power the switch.
• Do not install in locations where the ambient temperature exceeds 104°F (40°C).
• Peranti ini bertujuan untuk kegunaan dalaman sahaja.
• Do not use with dimmable fans or fans that are not compatible with solid-state controls.
• Pastikan semua sambungan selamat dan berpenebat dengan betul untuk mengelakkan litar pintas.

4. Panduan Pemasangan

4.1 Pemeriksaan Pra-Pemasangan

• Ensure the power is OFF at the circuit breaker before beginning any work.
• Confirm that your existing electrical box is compatible with the switch dimensions.
• Verify that a neutral wire is present in your electrical box. This switch requires a neutral wire for proper operation.

4.2 Gambarajah Pendawaian

Follow the wiring diagram carefully. If you are unsure about any steps, consult a qualified electrician.

Figure 4.1: Wiring diagram for the Akicon Humidity Sensor and Light Switch, showing connections for line, night light, lighting LED, fan, neutral wire, and ground wire.

• Connect the LINE wire (typically black) from your electrical box to the corresponding LINE terminal on the switch.
• Connect the Neutral Wire (typically white) from your electrical box to the Neutral terminal on the switch.
• Connect the FAN wire from your exhaust fan to the FAN terminal (Out3) on the switch.
• Connect the LED Light wire from your light fixture to the LIGHTING LED terminal (Out2) on the switch.
• Connect the Night Light wire from your light fixture to the NIGHT LAMP terminal (Out1) on the switch.
• Ensure the Ground Wire (typically green or bare copper) is properly connected to the electrical box and the switch's ground terminal.

4.3 Memasang Suis

1. After wiring, carefully place the switch into the wall box.
2. Secure the switch to the wall box using the provided screws. Do not overtighten.
3. Attach the decorative wall plate (not included with switch, typically comes with fan) over the switch.

4.4 Panduan Video Pemasangan

5. Arahan Operasi

The Akicon Humidity Sensor and Light Switch offers both automatic and manual control options for your bathroom fan and lights.

5.1 Humidity Sensor Operation (Auto Mode)

• The switch detects ambient humidity levels. When humidity exceeds the preset threshold, the fan will automatically turn ON.
• Once the humidity drops below the set value, the fan will continue to run for an additional 5 minutes before turning OFF.
• To adjust humidity sensitivity: Use the small dial or button (refer to Figure 1.2 for location) to select one of 5 levels: 90%, 80%, 70%, 60%, or 50%.

5.2 Fungsi Pemasa

• The timer function allows you to set the fan to run for a specific duration.
• To activate the timer: Press the fan button. The fan will run for the preset time.
• To adjust timer duration: Use the small dial or button (refer to Figure 1.2 for location) to select one of 5 durations: 5, 15, 30, 45, or 60 minutes.
• Note: If the timer is set to OFF, manually turning on the light will not activate auto mode. If the humidity condition is set to OFF, the device will not go into auto mode.

5.3 Kawalan Manual

• Suis Kipas: Simply press the fan button to manually turn the fan ON or OFF. When manually turned ON, the fan will switch to auto mode after running for a specified time. When manually turned OFF, it will switch to auto mode after 10 minutes.
• Suis Lampu LED: Press the light button to cycle through different color temperatures (2700K/4000K/5500K) within 2 seconds.
• Suis Lampu Malam: Press the night light button to turn the integrated night light ON or OFF.

Figure 5.1: The integrated switch allows separate wiring and control of fan, light, and nightlight functions.

6. Penyelenggaraan

• Pembersihan: To clean the switch, first ensure power is OFF at the circuit breaker. Use a soft, damp cloth to wipe the surface. Do not use abrasive cleaners or solvents.
• Pemeriksaan biasa: Periodically check the switch for any signs of damage or loose connections. If any issues are found, turn off power and consult a qualified electrician.
• Penentukuran Penderia Kelembapan: The humidity sensor is factory calibrated. If you suspect inaccurate readings, ensure the sensor area is free from obstructions and excessive dust.

7. Penyelesaian masalah

For issues not listed above, please contact Akicon Customer Service.

8. Waranti dan Sokongan

This Akicon Humidity Sensor and Light Switch comes with a Waranti 3 tahun dari tarikh pembelian.

The warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, misuse, abuse, or unauthorized repairs.

Perkhidmatan Pelanggan:

If you have any questions, require technical assistance, or need to claim warranty service, please contact Akicon customer service. Our professional customer service team is available 24/7 to assist you.

For the most up-to-date contact information, please visit the official Akicon webtapak atau rujuk butiran hubungan yang diberikan bersama pembungkusan produk anda.