Manual Arahan Pengisar Kopi Manual Normcore V3

pengenalan

Thank you for choosing the Normcore Manual Coffee Grinder V3. This precision-engineered hand grinder is designed to provide consistent and high-quality grinds for various brewing methods, from fine espresso to coarse French press. This manual will guide you through the setup, operation, and maintenance of your new grinder to ensure optimal performance and longevity.

Apa yang ada dalam Kotak

Your Normcore Manual Coffee Grinder V3 package includes the following items:

• 1 - Manual Coffee Grinder
• 1 - Silicone Rubber Band
• 1 - Air Blower
• 1 - Cleaning Brush
• 1 - Eva Carrying Case
• 1 - User Manual (this document)

Spesifikasi

Persediaan

1. Unpack the Grinder: Carefully remove all components from the Eva carrying case.
2. Assemble the Crank Arm: Insert the crank arm into the top shaft of the grinder. The silicone band can be used to secure the crank arm for storage or to provide a better grip during grinding.
3. Laraskan Tetapan Pengisaran:
   • Unscrew the bottom grounds catcher.
   • Locate the grind adjustment dial at the bottom of the main grinder body, near the burr.
   • Turn the dial clockwise for a finer grind and counter-clockwise for a coarser grind. The grinder features 24 stepped clicks per rotation, with each click adjusting the grind size by approximately 20 microns.
   • Refer to the table below for recommended starting grind settings for common brewing methods.

   

Recommended Grind Settings (Starting Points)

Arahan Operasi

1. Sediakan Kacang: Measure your desired amount of whole coffee beans. The grinder's hopper has a maximum capacity of 25g.
2. Muatkan Kacang: Remove the top lid and carefully pour the measured coffee beans into the hopper. Replace the lid.
3. Kisar Kopi: Hold the grinder firmly with one hand (utilizing the silicone band for better grip if desired) and turn the crank arm clockwise with the other hand. Continue grinding until all beans have passed through the burrs and into the grounds catcher.
4. Retrieve Grounds: Unscrew the bottom grounds catcher to access your freshly ground coffee.

Video Produk Rasmi

Official product videos from the seller are not available at this time. Please refer to the written instructions and diagrams for guidance.

Penyelenggaraan

Regular cleaning ensures the longevity and consistent performance of your Normcore Manual Coffee Grinder V3. Do not wash the burrs or internal components with water, as this can lead to rust and damage.

1. Pembongkaran: Unscrew the bottom grounds catcher. You may also carefully remove the burr adjustment dial and the burr assembly for a deeper clean if necessary.
2. Pembersihan berus: Use the provided cleaning brush to gently brush away any residual coffee grounds from the burrs, internal chamber, and grounds catcher.
3. Peniup Udara: Use the provided air blower to dislodge any stubborn fine particles from the burrs and internal mechanisms. Direct short bursts of air into the burr area.
4. Pemasangan semula: Once clean, reassemble the grinder by carefully placing the burr assembly back, followed by the adjustment dial and the grounds catcher. Ensure all parts are securely tightened.

Menyelesaikan masalah

Waranti & Sokongan

For warranty information, product support, or to purchase replacement parts, please refer to the official Normcore website or contact their customer service directly. Contact details are typically provided on the product packaging or the manufacturer's official online channels.

Anda boleh melawat Normcore Store on Amazon untuk maklumat lanjut.