1. Pengenalan
This manual provides essential information for the safe and effective operation of your SHEHDS 200W COB Par Light. This professional stage lighting fixture features a 200W COB LED, offering both cool white (4500K) and warm white (3500K) illumination. Designed with an IP65 waterproof rating and a fanless, muted operation, it is suitable for various indoor and outdoor applications. Please read this manual thoroughly before installation and use.
2. Arahan Keselamatan
- Keselamatan Elektrik: Pastikan bekalan kuasa voltage matches the specified requirements of the fixture. Always connect to a grounded power outlet. Disconnect power before any service or maintenance.
- Pemasangan: Install the fixture in a well-ventilated area, away from flammable materials. Ensure mounting surfaces and hardware can support the weight of the fixture.
- Suhu: Do not operate the fixture in environments exceeding 40°C (104°F). Allow adequate space around the fixture for heat dissipation.
- Perlindungan Mata: Elakkan pendedahan mata secara langsung kepada sumber cahaya, kerana ia boleh menyebabkan kerosakan mata.
- Penilaian Kalis Air: The fixture is IP65 rated, meaning it is protected against dust and low-pressure water jets. While suitable for outdoor use in rain, avoid submerging the unit.
- Penyelenggaraan: Rujuk semua servis kepada kakitangan yang berkelayakan. Jangan cuba membaiki unit ini sendiri.
3. Kandungan Pakej
Sahkan bahawa semua item ada semasa membongkar:
- SHEHDS 200W COB Par Light (1 unit)
- Instruction Manual (1 copy)
- Signal Line (1 unit)
- Kord Kuasa (1 unit)
Image: Contents of the SHEHDS 200W COB Par Light package.
4. Produk Lebihview dan Ciri
The SHEHDS 200W COB Par Light is engineered for robust performance and versatility in various lighting scenarios.
- Reka bentuk kalis air IP65: Features a durable cast aluminum shell with waterproof signal lines, power cords, and control buttons, ensuring reliable operation in outdoor conditions.
- High-Brightness COB LED: Equipped with a 200W COB (Chip-on-Board) LED, providing uniform and powerful cool white (4500K) or warm white (3500K) illumination. The light is designed to be non-glare and eye-safe.
- Fanless Muted Operation: Operates silently without a cooling fan, making it ideal for environments where noise reduction is critical.
- Sudut Rasuk Lebar: Offers a beam angle of 65°-70°, with an effective range of up to 10 meters.
- Strobe and Dimmer Functions: Includes a shuttle flash rate of 0-10Hz and a 0-100% mechanical dimmer for dynamic lighting effects.
- Pembinaan Tahan Lama: Built with a sturdy aluminum alloy shell and a long-lasting COB light source, ensuring an LED lifespan exceeding 60,000 hours.
Imej: Depan view of the SHEHDS 200W COB Par Light, illustrating its cool and warm white capabilities and IP65 rating.
Image: Close-up of the light's waterproof design and rear control panel.
5. Persediaan dan Pemasangan
The SHEHDS 200W COB Par Light is designed for flexible installation. Always ensure the fixture is securely mounted to prevent accidents.
5.1 Pilihan Pemasangan
- Pemasangan Lantai: The integrated dual mounting brackets allow the light to be placed directly on a flat surface. Adjust the angle using the durable knobs on the sides.
- Pemasangan Siling/Kekuda: The flexible dual mounting brackets can also be used to hang the fixture from a ceiling or truss system. Ensure appropriate clamps and safety cables (not included) are used and rated for the fixture's weight (approximately 10.78 lbs / 5.05 kg).
5.2 Sambungan Kuasa
Connect the provided power cord to the fixture's power input and then to a suitable grounded power outlet. Ensure the power source meets the fixture's electrical requirements.
5.3 Sambungan DMX (Pilihan)
For DMX control, connect a DMX signal line from your DMX controller to the DMX IN port of the fixture. For multiple fixtures, daisy-chain them by connecting the DMX OUT of the first fixture to the DMX IN of the next, and so on. The fixture uses waterproof DMX connectors; ensure you use compatible cables or adapters.
Image: Dimensions and weight of the SHEHDS 200W COB Par Light.
6. Arahan Operasi
The SHEHDS 200W COB Par Light can be operated via its onboard control panel or an external DMX controller.
6.1 Panel Kawalan Atas Papan
The back control panel features a digital display and buttons to navigate menus and adjust settings. Press the 'Menu' button to cycle through options, 'Up'/'Down' to change values, and 'Enter' or 'OK' to confirm. Specific modes and settings include:
- Tetapan Alamat DMX: Set the DMX starting address for external control. Once set and confirmed, the address is preserved even after power cycling.
- Pemalap Manual: Adjust the light intensity from 0-100%.
- Kesan Strob: Activate and adjust the flash rate from 0-10Hz.
- Pilihan Warna: Switch between Cool White (4500K) and Warm White (3500K) modes.
Imej: Cthamples of warm white and cool white lighting effects.
Image: Direct comparison of warm white and cool white output.
7. Kawalan DMX
The SHEHDS 200W COB Par Light is compatible with DMX512 protocol, allowing for professional control over its functions.
7.1 DMX Channel Assignment
Refer to the specific DMX channel chart provided with your fixture for detailed channel assignments. Typically, channels will control:
- Channel 1: Dimmer Utama (0-100%)
- Channel 2: Intensiti Putih Sejuk
- Channel 3: Intensiti Putih Hangat
- Channel 4: Strobe Speed (0-10Hz)
Consult the fixture's display for the current DMX address and mode settings. Ensure your DMX controller is configured to match the fixture's address and channel mode.
8. Penyelenggaraan
Regular maintenance ensures optimal performance and extends the lifespan of your SHEHDS 200W COB Par Light.
- Pembersihan: Periodically clean the lens and exterior housing with a soft, lint-free cloth. Do not use abrasive cleaners or solvents.
- Pemeriksaan: Regularly check power and signal cables for any signs of damage. Ensure all mounting hardware is secure.
- Storan: When not in use, store the fixture in a dry, dust-free environment.
9. Penyelesaian masalah
If you encounter issues with your SHEHDS 200W COB Par Light, refer to the following common problems and solutions:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Cahaya tidak menyala. | Tiada bekalan kuasa; kabel rosak; masalah dalaman. | Periksa sambungan dan soket kuasa. Uji dengan kabel kuasa yang berbeza. Jika masalah berterusan, hubungi sokongan. |
| Tiada kawalan DMX. | Alamat DMX salah; kabel DMX rosak; isu pengawal DMX; mod DMX salah. | Verify DMX address on fixture and controller. Check DMX cable connections. Ensure DMX mode is active on the fixture. |
| Light output is inconsistent or flickering. | Unstable power supply; DMX signal interference; internal component issue. | Ensure stable power. Check DMX connections for interference. If problem persists, contact support. |
| Fixture becomes excessively hot. | Poor ventilation; prolonged operation in high ambient temperature. | Ensure adequate airflow around the fixture. Reduce ambient temperature if possible. |
10. Spesifikasi
Technical specifications for the SHEHDS 200W COB Par Light (Model: 200W_IP65).
| Ciri | Perincian |
|---|---|
| Sumber Cahaya | LED COB 1 x 200W |
| Suhu Warna | Cool White (4500K) / Warm White (3500K) |
| Wattage | 200 Watt |
| Sudut Rasuk | 65-70 Darjah |
| Lebih malap | 0-100% Mechanical Dimmer |
| Kadar Strobe | 0-10Hz |
| Mod Kawalan | DMX512, Manual Control |
| Saluran DMX | Refer to product-specific DMX chart |
| Penarafan IP | IP65 (kalis air) |
| bahan | Aloi Aluminium |
| Dimensi (L x W x H) | 3"P x 9"L x 11"T (lebih kurang 7.6cm P x 22.9cm L x 27.9cm T) |
| Berat badan | 10.78 paun (lebih kurang 5.05 kg) |
| Sumber Kuasa | Elektrik Bertali |
| Amppemadam | 2 Amps |
11. Waranti dan Sokongan
SHEHDS products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the contact information provided at the point of purchase or visit the official SHEHDS webtapak. Simpan resit pembelian anda sebagai bukti pembelian untuk tuntutan waranti.