Ledlenser HF6R Core LED Headlamp Manual Arahan

1. Pengenalan

The Ledlenser HF6R Core is a slim, high-performance headlamp designed for intuitive use in various activities such as hiking, DIY, camping, and work. It combines a lightweight design with powerful illumination and advanced features to enhance your experience in low-light conditions.

This manual provides essential information on the proper setup, operation, maintenance, and troubleshooting of your HF6R Core headlamp. Please read it thoroughly before first use and keep it for future reference.

2. Arahan Keselamatan

• Keselamatan Mata: Do not look directly into the LED light or shine it into the eyes of others. The bright light can cause temporary vision impairment or eye damage.
• Amaran Panas: kepalaamp's housing may become hot during prolonged use, especially at higher brightness settings. Handle with care to avoid burns.
• Keselamatan Bateri: The device contains a built-in rechargeable Lithium-ion battery. Do not attempt to replace the battery yourself. Do not expose the battery to extreme temperatures, direct sunlight, or fire.
• Pendedahan Air: Manakala kepalaamp is IP68 waterproof, ensure the magnetic charging port is clean and dry before charging to prevent damage.
• Kanak-kanak: Jaga kepalaamp di luar jangkauan kanak-kanak.

3. Kandungan Pakej

Sahkan bahawa semua item terdapat dalam pakej anda:

• Ledlenser HF6R Core Headlamp (dengan bateri boleh dicas semula terbina dalam)
• Pad Keselesaan
• Sambungkan Penyesuai
• USB Charging Cable (USB-C to Magnetic Charger)

4. Persediaan

4.1 Memasang Headlamp

Letakkan kepalaamp on your head with the light unit positioned at the front. Adjust the elastic headband for a comfortable and secure fit. The comfort pad can be positioned to reduce pressure points.

4.2 Melaraskan Lamp kepala

Lamp head is tiltable, allowing you to direct the light beam up or down to suit your needs. Gently tilt the headlamp unit to the desired angle.

Image: A person wearing the Ledlenser HF6R Core headlamp, demonstrating its use in an outdoor setting.

5. Arahan Operasi

5.1 Hidup/Mati Kuasa dan Pelarasan Kecerahan

Tekan butang kuasa sekali untuk memusingkan kepalaamp on. Subsequent presses will cycle through the 3 brightness levels: Low, Mid, Power. To activate Boost mode, double-press the power button. Press and hold the power button to turn the headlamp off from any mode.

Imej: Ilustrasi kepalaamp's light functions, highlighting the three brightness levels and the red light feature.

5.2 Red Light Function

The HF6R Core includes a red light function, useful for preserving night vision or for signaling. Refer to the specific button sequence in the full manual for activation.

5.3 Digital Advanced Focus System

The Digital Advanced Focus System allows for seamless adjustment between a wide floodlight and a focused spot beam. Use the integrated wheel control to adjust the beam according to your needs, providing versatile illumination for various tasks and environments.

Imej: Dari dekat view daripada tajukamp in use, illustrating the effect of the Digital Advanced Focus System.

5.4 Kunci Suis

To prevent accidental activation during transport or storage, the HF6R Core features a switch lock function. Consult the full manual for instructions on how to activate and deactivate this feature.

6. Mengecas

The Ledlenser HF6R Core features a built-in rechargeable Lithium-ion battery and a convenient magnetic charging system.

6.1 Prosedur Pengecasan

1. Connect the USB-C end of the provided charging cable to a suitable USB power source (e.g., wall adapter, power bank, computer USB port).
2. Attach the magnetic charger end of the cable to the magnetic charging port on the headlampPastikan sambungan yang selamat.
3. The battery status indicator will show the charging progress. A full charge takes approximately 3.75 hours.
4. Setelah dicas sepenuhnya, cabut kabel pengecasan.

Image: Individuals using Ledlenser HF6R Core headlamps, with one headlamp shown connected to its magnetic charger.

6.2 Petunjuk Status Bateri

kepalaamp is equipped with a battery status indicator to show the remaining battery life. Refer to the full manual for detailed information on indicator light patterns.

7. Penyelenggaraan

7.1 Pembersihan

Thanks to its IP68 waterproof rating, the HF6R Core can be easily cleaned. If the headlamp becomes dirty, you can rinse it under running water. Ensure the magnetic charging port is dry before charging.

Image: The Ledlenser HF6R Core headlamp partially submerged in water, demonstrating its IP68 waterproof capability.

7.2 Penyimpanan

Simpan kepalaamp in a cool, dry place away from direct sunlight and extreme temperatures. For long-term storage, it is recommended to charge the battery to approximately 50% every few months to maintain battery health.

8. Penyelesaian masalah

• Ketuaamp tidak dihidupkan:
  • Check if the battery is charged. Connect to the charger and observe the battery indicator.
  • Ensure the switch lock function is not activated.
• Cahaya malap atau berkelip-kelip:
  • The battery level might be low. Recharge the headlamp.
  • Pastikan kanta bersih dan bebas daripada halangan.
• Pengecasan tidak berfungsi:
  • Verify that the USB cable and power source are functioning correctly.
  • Ensure the magnetic charging contacts on both the cable and the headlamp adalah bersih dan bebas daripada serpihan.

If you encounter issues not covered here, please contact Ledlenser customer support.

9. Spesifikasi

Image: The Ledlenser HF6R Core headlamp, highlighting its slim profile, approximate thickness of 34mm, and weight of 126g (including battery).

10. Waranti dan Sokongan

10.1 Maklumat Waranti

Your Ledlenser HF6R Core headlamp datang dengan a Waranti 2 tahunWaranti ini boleh dilanjutkan kepada 7 tahun by registering your product online after purchase. Please visit the official Ledlenser website for product registration details and terms and conditions.

10.2 Sokongan Pelanggan

Untuk bantuan lanjut, sokongan teknikal atau tuntutan jaminan, sila hubungi khidmat pelanggan Ledlenser melalui khidmat pelanggan rasmi mereka. website or the retailer where you purchased the product. Have your product model and serial number ready when contacting support.