IMALEN LD70
IMALENT LD70 Pocket EDC Flashlight
Manual Pengguna
Model: LD70 | Brand: IMALENT
1. Produk Lebihview
The IMALENT LD70 is a compact and powerful Everyday Carry (EDC) flashlight designed for various applications, including camping, hiking, and general outdoor use. It features a high-performance CREE XHP70.2 LED, a built-in rechargeable battery, and an intuitive OLED display.

Figure 1: The IMALENT LD70 Pocket EDC Flashlight in Fruit Green, showcasing reka bentuknya yang padat.
2. Persediaan
Before first use, ensure the IMALENT LD70 flashlight is fully charged. The device comes with a built-in rechargeable battery.
2.1 Mengecas Bateri
- Locate the magnetic charging port at the tail cap of the flashlight.
- Connect the magnetic USB charging cable (included) to the charging port.
- Connect the other end of the USB cable to a standard USB power source (e.g., computer, wall adapter).
- The OLED display will indicate charging status. Charging is complete when the display shows a full battery icon or stable voltage.

Figure 2: The IMALENT LD70 flashlight, highlighting its built-in rechargeable battery and magnetic charging capability. The battery provides up to 15 hours of maximum runtime.
3. Arahan Operasi
The IMALENT LD70 features a single button switch for all operations, including power on/off and mode switching.
3.1 Hidupkan/Mati Kuasa
- Untuk Menghidupkan: Press the power switch button once. The flashlight will turn on at the last used brightness level (mode memory).
- Untuk Mematikan: Press and hold the power switch button for approximately 0.5 seconds.
3.2 Brightness Levels (Modes)
The LD70 offers 6 distinct modes:
- Menukar Mod: While the flashlight is on, single-click the power switch button to cycle through the brightness levels: 20 lumens, 200 lumens, 900 lumens, 2000 lumens.
- Mod Turbo: Double-click the power switch button rapidly from any mode (or from off) to activate Turbo mode (4000 lumens). Double-click again to return to the previous mode.
- Mod Strob: Triple-click the power switch button rapidly from any mode (or from off) to activate Strobe mode. Single-click to exit Strobe mode.

Figure 3: The IMALENT LD70 demonstrating its powerful 4000-lumen output, capable of illuminating objects up to 203 meters away.
3.3 Fungsi Paparan OLED
The integrated OLED display provides real-time information about the flashlight's status.
- Menyemak Bateri Voltage: Press the power switch button three times rapidly to display the built-in battery voltage.
- Tahap Kecerahan: The display shows the current brightness level in lumens.
- Mod Kunci Keluar: The display indicates when the flashlight is in lockout mode.

Figure 4: The OLED display on the IMALENT LD70, showing indicators for brightness level, battery voltage, and lockout mode. Pressing the power switch three times allows checking the battery voltage.
3.4 Fungsi Lockout
To prevent accidental activation, the LD70 features a lockout function.
- Untuk mengunci: While the flashlight is off, press and hold the power switch button for approximately 3 seconds until the OLED display shows a lock icon.
- Untuk Membuka Kunci: Press and hold the power switch button for approximately 3 seconds until the OLED display shows an unlock icon and the flashlight turns on.
4. Penyelenggaraan
Proper maintenance ensures the longevity and optimal performance of your IMALENT LD70 flashlight.
- Pembersihan: Lap badan lampu suluh dengan kain yang bersih dan lembut. Untuk kotoran degil, gunakan sedikit kainamp kain boleh digunakan. Jangan gunakan bahan kimia atau bahan pelelas yang keras.
- Tahan Air: The LD70 is IPX-8 water-resistant, meaning it can withstand continuous immersion in water up to 2 meters. Ensure the charging port is clean and dry before charging after exposure to water.
- Storan: Store the flashlight in a cool, dry place away from direct sunlight and extreme temperatures. If storing for extended periods, charge the battery periodically to maintain its health.
- Penjagaan Bateri: Avoid fully depleting the battery frequently. Recharge the battery when the OLED display indicates low voltage.
5. Penyelesaian masalah
If you encounter issues with your IMALENT LD70, refer to the following common problems and solutions:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Lampu suluh tidak menyala. | Bateri lemah; Mod penguncian diaktifkan. | Charge the battery; Unlock the flashlight (press and hold button for 3 seconds). |
| Brightness is lower than expected. | Low battery; Incorrect mode selected. | Charge the battery; Cycle through modes to select a higher brightness level or activate Turbo mode. |
| OLED display is blank or not updating. | Low battery; Malfunction. | Charge the battery; If issue persists, contact customer support. |
| Lampu suluh menjadi panas semasa digunakan. | Normal operation at high brightness. | This is normal for high-lumen flashlights. Reduce brightness if it becomes uncomfortable. The flashlight has built-in thermal regulation. |
6. Spesifikasi
Detailed specifications for the IMALENT LD70 Pocket EDC Flashlight:
- LED: 1 x CREE XHP70.2 LED
- Output Maksimum: 4000 Lumen
- Jarak Pancaran Maksimum: 203 meters (approximately 667 feet)
- Sumber Kuasa: Bateri Boleh Dicas Semula Terbina dalam
- Maximum Runtime: Up to 15 hours (at lowest setting)
- Mod Kecerahan: 20lm, 200lm, 900lm, 2000lm, Turbo (4000lm), Strobe
- Bahan: Aloi Aluminium gred tentera
- Tahan Air: IPX-8 standard (submersible up to 2 meters)
- Rintangan Kesan: Withstands drops from 1.5 meters (59 inches)
- Dimensi: Length: 3.18 inches (81mm), Bezel Diameter: 0.98 inches (25mm)
- Ciri Khas: OLED Display, Magnetic USB Charging, Pocket-friendly Compact Chassis

Rajah 5: Satu terperinci view of the IMALENT LD70's light source, utilizing an American Cree XHP70 2nd LED, which has a lifespan of up to 50,000 hours.
7. Waranti dan Sokongan
For warranty information, product support, or any inquiries not covered in this manual, please contact IMALENT customer service or visit the official IMALENT brand store.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.