AsperX AX260 3000A Jump Starter with Air Compressor User Manual

1. Maklumat Keselamatan

Baca semua amaran keselamatan, arahan, ilustrasi dan spesifikasi yang diberikan bersama produk ini. Kegagalan mematuhi semua arahan yang disenaraikan di bawah boleh mengakibatkan renjatan elektrik, kebakaran dan/atau kecederaan serius.

• Sentiasa memakai pelindung mata semasa bekerja dengan bateri.
• Do not operate the jump starter if it is damaged.
• Jauhkan jump starter daripada kanak-kanak.
• Jangan dedahkan produk kepada keadaan hujan atau basah.
• Ensure proper polarity connection (red to positive, black to negative) to avoid sparks or damage.
• Do not use the air compressor continuously for extended periods to prevent overheating. Allow it to cool down between uses.
• Simpan peranti di tempat yang sejuk dan kering jauh dari cahaya matahari langsung.

2. Kandungan Pakej

Sahkan bahawa semua item terdapat dalam pakej anda:

• 1 x AsperX AX260 Jump Starter with Air Compressor
• 1 x Kabel Pelompat Pintar
• 1 x Kabel USB-A ke USB-C
• 1 x Membawa Beg
• 1 x Pump Tube
• 3 x Muncung Udara
• 1 x Manual Pengguna

3. Produk Lebihview

The AsperX AX260 is a versatile device combining a powerful jump starter, an air compressor, a power bank, and an LED flashlight. It features a 3.4-inch LCD display for easy operation and monitoring.

Ciri-ciri utama termasuk:

• Arus Puncak 3000A: Capable of starting 12V vehicles with up to 10L Gas and 8.0L Diesel engines.
• Pemampat Udara 150 PSI: Features tire pressure detection and adjustable inflation modes (PSI, BAR, KPA).
• Advanced Battery Protection System: Over 10 types of safety protections for secure operation.
• Lampu LED 400-Lumen: Offers constant lighting, flash, and SOS modes.
• Fungsi Bank Kuasa: USB-A output and USB-C input for charging electronic devices.

4. Persediaan

Before initial use, fully charge the AsperX AX260 jump starter. Use the provided USB-A to USB-C cable to charge the device. The LCD display will indicate the charging status.

5. Arahan Operasi

5.1. Lompat Memulakan Kenderaan

The AX260 can jump start 12V vehicles with up to 10L gas or 8.0L diesel engines.

1. Insert the smart jumper cable into the 12V auto start connector port on the AX260 jump starter.
2. Sambungkan cl merahamp ke terminal positif (+) bateri kenderaan dan cl hitamamp ke terminal negatif (-).
3. Ensure the connections are secure. The LCD display on the jump starter will indicate correct operation. If the car battery voltage is below 0V, press the 'BOOST' button on the jump starter.
4. Start your car engine immediately.
5. Once the engine starts, remove the jumper cables from the vehicle battery, then from the jump starter.

5.2. Menggunakan Pemampat Udara

The AX260's air compressor supports 3 optional units (PSI, BAR, KPA) and features automatic inflation stop.

1. Connect the pump tube to the air inflation opening on the AX260.
2. Attach the appropriate air nozzle to the pump tube and secure it to the item you wish to inflate (e.g., tire valve).
3. Press the 'M' button to select the desired inflation mode (car, motorcycle, bicycle, ball).
4. Use the '+' and '-' buttons to set the target pressure.
5. Long press the 'OK' button to start inflation. The device will automatically stop once the set pressure is reached.

5.3. Fungsi Bank Kuasa

The AX260 can charge various electronic devices via its USB ports.

• Connect your device's charging cable to the USB-A output port on the AX260.
• Peranti akan mula dicas secara automatik.

5.4. Lampu suluh LED

The 400-lumen LED light offers multiple modes for different situations.

• Tekan lamp switch button to cycle through the modes: constant lighting, flash, and SOS.
• Pegang lamp switch button to turn off the light.

6. Penyelenggaraan

• Recharge the jump starter every 3-6 months, even if not in use, to maintain battery health.
• Bersihkan peranti dengan kain kering dan lembut. Jangan gunakan bahan kimia yang keras atau bahan yang melelas.
• Simpan di tempat yang sejuk dan kering. Elakkan suhu yang melampau.

7. Penyelesaian masalah

• Peranti tidak dihidupkan: Ensure the device is charged. If fully charged and still not turning on, contact customer support.
• Kenderaan tidak boleh dihidupkan: Check that the jumper cables are correctly connected to the battery terminals. Ensure the jump starter has sufficient charge. If the battery is deeply discharged (below 0V), use the 'BOOST' function.
• Pemampat udara tidak mengembang: Verify the pump tube and air nozzle are securely attached. Check that the desired pressure is set and the 'OK' button is long-pressed to start. Ensure the device has sufficient charge.
• Air compressor overheating: If the air compressor becomes hot during use, allow it to cool down for several minutes before resuming operation. Continuous use for very long periods can cause overheating.
• Incorrect tire pressure reading: Ensure the air nozzle is properly sealed to the tire valve.

8. Spesifikasi

9. Video Produk Rasmi

The following videos provide additional information and demonstrations of the AsperX AX260 Jump Starter with Air Compressor:

10. Waranti dan Sokongan

For warranty information or technical support, please refer to the contact details provided in your product packaging or visit the official AsperX webtapak. Simpan resit pembelian anda untuk tuntutan waranti.