OOOUSE 1200Mbps Dual-Band WiFi Repeater User Manual

1. Pengenalan

Thank you for choosing the OOOUSE 1200Mbps Dual-Band WiFi Repeater. This device is designed to extend your existing wireless network coverage, eliminate Wi-Fi dead zones, and provide a strong, reliable internet connection throughout your home or office. It supports both 2.4GHz and 5GHz bands, offering high-speed data transfer rates up to 1200Mbps. This manual will guide you through the setup, operation, and troubleshooting of your new WiFi repeater.

Figure 1: OOOUSE 1200Mbps Dual-Band WiFi Repeater

2. Ciri-ciri Produk

• Kelajuan Tinggi Dwi-Jalur: Supports 2.4GHz (up to 300Mbps) and 5GHz (up to 1200Mbps) for a combined speed of 1200Mbps, ensuring fast and stable connections.
• Liputan Lanjutan: Equipped with four 5dBi omni-directional antennas to boost WiFi signal and eliminate dead zones, covering an area of 80 to 100 square meters.
• Fungsi 3-dalam-1: Operates as a WiFi Repeater, Access Point (AP), or Router, offering versatile networking solutions.
• Keserasian Universal: Works with 99% of standard WiFi routers and all WiFi-enabled devices, including PCs, laptops, smartphones, tablets, Smart TVs, and TV boxes.
• Port Ethernet: Features two RJ45 network ports for wired connections, allowing the repeater to function as a wireless access point for wired devices.
• Persediaan Mudah: Simple configuration via web interface or WPS button for quick and hassle-free installation.

Figure 2: High-Performance Antennas and Speed

Figure 3: Signal Coverage Extension

Figure 4: 3-in-1 Operating Modes

Figure 5: Universal Device Compatibility

Figure 6: Ethernet Ports and Controls

3. Kandungan Pakej

Upon opening the package, please verify that you have received the following items:

• OOOUSE 1200Mbps Dual-Band WiFi Repeater (XL-Z04)
• Manual Pengguna (dokumen ini)

4. Panduan Persediaan

4.1 Hidupkan Kuasa Awal

1. Plug the WiFi Repeater into an electrical outlet near your main router.
2. Wait for the Power LED indicator to light up, indicating the device is powered on.

4.2 Configuring Repeater Mode via Web Interface (Recommended)

This method provides full control over settings and is recommended for optimal performance.

1. Connect to Repeater's Network: On your smartphone, tablet, or computer, go to your Wi-Fi settings. Find and connect to the network named "Repeater_2.4G_XXXXXX" or "Repeater_5G_XXXXXX" (the XXXXXX will be part of the device's MAC address). No password is required for the initial connection.
2. Akses Web Antara muka: Buka a web pelayar (cth., Chrome, Firefox, Safari) dan taip 192.168.11.1 ke dalam bar alamat, kemudian tekan Enter.
3. log masuk: If prompted, the default username and password are usually admin (or check the label on the device).
4. Pilih Mod: On the setup page, select "Repeater Mode" (sometimes labeled "WISP Mode").
5. Imbas untuk Rangkaian: The repeater will scan for available Wi-Fi networks. Select your home Wi-Fi network (SSID) from the list.
6. Masukkan Kata Laluan: Enter the Wi-Fi password for your home network. You can choose to keep the same SSID for the extended network or create a new one.
7. Gunakan Tetapan: Click "Apply" or "Finish" to save the settings. The repeater will restart.
8. Sambung semula: Once the repeater restarts, reconnect your devices to the newly extended Wi-Fi network (either your original SSID or the new one you created).

Figure 7: Wireless Configuration via Smartphone/Tablet

4.3 WPS Setup (Wi-Fi Protected Setup)

WPS offers a quick way to connect without accessing the web interface, but it may not be supported by all routers.

1. Plug the repeater into an electrical outlet.
2. Tekan butang WPS pada penghala utama anda.
3. Within two minutes, press the WPS/Reset button on the side of the OOOUSE WiFi Repeater.
4. Wait for the indicator lights on the repeater to show a stable connection, indicating successful pairing.

5. Mod Operasi

The OOOUSE WiFi Repeater supports three main operating modes:

• Repeater Mode (WISP Mode): Extends the range of an existing wireless network. It connects to your main router wirelessly and rebroadcasts the signal, effectively expanding coverage.
• Mod Titik Akses (AP): Converts a wired network connection into a wireless one. Connect the repeater to your router via an Ethernet cable, and it will create a new Wi-Fi hotspot.
• Mod Penghala: Functions as a basic router, creating a new private network. This mode is typically used when you have a modem but no router, or if you want to create a separate network.

6. Penyelenggaraan

• penempatan: For optimal performance, place the repeater halfway between your router and the Wi-Fi dead zone. Avoid placing it near large metal objects, concrete walls, or other electronic devices that may cause interference.
• Pembersihan: Gunakan kain lembut dan kering untuk membersihkan peranti. Jangan gunakan pembersih cecair atau aerosol.
• Menetapkan semula Peranti: If you encounter persistent issues or wish to reconfigure the device from scratch, you can perform a factory reset. With the device powered on, press and hold the WPS/Reset button for approximately 7-8 seconds until the indicator lights flash. The device will then revert to its factory default settings.

7. Penyelesaian masalah

• Tiada Akses Internet Selepas Persediaan:
  • Ensure the repeater is successfully connected to your main router's Wi-Fi network. Check the signal indicator lights.
  • Verify that the Wi-Fi password entered during setup was correct.
  • Try restarting both your main router and the repeater.
  • Perform a factory reset on the repeater and try the setup process again.
• Kelajuan Perlahan atau Isyarat Lemah:
  • Relocate the repeater closer to your main router, but still within the area where you need extended coverage.
  • Ensure there are no major obstructions (thick walls, large appliances) between the repeater and your devices, or between the repeater and the main router.
  • Periksa gangguan daripada peranti elektronik lain (telefon tanpa wayar, ketuhar gelombang mikro).
  • Ensure your main router is providing a strong signal to the repeater.
• Tidak Boleh Akses Web Halaman Pengurusan:
  • Ensure your device is connected to the repeater's Wi-Fi network (e.g., "Repeater_2.4G_XXXXXX").
  • Verify that you are typing the correct IP address: 192.168.11.1.
  • Cuba gunakan yang berbeza web pelayar.
  • Temporarily disable any VPN or firewall software on your device.
• Persediaan WPS Gagal:
  • Ensure your main router supports WPS.
  • Make sure you press the WPS button on both devices within the two-minute window.
  • Cubalah web interface setup method instead.

8. Spesifikasi

9. Waranti dan Sokongan

For warranty information and technical support, please refer to the purchase platform or contact the seller directly. Keep your proof of purchase for any warranty claims.