Jectse 4G LTE USB WiFi Modem Router Instruction Manual

1. Pengenalan

This manual provides detailed instructions for the Jectse 4G LTE USB WiFi Modem Router. This device allows you to establish a portable Wi-Fi hotspot using a 3G or 4G SIM card, or function as a USB modem when connected to a computer. It supports up to 10 users simultaneously and offers a data transfer rate of 300 Mbps.

2. Spesifikasi Produk

• Bahan Produk: ABS
• warna: putih
• Slot Kad SIM: Standard SIM card slot (SIM card not included)
• 4G LTE-FDD Bands: B1/B3/B5/B7/B8/B20
• 4G LTE-TDD Bands: 38/39/40/41
• 3G WCDMA Bands: B1/B2/B5/B8
• Jalur GSM: 900/1800/1900/850
• Standard Wi-Fi: 802.11 b/g/n
• Standard Tanpa Wayar: IEEE802.11b/g/n
• Sharing Capacity: Sehingga 10 pengguna
• Kadar Pemindahan Data: 300 Mbps
• Effective WiFi Distance: Sehingga 10 meter
• Teknologi Ketersambungan: USB, Wi-Fi
• Peranti Serasi: Smartphone, tablet, personal computer
• Sistem Operasi yang Disokong: Win 2000/2003/XP/Vista/7/8/10 (32/64-bit), OS 10.4 or higher, Linux

3. Kandungan Pakej

Sila semak pakej untuk item berikut:

• 1 x Jectse Mobile Router
• 1 x Manual Pengguna

4. Arahan Persediaan

4.1. Memasukkan Kad SIM

The Jectse 4G LTE USB WiFi Modem Router requires a standard 3G or 4G SIM card to function as a mobile hotspot.

1. Keluarkan penutup belakang peranti dengan berhati-hati.
2. Locate the standard SIM card slot.
3. Insert your activated standard SIM card into the slot, ensuring correct orientation.
4. Pasang semula penutup belakang.

Image: The Jectse 4G LTE USB WiFi Modem Router with its back cover removed, revealing the internal components and the standard SIM card slot. The device is white and red.

4.2. Sambungan Awal

The device can be powered via a USB port.

1. Connect the Jectse 4G LTE USB WiFi Modem Router to any standard USB port (e.g., computer, USB wall adapter, car USB port).
2. Peranti akan dihidupkan secara automatik.

Image: The Jectse 4G LTE USB WiFi Modem Router, a white and red USB stick, with its USB connector visible, ready to be plugged into a port.

4.3. APN Configuration (If Necessary)

Even if your SIM card is compatible, it may not be plug-and-play and you might need to disable the SIM card's PIN and configure the Access Point Name (APN) settings. This is typically done through the device's web antara muka.

• Connect your computer or mobile device to the router's Wi-Fi network (SSID and password are usually printed on the device or its packaging).
• Buka a web browser and enter the router's IP address (e.g., 192.168.100.1, often printed on the device).
• Log in using the default username and password (e.g., admin/admin, often printed on the device).
• Navigasi ke tetapan rangkaian atau bahagian tetapan APN.
• Masukkan butiran APN yang betul yang diberikan oleh operator rangkaian mudah alih anda.
• Save the settings and restart the device if prompted.

5. Arahan Operasi

5.1. Using as a WiFi Hotspot

Once powered on with an active SIM card and correct APN settings, the device will broadcast a Wi-Fi signal.

1. Pada telefon pintar, tablet atau komputer riba anda, cari rangkaian Wi-Fi yang tersedia.
2. Select the network name (SSID) corresponding to your Jectse router. The SSID and Wi-Fi key are typically printed on the device itself.
3. Enter the Wi-Fi key (password) to connect.
4. Up to 10 devices can connect simultaneously to the hotspot.

Image: The Jectse 4G LTE USB WiFi Modem Router shown in an outdoor setting, illustrating its portability and use for multiple users in various scenarios like travel or gatherings.

5.2. Using as a USB Modem

When connected to a computer's USB port, the device can also function as a direct USB modem, providing internet access to that computer.

1. Connect the Jectse router to an available USB port on your computer.
2. The computer should automatically detect the device and install necessary drivers. If not, refer to the troubleshooting section.
3. Once drivers are installed, the computer will establish an internet connection via the modem.

Image: A person using a laptop outdoors, with the Jectse 4G LTE USB WiFi Modem Router connected, demonstrating its use for mobile work or streaming.

6. Penyelenggaraan

To ensure optimal performance and longevity of your Jectse 4G LTE USB WiFi Modem Router, follow these general maintenance guidelines:

• Pastikan peranti bersih dan bebas daripada habuk. Gunakan kain lembut dan kering untuk pembersihan.
• Elakkan daripada mendedahkan peranti kepada suhu yang melampau, cahaya matahari langsung atau kelembapan yang tinggi.
• Jangan jatuhkan atau tundukkan peranti kepada kesan yang kuat.
• Simpan peranti di tempat yang sejuk dan kering apabila tidak digunakan.

7. Penyelesaian masalah

If you encounter issues with your Jectse 4G LTE USB WiFi Modem Router, refer to the following common solutions:

7.1. Tiada Sambungan Internet

• Semak Kad SIM: Pastikan kad SIM dimasukkan dengan betul dan diaktifkan dengan pelan data.
• Tetapan APN: Verify that the APN settings are correctly configured for your mobile network operator (refer to Section 4.3).
• SIM PIN: If your SIM card has a PIN, ensure it is disabled. This can usually be done by inserting the SIM into a smartphone and disabling the PIN lock in its settings.
• Kekuatan Isyarat: Check the signal indicator on the device. If the signal is weak or absent, move to an area with better network coverage.
• Mulakan semula Peranti: Disconnect and reconnect the device from the USB port to restart it.

7.2. Device Not Recognized as USB Modem

• Pemasangan Pemandu: Ensure that your computer's antivirus software or firewall is not blocking the installation of USB modem drivers. Temporarily disable them if necessary and try reconnecting the device.
• Port USB: Cuba sambungkan peranti ke port USB lain pada komputer anda.
• Keserasian Sistem Pengendalian: Verify that your operating system is supported (Win 2000/2003/XP/Vista/7/8/10, OS 10.4+, Linux).

Imej: Dari dekat view of the Jectse 4G LTE USB WiFi Modem Router, highlighting the signal and Wi-Fi indicator lights, which provide status information.

8. Waranti dan Sokongan

For warranty information or technical support, please refer to the documentation provided with your purchase or contact Jectse customer service. Specific details regarding spare parts availability and software updates are not provided in this manual.