DOACT 4-in-1 433MHz Universal Clone Fob Remote Control Duplicator Instruction Manual

1. Pengenalan

This manual provides comprehensive instructions for the DOACT 4-in-1 433MHz Universal Clone Fob Remote Control Duplicator. This device is designed for one-to-one key copying, allowing each key password to be saved separately for ease of use. It supports multiple copies in a row and is particularly suitable for home remote control duplication. The remote is compatible with a wide range of remote control codes within 80 bits.

Kod Serasi: 2262, 2260, 5026, 5326, 5326-3, FP527, PT2240, EV1527, HT6014, HT12E, HT640, HT680, PLC168, 9XX series, PT2292, 12L-4SC, HT6026, UM3750AM, and similar remote control types.

Image: The DOACT 4-in-1 433MHz Universal Clone Fob Remote Control Duplicator, a compact black remote with four buttons and a metal keychain clip.

2. Persediaan dan Pengaturcaraan

Follow these steps carefully to clear existing codes and copy new ones to your remote control duplicator.

2.1. Clear Existing Code

1. Press and Hold Buttons: Simultaneously press and hold the front two buttons (often labeled 'A' and 'B', or 'up/unlock' and 'down/lock' on some models) on the DOACT remote.
2. Denyar LED: The LED indicator will flash three times.
3. Release and Press: Release one of the buttons (while keeping the other pressed). Then, press the released button three times.
4. Berkelip pantas: The LED indicator will enter a fast flashing state, indicating that the code has been cleared.
5. Pengesahan: After clearing, pressing any button on the remote should not illuminate the LED indicator. If it does, repeat the clearing process.

Imej: Dari dekat view of the DOACT remote control, highlighting the four programmable buttons.

2.2. Copying a New Code

1. Alat Kawalan Jauh Kedudukan: Place your original remote control and the DOACT duplicator remote close to each other, ideally with direct contact, to ensure optimal signal transfer.
2. Press Original Button: Press and hold the desired button on your original remote.
3. Press Duplicator Button: While still holding the original remote's button, press and hold the corresponding button on the DOACT remote where you wish to store the code.
4. Pengesahan LED: Continue holding both buttons until the LED indicator on the DOACT remote flashes quickly, then becomes solid. This signifies successful code copying.
5. Ulangi untuk Butang Lain: Ulangi proses ini untuk sebarang butang lain yang anda ingin klonkan.
6. Nota Penting: If the cloning process is not successful, try clearing the code again and repeating these steps. For remotes with lower transmission power, ensure they are very close and avoid interference.

Image: A hand holding the DOACT remote control, demonstrating the action of pressing a button.

2.3. Reinstating Erased Code

If you accidentally erase a code, you can recover it by following these steps:

1. Tekan dan Tahan: Press and hold the 'C' and 'D' buttons (or equivalent buttons on other models) simultaneously for a prolonged period.
2. Denyar LED: When the LED flashes, the previously erased codes will be recovered.

2.4. Video Guide for Programming

Watch this official video for a visual demonstration of the code clearing and copying process.

3. Mengendalikan Alat Kawalan Jauh

Once programmed, your DOACT remote control duplicator functions identically to the original remote it copied. Simply press the corresponding button to activate the desired function (e.g., open/close a garage door, unlock a car).

Image: A hand holding the DOACT remote control, with a car visible in the background, illustrating its use for vehicle access.

4. Penyelenggaraan

• Pembersihan: Wipe the remote with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
• Bateri: The remote operates on a DC12V battery. If the remote's range decreases or the LED indicator becomes dim, replace the battery. To replace, carefully open the remote casing (usually by prying gently with a small flat-head screwdriver) and insert a new DC12V battery, ensuring correct polarity.
• Storan: Simpan alat kawalan jauh di tempat yang kering, jauh daripada suhu ekstrem dan cahaya matahari langsung.

5. Penyelesaian masalah

• Remote Not Programming:
  • Ensure the original remote is functioning correctly.
  • Verify that the DOACT remote's code has been completely cleared before attempting to copy.
  • Place the original and duplicator remotes as close as possible, even touching, during the copying process.
  • Try different angles or positions for the remotes during copying to ensure optimal signal reception.
  • Some original remotes may have lower transmission power, requiring closer proximity.
• Copied Code Not Working:
  • Re-attempt the copying process, ensuring the LED flashes quickly and then becomes solid.
  • Confirm that your original remote's frequency (433.92MHz for this model) is compatible with the DOACT duplicator.
• Penunjuk LED Tidak Menyala:
  • Periksa bateri. Gantikan jika perlu.
  • If the code was cleared, the LED will not light up until a new code is successfully copied.

6. Spesifikasi

7. Waranti dan Sokongan

For any product-related inquiries, technical support, or warranty claims, please refer to the seller's contact information provided at the point of purchase. Keep your purchase receipt for warranty validation.