OUKANING Industrial Floor Lamp Manual Pengguna

1. Maklumat Keselamatan Penting

Sila baca semua arahan dengan teliti sebelum pemasangan dan penggunaan. Simpan manual ini untuk rujukan masa hadapan.

• Sentiasa putuskan sambungan lamp daripada sumber kuasa sebelum membersihkan, menukar mentol atau melakukan sebarang penyelenggaraan.
• Pastikan lamp is securely supported and stable on a flat surface to prevent tipping.
• Jangan gunakan mentol melebihi wat maksimumtage dinyatakan dalam bahagian spesifikasi.
• Keep the power cord away from heat sources, sharp edges, and wet areas.
• Produk ini direka untuk kegunaan dalaman sahaja. Jangan dedahkan kepada kelembapan atau suhu yang melampau.
• Jika mana-mana bahagian lamp rosak, hentikan penggunaan dengan segera dan hubungi khidmat pelanggan.

2. Kandungan Pakej

Sahkan bahawa semua komponen hadir sebelum memulakan pemasangan:

• 1 x OUKANING Industrial Floor Lamp (Mentol Tidak Termasuk)
• 1 x Kabel Kuasa
• 1 x Lamp teduh
• 1 x Set of Screws and Assembly Hardware
• 1 x Manual Arahan

Imej: Terperinci view daripada lamp components, showing the storage drawer, glass desktop, high-quality iron shade, and the marble material used in the base structure.

3. Persediaan dan Pemasangan

Follow these steps to assemble your OUKANING Industrial Floor Lamp:

1. Buka semua komponen dan letakkannya di atas permukaan yang bersih dan rata.
2. Berhati-hati menyambung lamp poles by screwing them together. Ensure the internal wiring is not pinched during this process.
3. Attach the base to the assembled pole structure using the provided screws and hardware. Tighten securely to ensure stability.
4. Lekapkan lamp shade onto the designated fixture at the top of the lamp lengan.
5. Insert an E26 base bulb (not included) into the lamp soket. Jangan melebihi wat maksimumtage daripada 60W.
6. Letakkan lamp in your desired location, ensuring it is stable and the power cord is not a tripping hazard.

4. Arahan Operasi

Your OUKANING Industrial Floor Lamp is designed for simple operation:

• Hidupkan/Mati Kuasa: Lamp is equipped with a convenient foot pedal switch located on the power cord. Press the pedal once to turn the lamp on, and press it again to turn it off.
• Adjustable Pulley Design: Lamp features an adjustable pulley system. To modify the height or position of the lampshade, gently hold the string and move the lampshade up or down along the boom. Release the string to secure the lampshade in the desired position.

Image: A visual comparison of the lamp in its 'off' state (left) and 'on' state (right), illustrating the illumination provided when active.

5. Penyelenggaraan

Untuk memastikan jangka hayat dan prestasi optimum peranti andaamp:

• Pembersihan: Disconnect from power. Wipe the lamp and shade with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
• Penggantian mentol: Disconnect from power. Allow the old bulb to cool completely before unscrewing it. Insert a new E26 base bulb, ensuring it is securely tightened.
• Penjagaan Kord: Regularly inspect the power cord for any signs of damage. If the cord is damaged, it must be replaced by a qualified professional to avoid hazards.

6. Penyelesaian masalah

If you encounter issues with your OUKANING Industrial Floor Lamp, rujuk kepada masalah dan penyelesaian biasa berikut:

• Lamp tidak dihidupkan:
  • Pastikan kord kuasa dipasang dengan selamat ke dalam salur keluar elektrik yang berfungsi.
  • Check if the bulb is properly installed and not burnt out. Replace if necessary.
  • Verify that the foot pedal switch is fully pressed.
• Kelipan cahaya:
  • Ketatkan mentol dalam soketnya.
  • Cuba mentol yang berbeza untuk menolak kemungkinan mentol rosak.
  • Ensure the electrical connection is stable.
• Lamp is unstable:
  • Check all screw connections, especially at the base, and tighten them if loose.
  • Pastikan lamp diletakkan di atas permukaan yang rata dan rata.

If these steps do not resolve the issue, please contact OUKANING customer support for further assistance.

7. Spesifikasi

Image: A diagram illustrating the key dimensions of the floor lamp, including overall height, shade diameter, and base measurements.

8. Waranti dan Sokongan

For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official OUKANING webtapak.