Mimoke Rotating Bike Wall Mount Instruction Manual

pengenalan

Thank you for choosing the Mimoke Rotating Bike Wall Mount. This product is designed to provide an efficient and space-saving solution for storing your bicycle. It allows you to store your bike vertically against a wall, freeing up floor space in your garage, apartment, or shed. The rotating feature enables you to position your bike at various angles to maximize space utilization.

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Mimoke Rotating Bike Wall Mount. Please read all instructions carefully before installation and retain this manual for future reference.

Maklumat Keselamatan Penting

• Permukaan Pemasangan: Always mount the bike rack to a solid, structural surface such as a concrete wall, brick wall, or a wooden stud/beam. JANGAN install on "cantilevered" wall surfaces like plasterboard or drywall unless there is a strong wooden support behind it. Failure to do so may result in property damage or injury.
• Kapasiti Berat: The Mimoke Rotating Bike Wall Mount is designed to support bikes up to 30 kg (66 lbs). Do not exceed this weight limit.
• Keserasian Basikal: Suitable for bikes with a straight top tube (diameter less than 55mm) and handlebar width up to 500mm (19.7 inches).
• Pemasangan Selamat: Ensure all screws and anchors are securely fastened before hanging a bicycle. Regularly check the mount for any signs of loosening or damage.
• Kanak-kanak dan Haiwan Kesayangan: Keep children and pets away from the installation area and from hanging bikes to prevent accidents.

Kandungan Pakej

Sila sahkan bahawa semua komponen hadir sebelum memulakan pemasangan:

• Mimoke Rotating Bike Wall Mount Unit
• Wall Mounting Hardware (screws, anchors for concrete/masonry/wood)
• Tire Stopper Unit
• Manual Arahan (dokumen ini)

Imej: Meletup view of the Mimoke Rotating Bike Wall Mount showing the main unit and included installation hardware (screws and anchors). The image also indicates compatibility with wood stud framing and solid concrete walls.

Spesifikasi Produk

Image: Detailed technical drawing showing the dimensions of the Mimoke Rotating Bike Wall Mount and the tire stopper.

Persediaan dan Pemasangan

Alat yang Diperlukan: Drill, drill bits appropriate for your wall type (wood/masonry), level, measuring tape, pencil, screwdriver.

1. Pilih Lokasi Pemasangan: Select a solid wall surface (concrete, brick, or wood stud/beam) that can safely support the weight of your bike and the mount. Ensure there is enough clearance for your bike to rotate and for easy access.
2. Tandai Lubang Gerudi: Hold the mount against the wall at the desired height. Use a level to ensure it is straight. Mark the positions for the mounting screws with a pencil.
3. Gerudi Lubang Juruterbang: Drill pilot holes according to the size of the provided anchors/screws. For concrete/masonry, insert the appropriate wall anchors. For wood studs, drill pilot holes slightly smaller than the screw diameter.
4. Pasang Lekap: Align the mount with the drilled holes and secure it firmly to the wall using the provided screws. Ensure it is tightly fastened and does not wobble.
5. Install Tire Stopper: Position the tire stopper on the wall directly below where the bike's rear wheel will rest. This prevents the wheel from moving and protects the wall. Mark and drill holes, then secure the tire stopper.

Image: The tire stopper component, designed to prevent the bike's wheel from contacting the wall and provide stability.

Penting: Before hanging your bike, gently pull on the installed mount to ensure it is securely fixed to the wall and can withstand the bike's weight.

Arahan Operasi

1. Hanging Your Bike:
   • Balance your bike on its rear wheel.
   • Lift the front wheel and guide the bike's top tube onto the hook of the wall mount. The angled hook design facilitates easy placement.
   • Ensure the bike is stable and the rear wheel rests against the installed tire stopper.
2. Rotating Your Bike:
   • Once the bike is securely on the mount, you can rotate the entire assembly to position the bike closer to the wall or at a desired angle. The mount offers an adjustable angle range of +65° to -85°.
   • Gently push or pull the bike to rotate it. The mechanism is designed to hold the bike in the chosen position.
3. Removing Your Bike:
   • Lift the bike slightly to disengage the top tube from the hook.
   • Carefully lower the bike to the ground.

Image: Illustration demonstrating the swivel arm feature, allowing the bike to be rotated and stored flush against the wall to save space.

Imej: Jarak dekat view of the mount highlighting the adjustable angle range of +65° to -85° and the scratch-resistant coating.

Imej: Cthample of multiple bikes stored efficiently using the Mimoke Rotating Bike Wall Mounts, demonstrating space-saving in a garage setting.

Penyelenggaraan

• Pemeriksaan Berkala: Periodically check all mounting screws and the tire stopper for tightness. Ensure the mount is still securely attached to the wall.
• Kebersihan: Lap pelekap dengan iklanamp cloth to remove dust or dirt. Avoid abrasive cleaners that could damage the finish.
• Hook Condition: Inspect the rubber coating on the hook for wear or damage. This coating protects your bike's wheel, rim, and spokes.

Menyelesaikan masalah

• Gunung berasa longgar:

  Ensure all mounting screws are tightened. If the issue persists, the mounting surface may not be adequate. Re-evaluate the wall's structural integrity and consider relocating the mount to a stronger point (e.g., a different stud or a concrete section).

• Bike does not sit flush against the wall:

  Check the handlebar width against the specified maximum (500mm / 19.7 inches). Ensure the tire stopper is correctly positioned to allow the rear wheel to rest against it, and that the mount is rotated to its maximum inward angle.
• Bike slides on the hook:

  Ensure the bike's top tube is properly seated on the hook. The rubber coating on the hook is designed to provide grip. If the coating is worn, contact customer support.

Waranti dan Sokongan

The Mimoke Rotating Bike Wall Mount is backed by a Waranti 10 tahun against manufacturing defects. This warranty covers defects in materials and workmanship under normal use.

For warranty claims, technical support, or any questions regarding your product, please contact Mimoke customer service through the retailer where you purchased the product or visit the official Mimoke webtapak.

Sila simpan bukti pembelian anda untuk tujuan waranti.