HICON Ice Cube Maker Machine

pengenalan

Thank you for choosing the HICON Ice Cube Maker Machine. This portable countertop ice maker is designed to provide you with fresh bullet-shaped ice cubes quickly and efficiently. Please read this manual carefully before operating the appliance to ensure safe and optimal performance. Keep this manual for future reference.

Image: The HICON Ice Cube Maker Machine, showcasing its compact design, an ice scoop, and a glass with ice cubes.

Arahan Keselamatan Penting

• Baca semua arahan sebelum menggunakan perkakas.
• Do not immerse the power cord, plug, or any part of the unit in water or other liquids.
• Pastikan perkakas diletakkan di atas permukaan yang stabil dan rata, jauh daripada cahaya matahari langsung atau sumber haba.
• Allow at least 15 cm of clearance around the unit for proper ventilation.
• Gunakan hanya air yang boleh diminum di dalam tangki air.
• Cabut plag perkakas dari salur keluar kuasa sebelum membersihkan atau apabila tidak digunakan.
• Jangan kendalikan perkakas dengan kord atau palam yang rosak.
• Jauhkan kanak-kanak daripada pembuat ais semasa operasi.
• Do not remove the ice basket while the unit is making ice.

Persediaan

1. Membongkar: Carefully remove the ice maker from its packaging. Remove all packing materials, including any tape or protective film.
2. penempatan: Place the ice maker on a flat, stable, and level surface. Ensure there is adequate ventilation around the unit (at least 15 cm clearance on all sides). Avoid placing it near heat sources or in direct sunlight.
3. Pembersihan Awal: Before first use, clean the interior of the ice maker. Refer to the 'Maintenance' section for detailed cleaning instructions.
4. Sambungan Kuasa: Plug the power cord into a grounded electrical outlet (220V / 50Hz).

Image: The HICON Ice Cube Maker Machine highlighting its portable handle design, indicating no installation is required.

Arahan Operasi

1. Tambah Air: Open the lid and fill the water reservoir with potable water up to the MAX fill line. Do not overfill. The water tank capacity is 1.3 liters.
2. Hidupkan: Press the "ON/OFF" button to start the ice making cycle. The indicator light will illuminate.
3. Pengeluaran Ais: The ice maker will begin producing bullet-shaped ice cubes. The first batch of ice typically takes about 6-9 minutes. Subsequent batches may be faster. The machine can produce up to 33 lbs of ice per day.
4. Penunjuk Penuh Ais: When the ice basket is full, the "ICE FULL" indicator light will turn on, and the ice making process will pause automatically. Remove ice from the basket to resume production.
5. Air Shortage Penunjuk: If the water level in the reservoir is too low, the "ADD WATER" indicator light will turn on. Add more water to resume ice production.
6. Adjusting Ice Size: The ice cube size can be adjusted. Refer to the control panel for specific settings, if available.
7. Matikan: Press the "ON/OFF" button again to stop the ice making process.

Image: A visual guide demonstrating the simple three-step process of using the ice maker: adding water, pressing the power button, and scooping out ice.

Image: The ice maker with graphical representations of its rapid ice-making capabilities and large capacity, including basket size, daily production, and per-cycle output.

Penyelenggaraan

Fungsi Pembersihan Automatik

The HICON Ice Cube Maker features an automatic self-cleaning function:

1. Pastikan takungan air diisi dengan air bersih.
2. Press and hold the "ON/OFF" button for approximately 5 seconds.
3. The machine will enter a cleaning cycle that lasts for about 20 minutes.
4. After the cleaning cycle, drain the water from the unit using the manual drain plug located at the bottom.

Pembersihan Berkala

• Sentiasa cabut plag perkakas sebelum membersihkan.
• Keluarkan bakul ais dan bersihkannya dengan detergen lembut dan air suam. Bilas sehingga bersih.
• Clean the interior of the water reservoir and ice collection area with a soft cloth dampdisalut dengan larutan pembersih yang lembut.
• Lap bahagian luar unit dengan lembut, damp kain. Jangan gunakan pembersih atau pelarut yang melelas.
• Ensure all parts are completely dry before reassembling and storing the unit.

Penyimpanan

When not in use for an extended period, drain all water from the unit, clean it thoroughly, and store it in a dry, well-ventilated area away from direct sunlight.

Image: A close-up of the ice maker's control panel and a diagram illustrating the manual drain plug, emphasizing the one-touch self-cleaning feature.

Menyelesaikan masalah

Spesifikasi

Image: Detailed dimensions of the ice maker and its key components, including the ice scoop, removable ice basket, and water tank capacity.

Waranti dan Sokongan

This product comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your purchase or contact the retailer.

For technical support, troubleshooting assistance, or spare parts, please contact the customer service department of your retailer or the manufacturer. Please have your model number (HZB-16MT / YLY080-SRK01) and purchase details ready when contacting support.