Manual Pengguna Pen 3D Super MYNT3D MP017-3M

1. Pengenalan

Welcome to the MYNT3D Super 3D Pen user manual. This guide provides comprehensive instructions for the safe and effective operation, setup, and maintenance of your MYNT3D Super 3D Pen, model MP017-3M. This device allows you to create three-dimensional objects by extruding heated plastic filament, offering a unique artistic and prototyping experience.

Image 1.1: The MYNT3D Super 3D Pen, its retail box, and an example 3D creation.

2. Maklumat Keselamatan

Please read all safety warnings and instructions carefully before using the MYNT3D Super 3D Pen. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Hot Nozzle: The pen's nozzle and surrounding area become extremely hot during operation (up to 270°C). Do not touch the nozzle with bare hands or any part of your body.
• Bahan mudah terbakar: Keep the pen away from flammable materials, liquids, and gases.
• Pengudaraan: Use the pen in a well-ventilated area. Some filaments may produce fumes when heated.
• Kanak-kanak: This product is not a toy. Adult supervision is required for users under 14 years of age.
• Bekalan Kuasa: Use only the provided power adapter. Do not use damaged power cords or adapters.
• Pendedahan Air: Do not expose the pen to water or operate it with wet hands.
• Cabut plag Apabila Tidak Digunakan: Always unplug the pen when not in use or before cleaning.
• Filament Type: Ensure you are using the correct filament type (ABS or PLA) for the selected temperature setting.

3. Kandungan Pakej

Sahkan bahawa semua item yang disenaraikan di bawah disertakan dalam pakej anda:

• MYNT3D Super 3D Pen (MP017-3M)
• Power Adapter (100-240V AC 50/60Hz, Output: 5V/DC 2A)
• ABS Filament Refill Pack (10 colors, 3 meters each)
• Manual Pengguna (dokumen ini)

Image 3.1: The included 10-color ABS filament refill pack.

4. Produk Lebihview

Familiarize yourself with the components and controls of your MYNT3D Super 3D Pen.

Image 4.1: The MYNT3D Super 3D Pen. Note the power input, filament loading port, and extrusion nozzle.

Komponen Utama:

• muncung: The hot tip where melted filament exits.
• Filament Loading Port: Where filament is inserted into the pen.
• Pelabuhan Kuasa: Connects the pen to the power adapter.
• Extrusion Speed Control: Stepless variable control to adjust filament flow rate.
• Pelarasan Suhu: Buttons or dial to select between ABS and PLA temperature settings.
• Lampu Penunjuk Status: Indicate power, heating status, and readiness.

5. Persediaan

1. Sambungkan Kuasa: Insert the power adapter cable into the power port on the pen. Plug the adapter into a standard electrical outlet.
2. Hidupkan kuasa: The pen will typically power on automatically when connected. The status indicator light will illuminate.
3. Pilih Jenis Filamen: Use the temperature adjustment controls to select either ABS or PLA mode, depending on the filament you intend to use.
4. Panaskan: The pen will begin to preheat to the selected temperature. The indicator light will change (e.g., from red to green) when the pen is ready for use. This usually takes 30-60 seconds.

6. Arahan Operasi

6.1 Filamen Pemuatan

1. Ensure the pen is preheated and ready (indicator light is green).
2. Straighten the end of the filament you wish to load.
3. Insert the straightened end of the filament into the filament loading port.
4. Gently push the filament until the pen's internal motor catches it and begins to feed it automatically. Do not force the filament.
5. Wait a few seconds for the filament to melt and extrude from the nozzle.

6.2 Adjusting Extrusion Speed

The MYNT3D Super 3D Pen features a stepless variable extrusion speed control. Rotate the speed control dial to increase or decrease the flow rate of the filament. Experiment with different speeds to find the optimal setting for your project and drawing style.

6.3 Creating 3D Art

Once filament is extruding, you can begin drawing.

• Start by drawing on a flat, heat-resistant surface.
• Move the pen steadily to create lines and shapes.
• To build vertically, draw a base layer and then draw upwards, allowing each layer to cool slightly before adding the next.
• For best results, maintain a consistent distance between the nozzle and your drawing surface.

Image 6.3.1: Using the 3D pen to trace a design, a common starting point for 3D creations.

Imej 6.3.2: Bekasample of a 3D structure being created with the pen, demonstrating vertical building.

6.4 Unloading Filament

1. Press the filament unload button (refer to your pen's specific button layout if not clearly marked).
2. The pen's motor will reverse, pushing the filament out of the loading port.
3. Once the filament is fully extracted, remove it from the pen.
4. It is recommended to unload filament after each use to prevent clogs, especially if changing filament types or colors.

7. Penyelenggaraan

• Membersihkan muncung: If the nozzle becomes clogged or has excess plastic, ensure the pen is unplugged and cooled. Carefully remove any hardened plastic with a small tool. Do not use abrasive materials.
• Storan: Store the pen in a dry, cool place away from direct sunlight. Unload filament before long-term storage.
• Penyimpanan Filamen: Keep filament in a sealed bag or container to prevent moisture absorption, which can affect printing quality.

8. Penyelesaian masalah

9. Spesifikasi

Image 9.1: Filament specifications as shown on the refill pack. Note the recommended temperature range for ABS.

10. Waranti dan Sokongan

For warranty information, technical support, or assistance with your MYNT3D Super 3D Pen, please visit the official MYNT3D website or contact their customer service department. Details can typically be found on the product packaging or the brand's online store.

You can visit the MYNT3D Store for more information: MYNT3D Official Store