pengenalan
This manual provides essential information for the safe and efficient operation of your Antari Z-1500III 1500W Fog Machine. Please read these instructions thoroughly before operating the device to ensure proper usage and to prevent damage or injury. Keep this manual for future reference.
Maklumat Keselamatan
AMARAN: Kegagalan mematuhi arahan keselamatan ini boleh mengakibatkan kebakaran, kejutan elektrik, kecederaan atau kerosakan pada produk atau harta benda.
- Sentiasa sambungkan unit ke litar yang dibumikan untuk mengelakkan risiko renjatan elektrik.
- Pastikan bekalan kuasa voltage sepadan dengan voltage dinyatakan pada unit.
- Jangan kendalikan unit ini jika kord kuasa rosak.
- Use only Antari-approved fog fluid. Using other fluids may damage the unit or create a fire hazard.
- Jauhkan unit dari bahan mudah terbakar.
- Do not touch the nozzle during operation, as it becomes very hot.
- Pastikan pengudaraan yang mencukupi di sekeliling unit.
- Jangan sekat bukaan pengudaraan.
- Jauhkan daripada kanak-kanak.
- Putuskan sambungan daripada kuasa sebelum membersihkan atau menservis.
Produk Selesaiview
The Antari Z-1500III is a high-performance 1500W fog machine designed for professional applications. It features an LCD display, two rotary knobs for control, and an auto liquid detector to prevent dry running. The robust casing design ensures durability.
Rajah 1: Bahagian hadapan view of the Antari Z-1500III Fog Machine, showing the main body and fluid reservoir.
Rajah 2: Sisi view of the Antari Z-1500III Fog Machine, highlighting its compact design and ventilation grilles.
Persediaan
- Membongkar: Carefully remove the fog machine from its packaging. Inspect for any shipping damage.
- penempatan: Place the unit on a flat, stable, non-flammable surface. Ensure there is at least 20 cm (8 inches) of space around the unit for proper ventilation.
- Fill Fluid Reservoir: Unscrew the cap of the fluid reservoir and carefully pour Antari-approved fog fluid into the tank. Do not overfill. Securely replace the cap. The unit features a built-in auto liquid detector.
- Sambungan Kuasa: Connect the power cord to the power input on the rear of the unit, then plug it into a grounded electrical outlet.
Rajah 3: Belakang view of the Antari Z-1500III, showing the LCD display, control knobs, and fluid reservoir connection.
Figure 4: Close-up of the power input and main power switch on the Antari Z-1500III.
Arahan Operasi
- Hidupkan kuasa: Flip the main power switch to the "ON" position. The LCD display will illuminate.
- memanaskan badan: The unit will begin its warm-up cycle. This typically takes a few minutes. The LCD display will indicate when the unit is ready for operation.
- Laraskan Tetapan: Use the rotary knobs on the control panel to adjust settings such as timer, volume, and interval, as displayed on the LCD. Refer to the on-screen menu for specific options.
- Keluaran Kabus: Once warmed up, press the fog button (if available, or activate via remote/DMX if connected) to produce fog.
- Auto Liquid Detector: The built-in auto liquid detector will monitor fluid levels. If the fluid runs low, the unit may pause operation or display a warning to prevent damage. Refill the reservoir promptly.
- Matikan: When finished, turn the main power switch to "OFF" and disconnect the power cord.
Figure 5: The Antari Z-1500III Fog Machine in operation, emitting a dense fog effect.
Penyelenggaraan
- Pembersihan: Regularly clean the exterior of the unit with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Fluid System Flush: To ensure longevity and optimal performance, it is recommended to run a cleaning solution (e.g., distilled water or a specialized fog machine cleaner) through the system periodically, especially if the machine will be stored for an extended period.
- Storan: Store the unit in a cool, dry place. Ensure the fluid reservoir is either empty or securely sealed to prevent leaks.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Tiada keluaran kabus | Not warmed up; no fluid; clogged nozzle; pump issue. | Wait for warm-up; check fluid level; clean nozzle; contact support. |
| Unit tidak dihidupkan | No power; faulty power cord; internal fuse. | Check power connection/outlet; inspect cord; contact support. |
| Keluaran kabus rendah | Low fluid; partially clogged nozzle; incorrect fluid type. | Refill fluid; clean nozzle; use Antari-approved fluid. |
Spesifikasi
- model: Z-1500III
- Kuasa: 1500W
- Berat Barang: 32 paun
- Dimensi Pakej: 20 x 13 x 12 inci
- Kawalan: LCD display with 2 rotary knobs
- ciri-ciri: Built-in auto liquid detector, increased output volume
Waranti dan Sokongan
For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Antari webtapak. Simpan bukti pembelian anda untuk tuntutan waranti.
Hubungi: For service or questions, please contact your authorized Antari dealer or distributor.