Parkside PTHSA 20-Li C4

PARKSIDE® Cordless Telescopic Hedge Trimmer

Model: PTHSA 20-Li C4

Jenama: Parkside

pengenalan

Thank you for choosing the PARKSIDE® Cordless Telescopic Hedge Trimmer. This manual provides essential information for the safe operation, maintenance, and care of your new tool. Please read it thoroughly before first use and keep it for future reference.

PARKSIDE® Cordless Telescopic Hedge Trimmer with battery and charger

An image showing the PARKSIDE® Cordless Telescopic Hedge Trimmer fully extended, with its long blade, adjustable pole, and ergonomic handle. The included 20V battery and charger are also visible in the foreground.

Persediaan

Membongkar dan Kandungan

Buka bungkusan semua komponen dengan berhati-hati dan semak kesempurnaan. Pakej itu hendaklah mengandungi:

  • PARKSIDE® Cordless Telescopic Hedge Trimmer
  • Tali bahu
  • Pengawal pisau
  • Kunci Hex
  • 20V (2 Ah) Battery (included)
  • Charger (included)

Pengecasan Bateri

Before first use, fully charge the 20V battery using the supplied charger. Refer to the charger's instruction manual for specific charging procedures and indicators. Ensure the battery is securely seated in the charger during the charging process.

Perhimpunan

  1. Attach the Blade Guard: Secure the blade guard to the cutting blade as instructed in the diagram (refer to product packaging for visual guidance).
  2. Adjust Telescopic Pole: The aluminum telescopic pole can be extended by 70 cm using the quick-release mechanism. Adjust to the desired length for comfortable and safe operation.
  3. Pasang Tali Bahu: Connect the shoulder strap to the designated attachment point on the tool. Adjust the strap length for balanced weight distribution and reduced fatigue during use.

Beroperasi

Langkah-langkah Keselamatan

  • Sentiasa pakai peralatan pelindung diri (PPE) yang sesuai, termasuk cermin mata keselamatan, sarung tangan dan kasut yang kukuh.
  • Pastikan kawasan kerja bersih daripada halangan dan orang ramai.
  • Do not operate the tool in wet conditions or near electrical lines.
  • Always hold the tool firmly with both hands using the ergonomic soft-coated grip.
  • Utilize the safety switch to prevent accidental activation.

Menggunakan Trimmer Hedge

  1. Masukkan Bateri: Ensure the charged 20V battery is securely inserted into the tool's battery compartment.
  2. Adjust Cutting Angle: The cutting head can be adjusted to 11 different angles, ranging from -60° to 90°. This allows for versatile trimming, including high hedges, ground cover, and hard-to-reach areas. Use the angle adjustment mechanism to set the desired position.
  3. Extend Telescopic Pole: Extend the telescopic pole to achieve the required working height, up to approximately 4 meters. Secure the quick-release clamp selepas penyesuaian.
  4. Mulakan Alat: Engage the safety switch and press the power trigger to start the hedge trimmer.
  5. pemangkasan: Move the hedge trimmer smoothly along the hedge, allowing the laser-cut blade to cut through branches. The maximum branch diameter for cutting is 12 mm.
  6. Hentikan Alat: Release the power trigger to stop the tool. Always remove the battery when not in use or before performing any maintenance.

Penyelenggaraan

Penjagaan Blade

  • After each use, clean the cutting blades thoroughly to remove sap, leaves, and debris. Use a stiff brush and a suitable cleaning agent.
  • Regularly lubricate the blades with a light machine oil or specialized blade lubricant to ensure smooth operation and prevent rust.
  • Inspect the blades for any damage or dullness. Sharpen or replace blades as necessary by a qualified technician.

Penyelenggaraan Am

  • Keep the tool clean and free from dust and dirt. Wipe down the housing with a damp kain.
  • Check all screws and fasteners regularly and tighten them if loose.
  • Store the hedge trimmer in a dry, secure place, out of reach of children, with the blade guard in place.
  • Simpan bateri di tempat yang sejuk dan kering, jauh dari cahaya matahari langsung dan suhu yang melampau.

Menyelesaikan masalah

MasalahKemungkinan PuncaPenyelesaian
Alat tidak bermulaBattery not charged or not inserted correctlyCharge the battery fully; ensure battery is securely clicked into place.
Mengurangkan prestasi pemotonganBlades are dull or dirty; branches are too thickClean and lubricate blades; sharpen or replace blades if necessary. Do not attempt to cut branches exceeding 12 mm diameter.
Alat berhenti semasa operasiBattery is depleted; motor overloadRecharge the battery. Reduce load on the motor by cutting smaller sections.

Spesifikasi

CiriSpesifikasi
Nombor ModelPTHSA 20-Li C4
Kelajuan Berperingkat2,300 rpm
Bateri yang disyorkan20 V (2 Ah)
Max. Tooth Spacing15 mm
Maks. Diameter Cawangan12 mm
Panjang Memotonglebih kurang 41 sm
Reachable Working Heightup to approx. 4 m
Dimensi Produk (L x W x H)127 x 15 x 24 cm
Berat badan3.3 kg
bahanaluminium
Sumber KuasaBateri dikendalikan
warnahijau

Waranti dan Sokongan

For warranty information, please refer to the documentation provided with your purchase or contact the retailer. For technical support or spare parts, please contact Parkside customer service. Keep your proof of purchase for any warranty claims.

© 2024 Parkside. Hak cipta terpelihara.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.