EVERSTEIN M6612BI-10BL Shower System with Tub Spout User Manual

1. Maklumat Keselamatan Penting

Please read all instructions carefully before installation and use. Failure to follow these instructions may result in personal injury or property damage. Retain this manual for future reference.

• Sentiasa matikan bekalan air utama sebelum memulakan sebarang kerja paip.
• Pakai peralatan pelindung diri yang sesuai, termasuk cermin mata keselamatan dan sarung tangan.
• Pastikan semua sambungan selamat dan kedap air untuk mengelakkan kebocoran.
• Jika anda tidak pasti tentang mana-mana bahagian proses pemasangan, berunding dengan tukang paip yang berkelayakan.
• Adhere to all local plumbing and building codes.
• Do not use abrasive cleaners or harsh chemicals on the finish, as this may cause damage.

2. Komponen Produk

Sahkan bahawa semua komponen ada dan tidak rosak sebelum meneruskan pemasangan.

Gambar 2.1: Lebihview of the EVERSTEIN M6612BI-10BL Shower System components, including the 10-inch rain shower head, handheld sprayer, tub spout, and control valve.

• 10-inch Round Rainfall Shower Head
• Handheld Sprayer with 59-inch Stretchable Metal Hose
• Tabung Tiub
• Pressure-Balanced Mixer Valve Body
• Pancuran lengan
• Handheld Shower Holder
• Mounting Hardware (screws, anchors, gaskets)
• Manual Arahan

Figure 2.2: Detailed dimensions of the shower head, shower arm, control trim, handheld shower, and tub spout.

3. Spesifikasi

4. Arahan Pemasangan

Before starting, ensure the main water supply is turned off. This manual provides general guidance; professional installation is recommended.

4.1. Panduan Video Pemasangan

4.2. Valve & Trim Installation

1. Sediakan Dinding: Ensure the wall framing is ready for the valve body. The valve should be positioned at a height of 43 5/8" - 51 3/16" (1100-1300mm) from the floor for the main control.
2. Sambung Talian Air: Connect the hot water inlet (left) and cold water inlet (right) to the valve body. The rainfall shower outlet is at the top, handheld shower outlet on the right, and tub spout outlet at the bottom. Standard connections are 1/2-14 NPT for USA/Canada and G1/2" for Europe.
3. Flush Pipes: Before connecting to the valve, flush the inlet pipes for at least two minutes to remove any debris and prevent blockage.
4. Badan Injap Selamat: Mount the valve body securely to the wall framing. Ensure the built-in lever is properly balanced. Make marks for drilling anchors.
5. Ujian Tekanan: After connecting all pipes, perform a pressure test. Flush the outlet pipes for one minute to check for appropriate water pressure.
6. Ujian Kebocoran: Insert plugs for a water test. Ensure there is no leakage at any joint.
7. Pemasangan Jubin: When cutting tiles, ensure the size of the cut does not exceed the dimensions of the trim. The embedded box should be cut flush with the tile surface.
8. Install Trim: Remove the plastic protective case from the valve. Install the decorative trim plate and secure it.

Figure 4.1: Diagram illustrating the recommended pipe replacement and connections for the rainfall shower, handheld shower, and tub spout.

Rajah 4.2: Terperinci view of the pressure balancing valve, showing hot water inlet, cold water inlet, rainfall shower outlet, handheld shower outlet, tub spout outlet, brass body, and ceramic valve core.

4.3. Rainfall Shower Installation

1. Sediakan Lengan Pancuran: Ensure the distance from the tiled surface to the brass fitting is 7/8" (22mm). Wrap Teflon tape around the threads of the shower arm for at least 12 turns to prevent leaks.
2. Pasang Lengan Pancuran: Install the cover to the shower arm, then screw the shower arm clockwise into the wall fitting until secure.
3. Pasang Kepala Pancuran: Insert a gasket into the shower head connection. Connect the 10-inch rainfall shower head to the shower arm.

Figure 4.3: The wall-mounted shower arm, ready for installation.

4.4. Handheld Shower Installation

1. Sediakan Pemegang: Ensure the distance from the tiled surface to the brass fitting is 3/4" (20mm). Use an Allen key to remove the brass piece from the handheld shower holder by turning it counterclockwise.
2. Install Brass Fitting: Wrap Teflon tape around the brass fitting for at least 12 turns. Mount the brass fitting into the wall.
3. Pemegang Lampirkan: Use the Allen key to turn clockwise and connect the shower bracket to the brass parts.
4. Connect Hose and Sprayer: Insert a gasket into the hose connection. Connect the 59-inch metal hose to the handheld shower holder and then to the handheld sprayer.

Figure 4.4: The stainless steel handheld shower, ready for connection.

Figure 4.5: The 59-inch stretchable metal hose for the handheld shower.

4.5. Tub Spout Installation

1. Prepare Spout: Ensure the distance from the tiled surface to the brass fitting is 7/8" (21mm). Wrap Teflon tape around the threads of the tub spout for at least 12 turns to prevent leaks.
2. Pasang Spout: Install the cover to the tub spout, then screw the tub spout clockwise into the wall fitting until secure.

Figure 4.6: The brass tub spout, designed for efficient water flow.

5. Arahan Operasi

The EVERSTEIN M6612BI-10BL shower system features a single handle for temperature control and a diverter for selecting water outlets.

Figure 5.1: The shower mixer valve control, showing the main handle for temperature and flow, and the diverter knob for selecting shower functions.

• Kawalan Suhu: The main handle controls both water flow and temperature. Rotate the handle counter-clockwise for hot water and clockwise for cold water. Push the handle in or pull it out to adjust water flow.
• Fungsi Pengalih: The smaller knob above the main handle is the diverter.
  • Turn to the top position to activate the rainfall shower head.
  • Turn to the middle position to activate the handheld sprayer.
  • Turn to the bottom position to activate the tub spout.
• Pressure-Balanced Valve: The integrated pressure-balanced valve maintains a consistent water temperature, preventing sudden changes due to fluctuations in hot or cold water pressure.

6. Penyelenggaraan

Pembersihan dan penyelenggaraan yang kerap akan memastikan jangka hayat dan prestasi optimum sistem pancuran mandian anda.

• Membersihkan Kemasan: Bersihkan kemasan hitam matte dengan lembut, damp kain dan sabun lembut. Elakkan pembersih yang melelas, bahan kimia yang keras, atau pad penyental, kerana ini boleh merosakkan kemasan. Bilas dengan teliti dan keringkan dengan kain lembut untuk mengelakkan bintik air.
• Cleaning Shower Head Nozzles: The silicone nozzles on the rainfall shower head and handheld sprayer are designed for easy cleaning. Simply rub the nozzles with your finger or a soft brush to dislodge any mineral deposits (calcium buildup). This helps maintain consistent water flow.
• Semak Kebocoran: Periodically inspect all connections for any signs of leakage. Tighten connections if necessary, but do not overtighten.

7. Penyelesaian masalah

Rujuk jadual berikut untuk isu lazim dan potensi penyelesaiannya.

8. Waranti dan Sokongan

The EVERSTEIN M6612BI-10BL Shower System is backed by a Waranti Seumur Hidup, which includes free parts replacement.

For technical support, warranty claims, or any questions regarding your product, please contact EVERSTEIN customer service. Our technical support team is available 24/7 to assist you.

Maklumat Hubungan: Please refer to the contact details provided on the EVERSTEIN official website or your purchase documentation for the most up-to-date support information.

Anda juga boleh melawat EVERSTEIN Store on Amazon untuk mendapatkan lebih banyak maklumat produk dan sumber sokongan.