pengenalan
Thank you for choosing the Lenercom 1500A 12V Car Jump Starter with 150 PSI Tire Inflator. This versatile device combines four essential functions: a powerful car jump starter, a portable tire inflator, a 12000mAh power bank, and an emergency LED flashlight. This manual provides detailed instructions for safe and effective use, maintenance, and troubleshooting.
Image: The Lenercom 4-in-1 device highlighting its functions as a jump starter, air compressor, power bank, and LED light.
Maklumat Keselamatan Penting
Sila baca semua amaran dan arahan keselamatan sebelum menggunakan produk ini. Kegagalan mematuhi arahan ini boleh mengakibatkan renjatan elektrik, kebakaran dan/atau kecederaan serius.
- Do not connect the jump starter to a vehicle battery with a voltage lebih tinggi daripada 12V.
- Ensure the jump starter has more than 30% power before attempting to jump-start a vehicle.
- Jangan biarkan cl positif dan negatifamps untuk menyentuh antara satu sama lain.
- Jauhkan peranti daripada kanak-kanak.
- Store in a cool, dry place, away from direct sunlight and high temperatures.
- Gunakan hanya kabel dan aksesori yang disediakan.
- Jangan buka atau ubah suai peranti.
Image: The Lenercom jump starter highlighting its intelligent chip protection and robust design for extreme environments.
Produk Selesaiview
The Lenercom PM4-12 includes the following components:
- Lenercom 1500A Jump Starter Unit
- Smart Jumper Cables (with clamps)
- Kabel Pengecas USB
- Air Hose for Tire Inflator
- 3 x Air Nozzles (for various inflatables)
- Beg Simpanan
- Manual Pengguna
Persediaan
Pengecasan Awal
Before first use, or after a long period of non-use, fully charge the jump starter. Use a 5V/2A USB adapter (not included) with the provided USB cable. The LCD screen will display the battery level. A full charge ensures optimal performance and extends battery life.
To prolong battery life, discharge and recharge the unit completely every 3 months.
Arahan Operasi
1. Lompat Memulakan Kenderaan
- Pastikan jump starter mempunyai cas sekurang-kurangnya 30%.
- Sambungkan cl merah (+).amp ke terminal positif (+) bateri kenderaan.
- Sambungkan cl hitam (-).amp ke terminal negatif (-) bateri kenderaan.
- Plug the smart jumper cable connector into the jump starter's port. The indicator light on the smart cable will turn green.
- Hidupkan enjin kenderaan.
- Once the engine starts, immediately remove the smart jumper cable from the jump starter, then disconnect the black (-) clamp, diikuti oleh merah (+) clamp daripada bateri kenderaan.
The Lenercom 1500A can jump-start vehicles with up to 7L gas or 4L diesel engines.
Image: The Lenercom jump starter connected to a car battery using the red and black clamps, ready to jump-start the vehicle.
2. Menggunakan Inflator Tayar
- Screw the air hose onto the tire valve stem.
- Connect the other end of the air hose to the inflator port on the jump starter.
- Skrin LCD akan memaparkan tekanan tayar semasa.
- Use the '+' and '-' buttons to set the desired pressure. You can switch between units (PSI, Bar, Kpa, kg/cm²) using the unit button.
- Press the power button to start inflation. The inflator will automatically stop once the preset pressure is reached.
The 150 PSI air compressor can inflate car tires (195/65/R15 from 0 to 35 PSI in approximately 6 minutes), bicycles, balls, and other inflatables using the included nozzles.
Image: The Lenercom portable air compressor connected to a car tire, displaying pressure readings on its digital screen.
3. Menggunakan sebagai Power Bank
The Lenercom jump starter features a 12000mAh battery capacity with QC3.0 fast charging output and two USB ports. This allows you to charge mobile phones, tablets, and other USB-powered devices.
- Connect your device to one of the USB output ports using a compatible USB cable.
- Pemula lompat akan mula mengecas peranti anda secara automatik.
Image: The Lenercom device connected via USB cable, charging a smartphone, demonstrating its power bank functionality.
4. Menggunakan Lampu LED
The integrated LED light offers three modes for various situations:
- Mod Lampu Suluh: Press and hold the light button to turn on the flashlight.
- Mod Strob: Press the light button again to switch to strobe mode.
- Mod SOS: Press the light button a third time for SOS signaling.
- Tekan dan tahan butang lampu untuk mematikan lampu LED.
Image: The Lenercom device with its LED light illuminated, demonstrating its use as a flashlight.
Penyelenggaraan
- mengecas: To maintain battery health, fully discharge and recharge the unit every three months, even if not in use.
- Pembersihan: Lap peranti dengan kain lembut dan kering. Jangan gunakan bahan kimia yang keras atau bahan yang melelas.
- Storan: Store the jump starter in a cool, dry place between -4°F to 140°F (-20°C to 60°C). Keep it away from moisture and direct sunlight.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Vehicle does not start after jump-starting attempt. | Jump starter battery too low; incorrect clamp connection; vehicle battery completely dead. | Ensure jump starter has >30% charge. Check clamp polarity and secure connection. If vehicle battery is completely dead, it may not activate the jump starter's safety features. Consult a professional. |
| Tire inflator not working or inaccurate. | Air hose not securely connected; incorrect pressure setting; jump starter battery low. | Ensure air hose is tightly screwed onto valve and inflator port. Verify desired pressure setting. Charge the jump starter. |
| Peranti tidak mengecas atau mengecas perlahan. | Faulty USB cable or adapter; jump starter battery full. | Use the provided USB cable and a 5V/2A adapter. Try a different cable or adapter. The device will stop charging once full. |
| Lampu LED tidak menyala. | Jump starter battery low; button not pressed correctly. | Charge the jump starter. Press and hold the light button for a few seconds to activate. |
Spesifikasi
| Ciri | Spesifikasi |
|---|---|
| Model | PM4-12 |
| Arus Puncak | 1500A |
| Voltage | 12V |
| Kapasiti Bateri | 12000mAh (Lithium-polymer) |
| Tekanan Pemampat Udara | Sehingga 150 PSI |
| Output USB | QC3.0 & Standard USB |
| Suhu Operasi | -4°F hingga 140°F (-20°C hingga 60°C) |
| Dimensi (L x W x H) | 16.5 x 10 x 4.5 cm (6.5 x 3.9 x 1.8 inci) |
| Berat badan | 1 kg (2.2 lbs) |
Waranti dan Sokongan
Lenercom products are designed for reliability and performance. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Lenercom website. If you encounter any issues or have questions regarding your device, do not hesitate to contact our customer service team for assistance.