UMLIFE Ultra-mini USB Type C 3.7V Lithium Battery Charger Board Instruction Manual

Produk Selesaiview

The UMLIFE Ultra-mini USB Type C Lithium Battery Charger Board is designed for charging 3.7V lithium batteries. It features a compact design, a Type-C USB input for power supply, and integrated protection circuits to ensure safe charging. This module is compatible with most PD fast charging heads and provides a 1A linear charging current.

Ciri-ciri utama termasuk:

• Ultra-small form factor for integration into various projects.
• USB Type-C input for convenient power connection.
• 1A high current linear charging for 3.7V lithium batteries.
• Integrated protection circuit for over-voltage, pelepasan lampau dan perlindungan arus lampau.
• LED indicators for charge status.

Imej: Bersudut view of the UMLIFE Ultra-mini USB Type C Lithium Battery Charger Board. This image highlights the compact size and the Type-C USB input port, along with the various electronic components on the board.

Arahan Persediaan

Follow these steps to set up your UMLIFE charger board:

1. Kenal pasti Titik Sambungan: Locate the IN+, IN-, B+, B-, OUT+, and OUT- pads on the charger board.
   

   Imej: Atas ke bawah view of the charger board. This image clearly shows the input (IN+, IN-), battery (B+, B-), and output (OUT+, OUT-) connection points, which are crucial for proper wiring.
2. Sambungkan Bateri: Connect your 3.7V lithium battery to the B+ and B- pads. Ensure correct polarity: B+ to the positive terminal of the battery, and B- to the negative terminal.
3. Sambungkan Beban (Pilihan): If you intend to power a device directly from the charger board while charging, connect your load to the OUT+ and OUT- pads. Note that the "Battery+" and "Output+" terminals are electrically bonded together. The "Output-" and "Battery-" terminals are electrically isolated.
4. Sambungkan Bekalan Kuasa: Insert a USB Type-C cable into the board's Type-C port. Connect the other end of the cable to a 5V to 6V USB power source, such as a mobile phone charger or a compatible PD fast charging head.
5. Activate Protection Board: For the first use, it is necessary to connect the power supply to activate the integrated protection board.

Arahan Operasi

Once connected, the charger board will begin charging the lithium battery. Observe the LED indicators for charge status:

• Penunjuk Pengecasan: A red LED typically indicates that the battery is currently charging.
• Charged Indicator: A green or blue LED typically indicates that the battery is fully charged.

Charging Cycle Behavior:

• The charging cycle automatically terminates when the charging current drops to 100mA after reaching the final float voltage (4.2V).
• Jika bateri voltage drops below 4.05V (approximately 80% to 90% of capacity), the charging cycle will automatically restart.
• For batteries with voltage below 2.9V, the board initiates a pre-charge phase with a current of 100mA.

Ciri-ciri perlindungan:

The board includes an integrated protection circuit to safeguard the battery and the module:

• Lebih-voltage Perlindungan: Menghalang bateri daripada dicas melebihi volum selamatnyataghad.
• Perlindungan lebihan pelepasan: Prevents the battery from discharging below 2.4V, extending battery life.
• Perlindungan lebihan semasa: Limits the output current to 4A to prevent damage from excessive load.

Penyelenggaraan

To ensure the longevity and proper functioning of your charger board:

• Pastikan papan bersih dan bebas daripada habuk dan serpihan.
• Avoid exposing the board to moisture or extreme temperatures.
• Pastikan semua sambungan selamat dan terlindung dengan betul untuk mengelakkan litar pintas.
• Jangan melebihi vol input yang ditentukantage range (5V-6V) or output current (1A charging, 4A protection limit).

Menyelesaikan masalah

Spesifikasi Teknikal

Image: Dimensions of the charger board. This image provides a visual reference for the physical size of the module, indicating its length and width.

Imej: Bawah view of the charger board. This view confirms the key electrical specifications printed on the board itself, specifically the 4.2V output voltage and 1A charging current.

Maklumat Waranti

UMLIFE products are manufactured to high-quality standards. For specific warranty details, please refer to the purchase documentation or contact the seller directly. General return policies typically allow for returns or replacements within 30 days of purchase for defective items.

Sokongan Pelanggan

For technical assistance, questions, or support regarding your UMLIFE Ultra-mini USB Type C Lithium Battery Charger Board, please contact the manufacturer or seller through the platform where the product was purchased.

You can also visit the official UMLIFE Store for more information: UMLIFE Store on Amazon