SunsGrove Twin XL Adjustable Bed Frame User Manual

Maklumat Keselamatan Penting

Sila baca semua arahan dengan teliti sebelum pemasangan dan penggunaan. Simpan manual ini untuk rujukan masa hadapan.

• Kapasiti Berat: Jangan melebihi kapasiti berat maksimum bagi 700 paun. Exceeding this limit may cause damage to the frame and potential injury.
• Perhimpunan: Adult assembly is required. Ensure all parts are correctly installed and tightened before use.
• Bahagian bergerak: Be cautious of sharp edges and moving parts during assembly and operation. Keep hands and feet clear of moving mechanisms.
• Kanak-kanak dan Haiwan Kesayangan: Keep children and pets away from the adjustable bed frame during operation to prevent injury.
• Kord Kuasa: Ensure the power cord is not pinched or damaged. Do not operate the bed frame with a damaged cord or plug.
• Keserasian Tilam: This frame is designed for use with 10-14 inch thick memory foam or hybrid mattresses. Using incompatible mattresses may affect performance.

Produk Selesaiview

The SunsGrove Twin XL Adjustable Bed Frame provides customizable comfort with independent head and foot incline, a wired remote control, and adjustable leg height options. It is constructed from sturdy steel for durability and features quiet dual motors.

Figure 1: SunsGrove Twin XL Adjustable Bed Frame in its fully extended and inclined positions.

Ciri-ciri Utama:

• Independent Head and Foot Incline: Head adjusts from 0 to 64 degrees, foot adjusts from 0 to 35 degrees.
• Alat Kawalan Jauh Berwayar: Easy to use and always accessible.
• Adjustable Leg Height: Two height options (7 inches or 12 inches) for customized bed height.
• Pembinaan Tahan Lama: Sturdy steel frame with a black finish, reinforced with metal screws.
• Reliable Dual Motors: ETL certified, quiet, and designed for long-term durability (20,000 fatigue tests).
• Mattress Retainer Bar: Keeps the mattress securely in place.

Persediaan dan Perhimpunan

The SunsGrove adjustable bed frame is designed for easy assembly and comes smartly packaged in one carton. Assembly typically takes about 30 minutes.

Sebelum Anda Bermula:

• Unpack all components and verify against the parts list (not provided in this manual, refer to included physical manual).
• Pastikan anda mempunyai ruang kosong yang cukup untuk pemasangan.
• Have a second person available for assistance, if needed, especially when lifting or positioning the frame.

Langkah Perhimpunan:

1. Buka Bingkai: Carefully unfold the bed frame sections. The frame is composed of two main sections.
2. Pasang Kaki: Screw the adjustable legs into the designated points on the frame. You can choose between 7-inch or 12-inch height options by adjusting the leg sections.
   

   Figure 2: Adjustable leg height options (7" or 12").

3. Connect the Motors and Wiring: Connect the motor cables to the control box and the control box to the power adapter. Ensure all connections are secure.
4. Pasang Bar Penahan Tilam: Attach the mattress retainer bar bracket at the foot of the bed frame. This bar prevents the mattress from sliding off when the bed is inclined.
5. Tempat tilam: Carefully place your compatible memory foam or hybrid mattress (10-14 inches thick) onto the assembled frame.
6. Sambung ke Kuasa: Palamkan penyesuai kuasa ke dalam salur keluar elektrik yang dibumikan.

Each part is numbered, and a clear manual is included in the carton for detailed step-by-step instructions.

Arahan Operasi

The adjustable bed frame is operated using the wired remote control.

Wired Remote Control Functions:

Figure 3: Wired remote control layout and maximum incline angles.

• Kawalan Kepala: Use the dedicated buttons to raise or lower the head section of the bed. The head incline ranges from 0 to 64 degrees.
• Kawalan Kaki: Use the dedicated buttons to raise or lower the foot section of the bed. The foot incline ranges from 0 to 35 degrees.
• Head and Foot Control: Some buttons may allow simultaneous adjustment of both head and foot sections.
• Kedudukan rata: A dedicated button may be available to return the bed to a completely flat position.

The wired remote is designed to be easily accessible and can be hung over the edge of the bed.

Penyelenggaraan dan Penjagaan

Proper maintenance ensures the longevity and optimal performance of your SunsGrove adjustable bed frame.

• Pembersihan: Lap bingkai logam dengan iklanamp cloth and mild detergent. Avoid abrasive cleaners or solvents. Ensure the frame is dry before use.
• Penjagaan Motor: The motors are designed to be maintenance-free. Do not attempt to open or lubricate the motor housing.
  

  Figure 4: The ETL certified dual motors are designed for durability and quiet operation.

• Pengurusan Kabel: Periodically check all cables and connections to ensure they are secure and not pinched or frayed.
• Pengagihan Berat: Agihkan berat secara merata pada rangka katil. Elakkan menumpukan beban berat di kawasan kecil.
• Penempatan semula: If moving the bed frame, ensure it is in a flat position and unplugged. Lift the frame carefully, avoiding dragging, to prevent damage to legs or motors.

Menyelesaikan masalah

If you encounter issues with your adjustable bed frame, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact SunsGrove customer support.

Spesifikasi

Ciri	Perincian
Nombor Model	ABB-WIRED-2302
Saiz	Kembar XL
Dimensi Produk (L x W x H)	78.9" x 37" x 14.17" (200cm x 94cm x 36cm) Figure 5: Detailed dimensions of the Twin XL adjustable bed frame.
Ketinggian Kaki Boleh Laras	7 inci atau 12 inci
Kapasiti Berat Maks	700 paun
Julat Condong Kepala	0 hingga 64 darjah
Julat Kecondongan Kaki	0 hingga 35 darjah
Jenis Motor	Dual, Quiet, ETL Certified
Jenis Kawalan	Alat Kawalan Jauh Berwayar
Bahan Bingkai	Sturdy Steel, Black Finish
Compatible Mattress Thickness	10-14 inches (Memory Foam or Hybrid)
Masa Perhimpunan (Anggaran)	30 minit
Berat Barang	74.9 paun

Waranti dan Sokongan

SunsGrove stands behind the quality of its products. For specific warranty details, please refer to the warranty card included with your product or visit the official SunsGrove webtapak.

Sokongan Pelanggan:

If you have any questions, require assistance with assembly, or need troubleshooting support, please contact SunsGrove customer service:

• Webtapak: Visit the SunsGrove Store on Amazon
• e-mel: Refer to your product packaging or included documentation for direct email support.
• telefon: Refer to your product packaging or included documentation for phone support.

Please have your model number (ABB-WIRED-2302) and purchase information ready when contacting support.