AJ ENJOY 44-inch Outdoor Propane Gas Fire Pit Table Instruction Manual

1. Maklumat Keselamatan Penting

Please read and understand all instructions and warnings before assembling, operating, or servicing this fire pit table. Failure to follow these instructions could result in property damage, bodily injury, or death.

• Penggunaan Luaran Sahaja: This appliance is for outdoor use only. Do not use indoors or in any enclosed area.
• Pembersihan: Maintain proper clearance from combustible materials. Ensure at least 36 inches (91 cm) from the top and sides to any combustible surfaces.
• Pengudaraan: Ensure proper ventilation. Do not obstruct the airflow around the appliance.
• Gas Propana Sahaja: Use only liquid propane (LP) gas. Do not use natural gas or any other fuel.
• Pemeriksaan Kebocoran: Perform a leak test on all gas connections before initial use and after any tank change.
• Kanak-kanak dan Haiwan Kesayangan: Keep children and pets away from the fire pit table, especially during operation.
• Permukaan Panas: Surfaces will be hot during and after use. Do not touch hot surfaces until they have cooled completely.
• Jangan sekali-kali meninggalkan tanpa pengawasan: Never leave the fire pit table unattended while in operation.
• Kecemasan: In case of a gas leak or fire, immediately turn off the gas supply at the tank and evacuate the area.

2. Produk Lebihview

The AJ ENJOY 44-inch Outdoor Propane Gas Fire Pit Table provides a warm and inviting ambiance for your outdoor living space. It features a durable PE rattan base, a stylish marble-patterned tile tabletop, and a central fire pit with a glass wind guard. The unit operates on a standard propane tank and includes an auto-ignition system for ease of use.

3. Persediaan dan Pemasangan

While some components are pre-assembled, final assembly of the fire pit table is required. It is recommended to have two people for assembly. Ensure all parts are present and undamaged before beginning.

Alat yang Diperlukan (Tidak Termasuk):

• Pemutar Skru Kepala Phillips
• Sepana Boleh Laras

Langkah Perhimpunan:

1. Buka Pembungkusan Komponen: Keluarkan semua bahagian dari bungkusan dengan berhati-hati. Letakkannya di atas permukaan yang lembut dan bersih untuk mengelakkan calar.
2. Pasang Panel Asas: Connect the PE rattan side panels using the provided hardware. Ensure the access door panel is correctly positioned for propane tank access.
3. Lampirkan Tabletop: Secure the marble-patterned tile tabletop to the assembled base.
4. Install Burner Assembly: Place the stainless steel burner assembly into the designated opening in the tabletop.
5. Sambung Talian Gas: Connect the gas hose from the burner to the regulator. Ensure all connections are tight.
6. Place Glass Rocks: Distribute the mixed color glass rocks evenly around the burner, ensuring not to cover the ignition screen.
7. Install Glass Wind Guard: Assemble and place the glass wind guard around the fire pit opening. Do not overtighten the fasteners.
8. Insert Propane Tank: Open the access door, place a standard 20 lb propane tank (not included) inside the base, and connect the regulator hose to the tank valve. Tighten securely.
9. Lakukan Ujian Kebocoran: Before first use, apply a soapy water solution to all gas connections. If bubbles appear, there is a leak. Tighten connections and retest. Do not use if leaks persist.

4. Arahan Operasi

Menyalakan Lubang Api:

1. Pastikan injap tangki propana terbuka sepenuhnya.
2. Locate the control panel on the side of the fire pit table.
3. Push and turn the control knob counter-clockwise to the 'LOW' position.
4. Immediately press and hold the igniter button. You should hear a clicking sound and see a spark.
5. Once the flame ignites, continue to hold the control knob in for 15-20 seconds to allow the thermocouple to heat up and engage the safety valve.
6. Release the control knob. If the flame goes out, repeat steps 3-5.

Melaraskan Api:

• To increase the flame height, turn the control knob further counter-clockwise towards 'HIGH'.
• To decrease the flame height, turn the control knob clockwise towards 'LOW'.

Mematikan Lubang Api:

1. Putar tombol kawalan mengikut arah jam ke kedudukan 'MATI'.
2. Close the valve on the propane tank completely.
3. Allow the unit to cool down completely before covering or moving.

5. Penyelenggaraan

Penyelenggaraan berkala memastikan jangka hayat dan operasi meja lubang api anda yang selamat.

• Pembersihan: Clean the exterior surfaces with a soft cloth and mild soap solution. Avoid abrasive cleaners. For the marble tile tabletop, use a non-acidic cleaner.
• Glass Rocks: Periodically clean the glass rocks to remove soot or debris. Ensure they are completely dry before placing them back in the fire pit.
• Burner and Ignition System: Keep the burner ports and ignition screen clear of debris. Use a soft brush to clean if necessary.
• Storan: When not in use for extended periods, especially during harsh weather, cover the fire pit table with the provided waterproof cover. Store the propane tank in a well-ventilated outdoor area, away from direct sunlight and heat sources.
• Hos dan Pengatur Gas: Inspect the gas hose and regulator for any signs of damage, cracks, or excessive wear before each use. Replace if necessary.

6. Penyelesaian masalah

If you encounter issues with your fire pit table, refer to the common problems and solutions below. For persistent problems, contact customer support.

Problem: Fire ignites but goes out when the control knob is released.

This usually indicates an issue with the thermocouple not sensing heat, causing the safety valve to close.

• Check Ignition Screen: Ensure the ignition screen (small metal plate with holes) is not covered by glass rocks. It must be visible for proper operation.
• Check Copper Wire Connection: The copper wire connected to the thermocouple might be loose. Gently tighten it with a wrench, but do not overtighten.

Problem: Fire cannot be ignited and no ticking sound is heard.

This often points to an issue with the igniter battery.

• Semak Pemasangan Bateri: Loosen the cap of the igniter button and remove the battery. Ensure the positive (+) end of the battery is facing outward when reinserting.
• Keluarkan Filem Pelindung: Verify that any protective film on the battery has been completely removed before installation.
• Gantikan Bateri: If the battery is old or depleted, replace it with a new AAA battery.

7. Spesifikasi

8. Waranti dan Sokongan

For warranty information, product support, or to order replacement parts, please contact AJ ENJOY customer service. Keep your purchase receipt and model number (AJ5103-3) handy for faster service.

Maklumat perhubungan biasanya boleh didapati di alamat pengilang webtapak atau melalui peruncit anda.