1. Pengenalan dan Lebihview
The ANDELI MCT-416 is a versatile 5-in-1 multi-process welding machine designed for various welding and cutting applications. It supports MIG (CO2/MIX/FLUX), TIG (HF), MMA, and CUT functions, operating on both 110V and 220V power supplies. This manual provides essential information for safe and effective operation, setup, maintenance, and troubleshooting of your MCT-416 welder.
Image 1.1: The ANDELI MCT-416 Multi-Process Welder, showcasing reka bentuk padat dan panel kawalannya.
2. Maklumat Keselamatan
Sentiasa utamakan keselamatan semasa mengendalikan peralatan kimpalan dan pemotongan. Kegagalan mematuhi langkah berjaga-jaga keselamatan boleh mengakibatkan kecederaan serius atau kematian.
- Alat Pelindung Diri (PPE): Always wear a welding helmet with appropriate shade, flame-resistant gloves, protective clothing, and safety shoes. Eye protection is crucial.
- Pengudaraan: Ensure adequate ventilation in the work area to avoid inhaling welding fumes, which can be hazardous.
- Keselamatan Elektrik: Never operate the machine in wet conditions. Ensure the power supply is correctly grounded. Disconnect power before performing any maintenance, changing accessories, or when the machine is not in use.
- Pencegahan Kebakaran: Jauhkan bahan mudah terbakar dari kawasan kimpalan. Sediakan alat pemadam api.
- Sinar Arka: Welding arcs produce intense visible and invisible (UV and IR) rays that can burn eyes and skin. Protect yourself and bystanders.
- Permukaan Panas: The machine and workpieces will become hot during operation. Allow them to cool before handling.
- Silinder Gas: If using shielding gas, secure gas cylinders properly and handle them with care.
Refer to local safety regulations and standards for additional guidelines.
3. Ciri-ciri Produk
The ANDELI MCT-416 offers a range of features for diverse welding and cutting needs:
- Multi-Process Capability: Performs MIG (CO2/MIX/FLUX), TIG (HF), MMA (Stick), and CUT (Plasma Cutting) functions.
- Kawalan Paparan LED: Features an intelligent LED display for easy selection of welding mode, material type, welding wire/electrode diameter, and workpiece thickness. All parameters are clearly shown.
- Dwi Voltage Input: Operates on both 110V and 220V power supplies, providing flexibility for various work environments.
- Teknologi Inverter IGBT: Utilizes advanced IGBT inverter technology for enhanced efficiency, reliability, and a higher duty cycle.
- Applicable Materials: Suitable for welding ordinary thin steel, iron, stainless steel, low-carbon steel, and for mold repair. Note: This machine is not suitable for aluminum welding.
- Pensijilan Keselamatan: CE certified for safety and quality standards.
Image 3.1: Visual representation of the various welding and cutting processes supported by the MCT-416.
Imej 3.2: Cthamples of materials and applications suitable for the MCT-416, including angle iron, square tube, stainless steel, and various metal structures.
4. Persediaan
Proper setup is crucial for safe and effective operation. Follow these steps for connecting your welding torch and accessories.
4.1 Sambungan Kuasa
- Pastikan mesin dimatikan sebelum menyambungkan kepada kuasa.
- Connect the power cord to a suitable 110V or 220V AC outlet, ensuring it matches the machine's voltagpenetapan e.
- Verify the power outlet is properly grounded.
4.2 Torch and Accessory Connection
The connection method varies depending on the welding or cutting process. Refer to the diagrams below for correct setup.
Image 4.1: Detailed connection diagrams for various welding and cutting modes.
- MMA (Kimpalan Kayu): Sambungkan pemegang elektrod ke terminal positif (+) dan penutup pembumianamp ke terminal negatif (-).
- Angkat Kimpalan TIG: Connect the TIG torch to the negative (-) terminal and the ground clamp to the positive (+) terminal. Connect the gas hose from the TIG torch to the gas regulator on the shielding gas cylinder.
- CUT (Plasma Cutting): Connect the plasma torch to the designated cutting output and the ground clamp to the workpiece. Ensure compressed air is connected to the machine.
- Kimpalan MIG/MAG: Connect the MIG torch to the Euro connector. Connect the ground clamp to the workpiece. For Gas MIG, connect the gas hose from the torch to the gas regulator on the shielding gas cylinder.
- Flux MIG Welding: Similar to MIG/MAG, but no external shielding gas is required as the flux-cored wire produces its own shielding.
5. Arahan Operasi
This section outlines the general operating procedures for the MCT-416 welder.
5.1 Panel Kawalan Selesaiview
The MCT-416 features an intuitive LED control panel for easy parameter adjustment.
Image 5.1: The LED screen and control panel, illustrating parameter displays for Synergy, MIG, Lift TIG, CUT, and MMA modes.
5.2 Langkah Operasi Am
- Hidupkan kuasa: After connecting all cables and accessories, switch on the main power switch on the machine.
- Pilih Mod: Use the control panel buttons to select the desired welding or cutting mode (MIG, TIG, MMA, CUT).
- Laraskan Parameter: Rotate and press the control knobs to set parameters such as voltage, amperage, wire feed speed, and material thickness according to your specific application. The LED display will show the current settings.
- Sediakan Bahan Kerja: Ensure the workpiece is clean and free of rust, paint, or oil. Secure the ground clamp firmly to the workpiece.
- Mulakan Operasi: Follow standard safety procedures for your chosen welding or cutting process.
- Matikan: After completing your work, switch off the machine and disconnect from the power supply.
5.3 Welding Performance Examples
The MCT-416 is capable of producing various weld types depending on the selected process.
Imej 5.2: Cthamples of weld beads and cut edges achieved with different processes: CO2 MIG, Mix Gas Welding, Flux Welding, Lift TIG, CUT, and MMA.
6. Penyelenggaraan
Regular maintenance ensures the longevity and optimal performance of your ANDELI MCT-416 welder.
- Pembersihan: Periodically clean the machine's exterior and ventilation openings to prevent dust and debris buildup, which can hinder cooling. Use dry, compressed air for internal cleaning if necessary, ensuring the machine is unplugged.
- Bahan habis pakai: Regularly inspect and replace worn-out consumables such as MIG contact tips, nozzles, TIG collets, electrodes, and plasma cutting electrodes/nozzles.
- Kabel dan Sambungan: Check all welding cables, power cords, and gas hoses for cuts, abrasions, or loose connections. Repair or replace damaged components immediately.
- Pengumpan Kawat: For MIG welding, inspect the wire feed rollers for wear and ensure they are clean and properly tensioned.
- Storan: Simpan mesin di persekitaran yang kering dan bersih apabila tidak digunakan.
7. Penyelesaian masalah
Bahagian ini menyediakan penyelesaian kepada isu biasa yang mungkin anda hadapi. Untuk masalah yang tidak disenaraikan di sini, hubungi khidmat pelanggan.
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Mesin tidak dihidupkan | No power supply; loose power cord; faulty power switch | Check power outlet; ensure power cord is securely connected; contact service if switch is faulty. |
| No welding arc / No cutting arc | Tanah longgar clamp; incorrect settings; worn consumables; machine in protection mode | Tanah selamat clamp; verify parameters on LED display; replace consumables; allow machine to cool. |
| Poor weld quality (e.g., porosity, spatter) | Incorrect parameters; insufficient shielding gas (MIG/TIG); contaminated workpiece; wrong wire/electrode | Laraskan voltage/amperage/wire speed; check gas flow and cylinder level; clean workpiece; use correct consumables. |
| Overheating alarm / Machine shuts off | Exceeded duty cycle; blocked ventilation | Allow machine to cool down; ensure ventilation openings are clear. |
| Isu penyuapan wayar (MIG) | Incorrect roller tension; clogged liner; worn contact tip | Adjust roller tension; clean or replace liner; replace contact tip. |
If an alarm appears on the display that is not covered in this manual, please contact ANDELI customer service for assistance.
8. Spesifikasi
The following table details the technical specifications for the ANDELI MCT-416 Multi-Process Welder.
Image 8.1: Detailed technical specifications for the MCT-416, including power supply, current ranges, and duty cycle.
| Spesifikasi | MIG (110V) | TIG (110V) | MMA (110V) | CUT (110V) | MIG (220V) | TIG (220V) | MMA (220V) | CUT (220V) |
|---|---|---|---|---|---|---|---|---|
| Bekalan Kuasa Voltage (V) | 110±10% | 220±15% | ||||||
| Kekerapan (Hz) | 50/60 | |||||||
| Faktor Kuasa | 0.73 | |||||||
| Kecekapan (%) | 77 | |||||||
| Vol. Tanpa Bebantage (V) | 53 | 53 | 53 | 290 | 53 | 53 | 53 | 290 |
| Rated Input Power (KW) | 3.9 | 2.9 | 3.9 | 3.6 | 5.7 | 4.2 | 7 | 6.2 |
| Arus Input Dinilai (A) | 35 | 26 | 35.5 | 33 | 26 | 19 | 32 | 28 |
| Julat Arus Kimpalan (A) | 50-120 | 10-120 | 10-100 | 20-25 | 50-160 | 10-160 | 10-160 | 20-40 |
| Duty Cycle (% 40°C 10min) | 20% (120A) | 20% (120A) | 20% (100A) | 20% (25A) | 20% (160A) | 20% (160A) | 20% (160A) | 20% (40A) |
| Cutting Thickness (MM) | / | 8 | / | 18 | ||||
| Kelas Perlindungan | IP21S | |||||||
| Kelas Penebat | H | |||||||
| Menyejukkan | Penyejukan Udara | |||||||
| Dimensi (MM) | 490×225×340 | |||||||
| Berat Bersih (KG) | 12.8 | |||||||
9. Waranti dan Sokongan
ANDELI is committed to providing quality products and customer satisfaction.
- Polisi Pemulangan dan Pertukaran: We offer returns and exchanges within 30 days of receiving the merchandise.
- Waranti: The ANDELI MCT-416 comes with a two-year warranty from the date of purchase.
- Alat Ganti: Free replacement parts are provided during the warranty period for manufacturing defects.
- Sokongan Pelanggan: If you encounter any issues or require guidance, please contact our efficient customer service team. They are available to provide free assistance.