Bileeko 4 Split Screen Reversing Camera System User Manual

pengenalan

This manual provides detailed instructions for the installation, operation, and maintenance of your Bileeko 4 Split Screen Reversing Camera System. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Kandungan Pakej

Sahkan bahawa semua item yang disenaraikan di bawah disertakan dalam pakej anda:

1 x 7-inch TFT LCD HD Monitor
2 x Belakang Keretaview Kamera
2 x 15-meter (33 feet) 4-Pin Aviation Cables
1 x Monitor Holder
1 x Convert Cable (for power/video input)
1 x Outer Frame (for monitor installation)
1 x Manual Pengguna

Image showing all components included in the Bileeko reversing camera system package: 7-inch monitor, two cameras, two long 4-pin cables, a remote control, a monitor stand, and a power/video cable.

Rajah 1: Kandungan Pakej Berakhirview

Spesifikasi

Spesifikasi Monitor:

Skrin LCD: LCD TFT 7 inci
Resolusi: 800 (W) x 480 (H) piksel
Input Video: 2-Channel (V1/V2 switchable)
Sistem Video: NTSC / PAL auto-switching
Penggunaan Kuasa: 7W
Bekalan Kuasa: DC 12V-24V

Spesifikasi Kamera:

gaya: 4 Pin Aviation Connector
Peranti Pengimejan: 1/4-inch Color CMOS
Piksel Berkesan: 628 x 586 (PAL); 510 x 496 (NTSC)
Sudut Kanta: 120 degrees (2.8mm) / 92 degrees (3.6mm)
Penglihatan Malam: 18 LED IR
Penilaian Kalis Air: IP69
Bekalan Kuasa: DC 12V-24V
Dimensi: 60.5 (L) x 27.5 (W) x 31.6 (D) mm (approx.)

Image showing the camera's IP68 waterproof rating and its dimensions in inches, highlighting its compact and durable design.

Figure 2: Camera Waterproof Rating and Dimensions

Spesifikasi kabel:

Jenis: 4-Pin Aviation Cable
Panjang: 15 meters (33 feet) per cable
ciri-ciri: Strong anti-interference, stable signal transmission

Panduan Pemasangan

1. Monitor Pemasangan

The 7-inch monitor can be installed on your vehicle's dashboard or integrated into the console using the provided outer frame.

Attach the monitor to the holder.
Secure the holder to a suitable flat surface on your dashboard.
Alternatively, for console integration, fit the monitor into the outer frame and then install it into the vehicle's console opening.

Diagram showing how the 7-inch monitor can be installed into an automobile console using an outer frame.

Figure 3: Monitor Console Installation Example

2. Penempatan Kamera

The system includes two cameras. You can install them at different locations on your vehicle (e.g., rear, side) depending on your viewing needs. The cameras are IP69 waterproof and suitable for various vehicle types including trucks, RVs, trailers, and buses.

Diagram illustrating camera placement options on different vehicles like a truck, van, bus, and agricultural machinery. It shows two cameras (B1 and B2) on a truck, with wiring options.

Figure 4: Camera Installation Diagram and Vehicle Compatibility

3. Sambungan Pendawaian

The system uses 4-pin aviation cables for stable signal transmission. Follow the wiring diagram carefully.

Menghidupkan Monitor: Connect the monitor's red and black wires to a constant 12V-24V power source in your vehicle.
Menyambungkan Kamera:
- Connect each camera to the monitor using the provided 4-pin aviation cables.
- For a camera intended for backup, connect its trigger wire (e.g., blue, green, white, brown for V1-V4 respectively) to the vehicle's reverse light power. This will automatically switch the monitor to that camera's view apabila terbalik.
- Cameras can also be wired directly to the monitor without a reverse trigger if continuous viewing dikehendaki.
Ensure all connections are secure and waterproof where necessary.

Detailed wiring diagram showing how to connect the monitor to a 12V/24V power source and how to connect two cameras (V1, V2) using 4-pin cables. It also illustrates the reverse trigger wires for automatic switching.

Rajah 5: Gambarajah Pendawaian Sistem

Close-up image of the 4-pin aviation cable connectors and a waterproof camera lens, highlighting the robust and interference-resistant design.

Figure 6: 4-Pin Aviation Cable and Waterproof Camera Lens Detail

Arahan Operasi

1. Menghidupkan/Mematikan

Once properly wired, the monitor will power on automatically when the vehicle's ignition is turned on, or when the reverse gear is engaged (if wired with a trigger).

2. Video Input Selection

The monitor supports two video inputs (V1/V2). Use the "V1/V2" button on the monitor or the remote control to switch between camera views. If a reverse trigger is connected, the monitor will automatically switch to the corresponding camera when reversing.

The 7-inch monitor displaying a split screen view, showing two different camera feeds simultaneously (CH1 and CH2).

Figure 7: Split Screen Display Example

3. Mod Paparan

The monitor offers various display modes, including single camera view and split-screen views, allowing you to monitor multiple camera feeds simultaneously. Use the mode buttons on the monitor or remote to cycle through available display configurations.

A grid of six 7-inch monitors, each showing a different video display mode, including single channel, two-channel split, and four-channel split views.

Figure 8: Available Video Display Modes

4. Pelarasan Imej

The monitor allows adjustment of brightness, contrast, and color. You can also rotate the image horizontally and vertically to achieve a mirror or normal display, as needed for your camera orientation.

Use the menu buttons on the monitor or remote control to access display settings.
Adjust parameters such as brightness, contrast, and color to your preference.
Select image rotation options (mirror/normal) if required.

Penyelenggaraan

Cleaning the Monitor: Use a soft, dry cloth to clean the monitor screen. For stubborn smudges, a slightly damp cloth with a mild, non-abrasive cleaner can be used. Avoid excessive moisture.
Membersihkan Kamera: Periodically clean the camera lenses to ensure a clear view. Use a soft cloth and, if necessary, a mild cleaning solution. The cameras are waterproof (IP69), but avoid high-pressure washing directly on the lens.
Menyemak Sambungan: Regularly inspect all cable connections for tightness and signs of wear or corrosion, especially the 4-pin aviation connectors, to ensure stable signal transmission.
Perlindungan Alam Sekitar: While the cameras are designed for outdoor use, extreme temperatures or prolonged direct sunlight can affect component lifespan.

Menyelesaikan masalah

Masalah	Kemungkinan Punca	Penyelesaian
Monitor tidak dihidupkan.	No power supply; loose power connection; faulty fuse.	Check power connections to the monitor. Ensure the vehicle's ignition is on. Verify the fuse in the power line.
No image displayed on the monitor.	Loose camera cable connection; incorrect video input selected; faulty camera or cable.	Check all 4-pin aviation cable connections. Ensure the correct video input (V1/V2) is selected. Test with another camera or cable if available.
Imej kabur atau herot.	Dirty camera lens; damaged cable; electromagnetic interference.	Clean the camera lens. Inspect cables for damage. Ensure cables are routed away from strong electrical interference sources.
Monitor does not switch to reverse camera automatically.	Reverse trigger wire not connected or incorrectly connected.	Verify the reverse trigger wire is correctly connected to the vehicle's reverse light power source.
Prestasi penglihatan malam yang lemah.	IR LEDs obstructed or faulty; dirty camera lens.	Ensure the camera lens and IR LEDs are clean and unobstructed.

Waranti dan Sokongan Pelanggan

Bileeko is committed to providing 100% customer satisfaction. If you experience any quality problems with this product within 12 months of purchase, please contact our customer service for assistance. We will replace new accessories free of charge to ensure your satisfaction.

For further support or inquiries, please refer to the contact information provided with your purchase or visit the official Bileeko webtapak.

Bileeko IA-BK Cameras-106-1