GreenYi AHD Monitor Camera System User Manual

1. Pengenalan

This manual provides comprehensive instructions for the installation, operation, and maintenance of your GreenYi AHD Monitor Camera System. This system includes a 5-inch AHD TFT LCD monitor and a universal 720P camera, designed to enhance vehicle safety by providing clear visual assistance for rear, front, or side views. Sila baca manual ini dengan teliti sebelum pemasangan dan penggunaan untuk memastikan fungsi dan keselamatan yang betul.

2. Maklumat Keselamatan

Observe the following safety precautions to prevent damage to the product and ensure safe operation:

• Ensure all power connections are secure and correctly polarized to avoid electrical shorts.
• Disconnect the vehicle's battery before performing any wiring to prevent electrical hazards.
• Jangan halang pemandu view atau mengganggu kawalan kenderaan semasa pemasangan.
• Avoid installing the monitor or camera in locations exposed to extreme temperatures or direct sunlight for prolonged periods.
• This system is an aid to driving and does not replace the driver's responsibility for safe operation and awareness of surroundings.

3. Kandungan Pakej

Sahkan bahawa semua item yang disenaraikan di bawah disertakan dalam pakej anda:

Rajah 3.1: Berakhirview daripada semua komponen yang disertakan.

Monitor Package:

• 1 x 5-inch AHD 800x480 Car TFT LCD Monitor
• 1 x Penyesuai Kuasa Pemetik Rokok
• 1 x Dashboard Mounting Bracket
• 1 x Windshield Suction Cup Mounting Bracket
• 1 x 5FT Power Cable (for monitor)
• 1 x User Manual (for monitor)
• 1 x RCA Video Coupler

Camera Package:

• 1 x HD 720P Backup Camera
• 1 x 26FT Double Shielded Video Cable
• 1 x 5FT Power Cable (for camera)
• 1 x Metal Holder set
• 1 x Accessory Bag for Metal Holder
• 1 x Silicone Holder
• 1 x Accessory Bag for Silicone Holder
• 1 x User Manual (for camera)
• 1 x Pita Pelekat
• 1 x Removal Tool
• 5 x Zip Ikatan
• 5 x Wire Clamps
• 1 x Pemutar Skru Mini
• 1 x RCA Male to Male Coupler
• 1 x RCA Female to Female Coupler
• 1 x Electric Adhesive Tape
• 2 x T-tap Sets

4. Spesifikasi Produk

Spesifikasi Monitor:

Spesifikasi Kamera:

5. Persediaan & Pemasangan

5.1 Pemasangan Monitor

The monitor can be installed using either the dashboard mounting bracket or the windshield suction cup mounting bracket.

1. Pilih Lokasi: Select a location on your dashboard or windshield that does not obstruct your view atau mengganggu kawalan kenderaan.
2. Lampirkan Kurungan:
   • For dashboard mount: Secure the dashboard bracket to the desired surface using the adhesive pad or screws (not included).
   • For suction cup mount: Press the suction cup firmly against a clean, smooth windshield surface and engage the locking lever.
3. Gunung Monitor: Attach the monitor to the chosen bracket. Adjust the angle for optimal viewing.
4. Sambungan Kuasa: Connect the monitor's power cable to the cigarette lighter adapter or directly to a 12-30V DC power source in your vehicle.

Rajah 5.1: Monitor and camera components.

5.2 Pemasangan Kamera

The camera offers versatile installation options for front, rear, or side views. Use the provided metal or silicone holders.

Rajah 5.2: Examples of camera installation positions.

1. Select Mounting Position: Choose a suitable location (e.g., license plate area for rear view, grille for front view, under side mirror for side view).
2. Pemegang Lampirkan: Secure the metal or silicone holder to the chosen surface using screws or adhesive tape.
3. Lekapkan Kamera: Insert the camera into the holder.
4. Laraskan Sudut: Use the mini screwdriver to adjust the camera's lens angle (360-degree rotatable body) for the desired viewperspektif.
   

   Rajah 5.3: Camera angle adjustment.

5.3 Gambarajah Pendawaian

Follow the wiring diagram carefully to connect the camera to the monitor and vehicle power supply.

Rajah 5.4: Wiring connections for the camera system.

• Connect the 4-pin camera cable to the provided 26FT Double Shielded Video Cable.
• Connect the video cable's RCA end to the monitor's video input. The yellow plug is typically for the rear view kamera.
• Connect the camera's 5FT power cable:
  • wayar merah: Connect to a 12-24V DC power source (e.g., reversing light positive, brake light positive, turning light positive, or ACC).
  • Kawat hitam: Connect to vehicle ground (GND).
• If connecting to a head unit with a trigger wire, connect the trigger wire (usually labeled "Reverse" or "Back") from the head unit to the reversing light positive.
• Ensure all connections are secure and insulated using the provided electrical adhesive tape and zip ties.

Nota: All 4-pin cameras require the use of the provided power cable for connection to any monitor.

6. Operasi

6.1 Memantau Operasi

The monitor will automatically power on and display the camera feed when the connected power source (e.g., reverse gear) is activated.

Rajah 6.1: Monitor rear view with menu controls.

Use the buttons on the back of the monitor to access and adjust settings:

• Butang Menu: Press to enter the menu and navigate through options.
• Butang Naik / Turun: Use to adjust values or select menu items.
• Available Settings: Brightness, Contrast, Saturation, Tint, Language, Mode, Reset.

6.2 Ciri-ciri Kamera

The camera offers customizable features via switcher cables:

Rajah 6.2: Camera feature switcher cables.

• Kabel Putih: Cut this cable to switch between mirror (rear view, default) and non-mirror (front view) image display.
• Kabel Oren: Cut this cable to switch between CVBS and AHD video signal output. Ensure this matches your monitor's input capability.
• Kabel Hijau: Cut this cable to toggle parking guidelines ON or OFF.

Nota: Perform these cable modifications before final installation and power connection.

Rajah 6.3: Camera fisheye lens with 170-degree viewsudut ing.

Kamera ini mempunyai sudut lebar 170 darjah viewing angle fisheye lens, designed to cover a broad area and minimize blind spots.

7. Penyelenggaraan

• Pembersihan: Gunakan yang lembut, damp cloth to clean the monitor screen and camera lens. Avoid abrasive cleaners or solvents.
• Pemeriksaan Kabel: Periodically check all cables and connections for wear, damage, or loose contacts.
• Kejelasan Lensa: Ensure the camera lens remains free of dirt, mud, snow, or ice to maintain clear image quality.
• Keselamatan Pemasangan: Verify that the monitor and camera mounts are secure and have not loosened over time due to vehicle vibrations.

8. Penyelesaian masalah

9. Waranti & Sokongan

For warranty information and technical support, please refer to the specific warranty card included in your product package or contact GreenYi customer service directly. Keep your purchase receipt as proof of purchase.

Maklumat Hubungan: Sila layari laman web rasmi GreenYi weblaman web atau rujuk butiran hubungan yang diberikan dalam pembungkusan produk anda untuk sokongan.