NYXI Joypad Wireless Controller for Nintendo Switch/Lite/OLED

1. Pengenalan

Thank you for choosing the NYXI Joypad Wireless Controller. This manual provides detailed instructions on how to set up, operate, and maintain your controller for an optimal gaming experience on Nintendo Switch, Switch Lite, and Switch OLED consoles.

2. Kandungan Pakej

Sila semak kandungan pakej semasa membuka kotak:

• NYXI Joypad Wireless Controller (Left & Right)
• Kabel Pengecas USB-C
• Manual Pengguna

3. Susun Atur Pengawal

Familiarize yourself with the buttons and features of your NYXI Joypad Controller:

• Joypad kiri: Left Analog Stick, D-Pad, L/ZL Buttons, Capture Button, Minus (-) Button, Programmable Button (M1)
• Joypad Kanan: Right Analog Stick, A/B/X/Y Buttons, R/ZR Buttons, Home Button, Plus (+) Button, Programmable Button (M2)
• Both Joypads: RGB LED Indicators, USB-C Charging Port, Sync Button

Note: Specific button functions may vary depending on the game.

4. Persediaan

4.1 Pengecasan Awal

Before first use, fully charge the controllers. Connect the USB-C charging cable to the charging port on each joypad and then to a USB power source (e.g., Nintendo Switch dock, USB wall adapter). The RGB LED indicators will show charging status and turn off when fully charged.

4.2 Berpasangan dengan Nintendo Switch

There are two methods to pair your NYXI Joypad controllers with your Nintendo Switch console:

1. Method 1: Direct Attachment

   Slide the left and right Joypads onto the side rails of your Nintendo Switch console until you hear a click. The console will automatically detect and pair the controllers. Once paired, you can detach them for wireless play.
2. Method 2: Wireless Pairing
   • From the Nintendo Switch HOME Menu, select "Controllers" > "Change Grip/Order".
   • On each NYXI Joypad, press and hold the small Butang Segerak (usually located on the side or bottom) for a few seconds until the RGB LED indicators start flashing rapidly.
   • The console will detect the controllers. Once paired, the LED indicators will light up steadily.

Ensure your Nintendo Switch console is updated to the latest system software version for optimal compatibility.

5. Arahan Operasi

5.1 Wake Up Function

When the console is in sleep mode, press the Butang Rumah on the right Joypad to wake up the Nintendo Switch console wirelessly.

5.2 Fungsi Turbo

The Turbo function allows for rapid, continuous input of a button press. To activate:

1. Press and hold the desired action button (e.g., A, B, X, Y, L, R, ZL, ZR).
2. While holding the action button, press the Butang Turbo (refer to controller diagram if available, or typically a dedicated button).
3. Release both buttons. The action button will now continuously input until Turbo is deactivated.

To deactivate Turbo, repeat the process: hold the action button and press the Turbo Button again.

5.3 RGB LED Adjustment

The NYXI Joypads feature adjustable RGB LED lighting. Specific controls for changing colors or modes are usually found by pressing a dedicated LED button or a combination of buttons (e.g., L3 + R3 + A). Refer to the quick start guide or product packaging for exact button combinations.

5.4 Adjustable Vibration

The vibration intensity can be adjusted to your preference. This is typically done through a button combination (e.g., Turbo + D-Pad Up/Down) or via the Nintendo Switch system settings under "Controllers and Sensors".

5.5 Programmable Buttons (M1/M2)

The M1 (left Joypad) and M2 (right Joypad) buttons can be programmed to mimic other button inputs or sequences. Follow these general steps to program them:

1. Tekan dan tahan butang Butang Program (often a small button on the back or side, or a combination like SET + M1/M2) until an indicator light flashes.
2. Press the button or sequence of buttons you wish to assign to M1/M2.
3. Press the M1 or M2 button to confirm the assignment. The indicator light will stop flashing.

To clear a programmed button, repeat the programming process without inputting any new buttons, or refer to specific instructions for a reset function.

6. Penyelenggaraan

6.1 Pembersihan

To clean your controllers, use a soft, dry cloth. For stubborn dirt, slightly dampen the cloth with water or a mild, non-abrasive cleaner. Do not use harsh chemicals or solvents. Ensure no liquid enters the controller's openings.

6.2 Penyimpanan

Store the controllers in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity. If storing for an extended period, ensure they are fully charged to preserve battery life.

7. Penyelesaian masalah

7.1 Controller Not Pairing

• Ensure the controllers are sufficiently charged.
• Verify the Nintendo Switch console is updated to the latest system software.
• Try re-pairing using both direct attachment and wireless pairing methods.
• Mulakan semula konsol Nintendo Switch anda.
• Reset the controllers by pressing the small reset button (if available, often a pinhole) or holding the Sync button for an extended period.

7.2 Kelewatan atau Pemotongan Input

• Ensure there are no obstructions between the controllers and the console.
• Move closer to the console.
• Semak peranti wayarles lain yang mungkin menyebabkan gangguan.
• Ensure controllers are fully charged.

7.3 Butang Tidak Memberi Respons

• Check if the button is stuck or obstructed.
• Test the button in the Nintendo Switch "Test Input Devices" settings.
• Lakukan tetapan semula pengawal.

8. Spesifikasi

9. Waranti dan Sokongan

NYXI products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the contact information provided on the product packaging or visit the official NYXI webtapak. Simpan bukti pembelian anda untuk tuntutan waranti.

Please note that warranty terms may vary by region and retailer.