pengenalan
Welcome to your new RYOBI ONE+ 18V Dual-Port Simultaneous Charger. This charger is designed to efficiently charge two RYOBI ONE+ 18V lithium-ion batteries simultaneously, reducing downtime and enhancing productivity. Please read this manual thoroughly before operation to ensure safe and optimal performance.
Maklumat Keselamatan Penting
Peraturan Keselamatan Am
- Baca semua arahan sebelum menggunakan pengecas.
- Do not charge batteries in damp atau lokasi basah.
- Use only RYOBI ONE+ 18V lithium-ion batteries with this charger.
- Jangan gunakan pengecas jika kord atau palamnya rosak.
- Jauhkan pengecas daripada sumber haba dan cahaya matahari langsung.
- Pastikan pengudaraan yang betul semasa mengecas.
- Unplug the charger from the power supply when not in use or before cleaning.
Keselamatan Elektrik
- This charger is designed for 120V AC household current only.
- Do not use extension cords unless absolutely necessary. If an extension cord is used, ensure it is properly rated for the charger's power requirements.
- Do not abuse the cord. Never carry the charger by the cord or yank it to disconnect from a receptacle.
Kandungan Pakej
The RYOBI ONE+ 18V Dual-Port Simultaneous Charger (PCG005) package includes:
- 1 x RYOBI 18V ONE+ Dual Port Charger (PCG005)
- 1 x Kuasa Kuasa
Image: RYOBI ONE+ 18V Dual-Port Simultaneous Charger with power cord, illustrating what is included in the package.
Ciri-ciri Utama
- Pengecasan Dwi-Port: Charges two RYOBI ONE+ 18V batteries simultaneously.
- Faster Charging Speed: Provides up to 2X faster charging compared to standard chargers.
- Mod Jimat Tenaga: Automatically conserves power when not in use.
- Clear LED Indicators: Displays charging status, full charge, and fault conditions.
- Keserasian Luas: Works with all RYOBI ONE+ 18V lithium-ion batteries.
- Perlindungan Terbina dalam: Includes Smart Battery Detection, Overcharge & Thermal Protection, Short Circuit Protection, and LED Fault Indicators.
Image: RYOBI ONE+ 18V Dual-Port Simultaneous Charger highlighting its key features such as dual-port charging and LED indicators.
Arahan Persediaan
Membongkar
Carefully remove the charger and all accessories from the packaging. Inspect the unit for any damage that may have occurred during shipping. Do not discard packaging until you are satisfied with the product.
Menyambung kepada Kuasa
- Plug the power cord into the charger's power input port.
- Plug the other end of the power cord into a standard 120V AC electrical outlet.
- The charger's LED indicators may briefly illuminate to confirm power connection.
Arahan Operasi
Mengecas Bateri
- Pastikan pengecas dipalamkan ke sumber kuasa.
- Align the ribs on the battery with the grooves in the charger port.
- Slide the battery onto the charger until it clicks into place. You can insert one or two batteries at a time.
- The charger's LED indicators will show the charging status.
Image: A hand inserting a RYOBI ONE+ 18V battery into the charger, demonstrating one-handed battery insertion.
Memahami Penunjuk LED
The charger features LED indicators for each charging port to communicate battery status:
- Hijau Pepejal: Bateri dicas penuh.
- Hijau Berkelip: Bateri sedang dicas.
- Merah Pepejal: Battery is too hot or too cold to charge. The charger will wait until the battery reaches an acceptable temperature before charging.
- Merah Berkelip: Battery is defective or there is a fault with the charger. Remove the battery and try a different one. If the issue persists, contact customer support.
Image: RYOBI ONE+ 18V Dual-Port Simultaneous Charger with two batteries inserted, showing the green LED indicators for charging status.
Removing a Battery
To remove a battery, press the release latches on the battery and slide it off the charger.
Penyelenggaraan
Pembersihan
Unplug the charger before cleaning. Use a clean, damp cloth to wipe the exterior of the charger. Do not use strong detergents or solvents. Keep the charging ports free of debris.
Penyimpanan
Store the charger in a cool, dry place, away from direct sunlight and moisture. Ensure batteries are removed from the charger before storage.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Charger not working / No LED indication | Tiada kuasa pada pengecas. | Ensure the power cord is securely plugged into both the charger and a working electrical outlet. Check the circuit breaker. |
| Battery not charging (Solid Red LED) | Bateri terlalu panas atau terlalu sejuk. | Allow the battery to reach room temperature before attempting to charge again. |
| Battery not charging (Flashing Red LED) | Defective battery or charger fault. | Remove the battery and try charging a different, known-good battery. If the issue persists with multiple batteries, the charger may be faulty. Contact customer support. |
| Pengecasan perlahan | Environmental factors or battery condition. | Ensure the charger is in a well-ventilated area. Older or heavily used batteries may charge slower. |
Spesifikasi
- Jenama: RYOBI
- model: PCG005
- Input Voltage: 120 volt AC
- Keluaran Voltage: 26.25 volt DC
- Penilaian Semasa: 4 A
- Bilangan Pelabuhan: 2
- Peranti Serasi: RYOBI ONE+ 18V lithium-ion batteries
- Pensijilan Keselamatan: UL, CSA, or ETL compliant
Waranti dan Sokongan
RYOBI products are manufactured to high-quality standards. For information regarding product warranty, please refer to the warranty card included with your purchase or visit the official RYOBI website. For technical assistance or customer support, please contact RYOBI customer service.