Hudson Valley Lighting 3060-BLNK

Hudson Valley Lighting Jonas LED Island Pendant Instruction Manual

Model: 3060-BLNK

1. Pengenalan

Terima kasih kerana membeliasing the Hudson Valley Lighting Jonas LED Island Pendant. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new lighting fixture. Please read all instructions carefully before beginning installation and retain this manual for future reference.

The Jonas pendant features a modern design with a Black Nickel finish, integrated LED lighting, and is suitable for damp locations. Its dimensions are 60 inches in length, 5.5 inches in width, and 10.5 inches in height.

Hudson Valley Lighting Jonas LED Island Pendant in Black Nickel finish

Image 1.1: Hudson Valley Lighting Jonas LED Island Pendant. This image shows the full pendant light fixture with its sleek, linear design and Black Nickel finish.

2. Maklumat Keselamatan

AMARAN: To avoid the risk of electric shock, always disconnect power at the main circuit breaker or fuse box before beginning installation or performing any maintenance. Ensure the power is off before touching any electrical components.

  • Semua sambungan elektrik mestilah mengikut kod tempatan, ordinan atau Kod Elektrik Kebangsaan (NEC). Rujuk juruelektrik bertauliah jika anda tidak biasa dengan sambungan pendawaian elektrik yang betul.
  • This fixture is designed for 120-volt electrical systems.
  • Do not install this fixture in areas exposed to direct water spray or submersion. It is rated for damp lokasi sahaja.
  • Handle the fixture with care. The shade material is glass, which can break if dropped or mishandled.
  • Amaran Proposisi 65: Produk ini mungkin mengandungi bahan kimia yang diketahui oleh Negeri California untuk menyebabkan kanser dan kecacatan kelahiran atau bahaya pembiakan lain. Basuh tangan selepas mengendalikan.

3. Kandungan Pakej

Carefully unpack your fixture and check that all parts are included. If any parts are missing or damaged, do not attempt to assemble or install the fixture. Contact customer service for assistance.

  • Jonas LED Island Pendant Fixture
  • Perkakasan Pemasangan (kanopi, plat pemasangan, skru, nat dawai)
  • Manual Arahan (dokumen ini)
  • Remote Control (for operation)

4. Persediaan dan Pemasangan

Alat yang Diperlukan (tidak termasuk): Phillips screwdriver, flathead screwdriver, wire strippers, electrical tape, safety glasses, ladder.

Perhimpunan Diperlukan: Yes. Professional installation by a qualified electrician is recommended for safety and proper functionality.

  1. Matikan Kuasa: Locate the circuit breaker controlling the power to the installation location and turn it off. Verify power is off using a voltage penguji.
  2. Sediakan Pemasangan: Attach the mounting plate to the junction box in the ceiling using the provided screws. Ensure the plate is securely fastened.
  3. Laraskan Ketinggian: Determine the desired hanging height for the pendant. The fixture has an adjustable suspension system. Adjust the length of the suspension rods or wires as needed before wiring.
  4. Sambungan Wayar: Connect the fixture's electrical wires to the corresponding wires from the junction box.
    • Sambungkan hitam wayar lekapan ke hitam (hot) supply wire.
    • Sambungkan putih wayar lekapan ke putih wayar bekalan (neutral).
    • Sambungkan green or bare copper fixture ground wire to the green or bare copper (ground) supply wire.
    Selamatkan semua sambungan dengan nat wayar dan balut dengan pita elektrik untuk keselamatan tambahan.
  5. Lekapan Lekapan: Carefully push the wired connections into the junction box. Align the fixture canopy with the mounting plate and secure it using the provided screws. Ensure no wires are pinched during this step.
  6. Pulihkan Kuasa: Setelah lekapan dipasang dengan selamat, pulihkan kuasa pada pemutus litar.
Diagram of pendant light mounting hardware

Imej 4.1: Cthample of mounting hardware for a pendant light. This image illustrates typical components like the mounting plate and canopy used for ceiling installation.

5. Arahan Operasi

The Hudson Valley Lighting Jonas LED Island Pendant is controlled via a remote control. Ensure the remote control has working batteries (not included, typically AAA or CR2032 type) before use.

  1. Hidupkan/Mati Kuasa: Press the 'ON' button on the remote to turn the light on. Press the 'OFF' button to turn the light off.
  2. Peredupan: If your remote control includes dimming functions, use the '+' and '-' buttons to adjust the brightness level of the LED light.
  3. Pairing Remote (if necessary): If the fixture does not respond to the remote, you may need to pair it. Refer to the specific remote control instructions for pairing procedures, which typically involve turning the fixture power off and on, then pressing a pairing button on the remote within a short timeframe.

6. Penyelenggaraan

Regular maintenance will help preserve the appearance and functionality of your Jonas LED Island Pendant.

  • Pembersihan: Disconnect power before cleaning. Use a soft, dry or slightly damp cloth to wipe the exterior surfaces. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or electrical components.
  • Sumber Lampu LED: This fixture uses an integrated LED light source. The LEDs are designed for long life and are not user-replaceable. If the LED light source fails, the entire fixture may need to be replaced. Contact customer support for assistance.
  • Pemeriksaan: Periksa semua sambungan dan perkakasan pelekap secara berkala untuk memastikan ia kekal selamat.

7. Penyelesaian masalah

If you experience issues with your fixture, refer to the following troubleshooting guide:

MasalahKemungkinan PuncaPenyelesaian
Cahaya tidak menyala.Tidak ada kekuatan untuk perlawanan.Check circuit breaker or fuse. Ensure wall switch (if any) is on.
Sambungan wayar longgar.Turn off power at the breaker. Check all wire connections inside the canopy.
Remote control batteries are dead or remote is not paired.Replace remote batteries. Refer to Section 5 for remote pairing instructions.
Cahaya berkelip atau malap tanpa diduga.Sambungan wayar longgar.Turn off power at the breaker. Check all wire connections.
Suis dimmer yang tidak serasi (jika berkenaan).Ensure a compatible LED dimmer switch is used. Consult a qualified electrician.

If the problem persists after attempting these solutions, contact a qualified electrician or Hudson Valley Lighting customer support.

8. Spesifikasi

CiriPerincian
JenamaPencahayaan Lembah Hudson
Nama ModelJonas
Nombor Model3060-BLNK
Warna SelesaiNikel Hitam
bahanBrass, Alloy Steel, Iron, Glass
Dimensi Produk60"L x 5.5"W x 10.5"H
Jenis Sumber CahayaLED bersepadu
Bilangan Sumber Cahaya1
Wattage26 Watt
Kecerahan1122 Lumen
Suhu Warna3000 Kelvin (Putih Hangat)
CRI90
Voltage120 Volt
Penilaian KelembapanDamp Dinilai
Jenis PemasanganPemasangan Semi Flush
Kaedah KawalanJauh
Berat Barang11.9 paun
UPC806134084103

9. Waranti dan Sokongan

This Hudson Valley Lighting fixture comes with a manufacturer's warranty. For specific details regarding warranty coverage and duration, please refer to the warranty information provided at the time of purchase or contact Hudson Valley Lighting directly.

For technical assistance, missing parts, or warranty claims, please contact Hudson Valley Lighting customer support. Have your model number (3060-BLNK) and proof of purchase ready when contacting support.

Hudson Valley Lighting Contact Information:
Please visit the official Hudson Valley Lighting website for the most current contact details, including phone numbers and support email addresses.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.