1. Pengenalan
Terima kasih kerana membeliasing the BRUNO Temperature Control Multi Kettle BOE103-WGY. This versatile electric kettle is designed to simplify your daily routines, offering precise temperature control, a keep-warm function, and a reservation timer. With its included attachments, you can enjoy a variety of hot beverages and simple meals. Please read this manual thoroughly before use to ensure safe and optimal operation.
Figure 1: BRUNO Temperature Control Multi Kettle BOE103-WGY
2. Langkah-langkah Keselamatan
To prevent injury or damage to the product, always follow these basic safety precautions:
- Jangan rendamkan tapak cerek, kord kuasa atau palam ke dalam air atau cecair lain.
- Pastikan voltagPenarafan pada perkakas sepadan dengan bekalan kuasa tempatan anda sebelum menyambungkannya.
- Jauhkan perkakas daripada kanak-kanak dan haiwan peliharaan.
- Do not operate the kettle if the power cord or plug is damaged.
- Always place the kettle on a stable, flat, heat-resistant surface.
- Do not fill the kettle above the MAX line or below the MIN line.
- Elakkan menyentuh permukaan panas. Gunakan pemegangnya.
- Cabut plag cerek dari alur keluar apabila tidak digunakan dan sebelum dibersihkan.
- Perkakas ini adalah untuk kegunaan rumah sahaja.
3. Komponen Produk
The BRUNO Temperature Control Multi Kettle BOE103-WGY includes the following components:
- Kettle Body with Base
- Penapis Teh
- Water Bath Cup
- Pemegang Telur
Figure 2: Included Components and Packaging
4. Spesifikasi
| Spesifikasi | Perincian |
|---|---|
| Jenama | BRUNO |
| Nombor Model | BOE103-WGY |
| Kapasiti | 1 Liter |
| bahan | kaca |
| warna | Kelabu Hangat |
| Ciri Khas | Keep Warm Function, Temperature Control, Boil-Dry Protection |
| Voltage | 100 Volt |
| Penggunaan Kuasa | 900 Watt |
| Dimensi Produk (L x W x H) | 25.3 cm x 16.8 cm x 18.5 cm |
| Berat Produk | 1.2 Kilogram |
5. Persediaan
5.1 Pembersihan Awal
- Keluarkan semua bahan pembungkusan dan label dari cerek.
- Lap bahagian luar cerek dengan iklanamp kain.
- Wash the interior of the kettle, lid, and all attachments (tea strainer, water bath cup, egg holder) with warm, soapy water. Rinse thoroughly and dry.
- Fill the kettle with water to the MAX line and boil. Discard this water. Repeat this process 2-3 times to remove any manufacturing residues.
5.2 Penempatan
Place the kettle base on a dry, flat, and stable surface away from the edge of the countertop. Ensure there is sufficient space around the kettle for steam to escape safely.
6. Arahan Operasi
6.1 Basic Operation and Temperature Control
The kettle features a touch panel for easy temperature and time adjustments.
- Fill the kettle with the desired amount of water. Do not exceed the 1L MAX line.
- Place the kettle securely on its power base.
- Tekan butang Kuasa (⏻) to turn on the kettle.
- Gunakan + dan - buttons to adjust the desired temperature between 45°C and 100°C in 1°C increments. Preset temperatures (50, 60, 70, 75, 80, 85, 90, 95, 100°C) are also available for quick selection.
- Press the SET button to confirm the temperature. The kettle will begin heating.
- Once the target temperature is reached, the kettle will beep and automatically switch to the Keep Warm function (if enabled).
Figure 3: Touch Control Panel for Temperature Adjustment
6.2 Fungsi Kekalkan Panas
After reaching the set temperature, the kettle can maintain the temperature for a specified duration.
- Press the Keep Warm button (♨) after setting the desired temperature.
- Gunakan + dan - buttons to set the keep warm duration from 1 to 6 hours in 1-hour increments.
- The kettle will automatically maintain the temperature for the set time.
6.3 Fungsi Tempahan
The reservation function allows you to schedule the kettle to start heating at a later time.
- Fill the kettle with water and place it on the base.
- Set your desired target temperature.
- Press the Reservation button (◷).
- Gunakan + dan - buttons to set the delay time from 30 minutes up to 24 hours in 10-minute increments.
- The kettle will start heating after the set delay time.
6.4 Boil-Dry Protection
The kettle is equipped with a boil-dry protection feature. If the kettle is accidentally switched on without water or if the water level is too low, it will automatically shut off to prevent damage.
6.5 Menggunakan Lampiran
The BRUNO Multi Kettle comes with three attachments to expand its functionality:
- Tea Strainer: Insert the tea strainer into the kettle before adding water and your preferred tea leaves. Set the desired temperature for brewing.
- Water Bath Cup: Place the water bath cup inside the kettle. Fill the kettle with water around the cup, and place ingredients (e.g., macaroni, baby food) into the cup. Set the temperature for gentle cooking or warming.
- Pemegang Telur: Place the egg holder inside the kettle. Carefully place eggs into the holder. Fill the kettle with water to cover the eggs. Set the desired temperature and time for soft-boiled or hard-boiled eggs.
Figure 4: Kettle Attachments (Tea Strainer, Water Bath Cup, Egg Holder)
Figure 5: Egg Holder in Use
6.6 Temperature Guide for Common Uses
Figure 6: Recommended Temperatures for Various Preparations
This video demonstrates the various functions and uses of the BRUNO Temperature Control Multi Kettle, including temperature setting and attachment usage.
Video 1: BRUNO Temperature Control Multi Kettle Overview
7. Penyelenggaraan dan Pembersihan
Regular cleaning ensures the longevity and hygiene of your kettle.
7.1 Pembersihan Harian
- Sentiasa cabut plag cerek dan biarkan ia sejuk sepenuhnya sebelum dibersihkan.
- The kettle has a wide opening, making it easy to clean the interior. Use a soft sponge and mild dish soap to clean the inside.
- The gasket on the lid is removable for thorough cleaning.
- Lap bahagian luar dengan iklanamp kain. Jangan gunakan pembersih yang melelas atau pad penyental.
- Rinse all parts thoroughly and dry completely before reassembling or storing.
Figure 7: Easy Cleaning with Wide Opening
7.2 Descaling (Citric Acid Cleaning)
Mineral deposits (limescale) can build up over time, affecting performance. Descale your kettle regularly, especially in hard water areas.
- Fill the kettle with water up to the MAX line.
- Add 1-2 tablespoons of citric acid powder to the water.
- Boil the water with the citric acid solution.
- Let the solution sit in the kettle for 15-30 minutes, or longer for heavy deposits.
- Discard the solution and rinse the kettle thoroughly several times with fresh water to remove any residue.
8. Penyelesaian masalah
If you encounter any issues with your kettle, please refer to the following table before contacting customer support.
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Cerek tidak menyala. | Tidak dipasang; Kuasa outage; Kettle not properly seated on base. | Check power connection; Verify power supply; Ensure kettle is correctly placed on the base. |
| Air tidak memanaskan. | Temperature not set; Boil-dry protection activated. | Set desired temperature; Add water if low, then restart. |
| Bau atau rasa yang luar biasa. | Bau perkakas baharu; Mendapan mineral. | Perform initial cleaning steps again; Descale the kettle. |
| Cerek mati lebih awal. | Boil-dry protection activated; Overheating. | Ensure sufficient water; Allow kettle to cool down before restarting. |
9. Waranti dan Sokongan
This BRUNO product is covered by a manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions.
For technical support, service, or replacement parts, please contact BRUNO customer service through the contact information provided on your warranty card or the official BRUNO website. Please have your model number (BOE103-WGY) and proof of purchase ready when contacting support.
