OOYCYOO MPPT 100A Solar Charge Controller User Manual

1. Pengenalan dan Lebihview

This manual provides essential information for the safe and efficient operation of your OOYCYOO MPPT 100A Solar Charge Controller. This device is designed to manage power flow from your solar panels to your battery bank, ensuring optimal charging and protecting your batteries from overcharge and over-discharge. It features Maximum Power Point Tracking (MPPT) technology for high efficiency and supports various battery types including sealed, gel, flooded, and lithium batteries. The controller automatically detects 12V or 24V DC system voltages.

2. Arahan Keselamatan

• Ensure all connections are tight and correct to prevent damage or injury.
• Always connect the battery to the charge controller first, then the solar panels, and finally the load. Disconnect in the reverse order.
• Do not short-circuit the solar panel or battery terminals.
• Pasang pengawal di kawasan yang mempunyai pengudaraan yang baik, jauh daripada bahan mudah terbakar dan cahaya matahari langsung.
• This device is for indoor use only. Protect it from water and moisture.
• Hanya kakitangan yang berkelayakan harus melakukan pemasangan dan penyelenggaraan.
• Pakai peralatan pelindung diri (PPE) yang sesuai semasa bekerja dengan sistem elektrik.

3. Ciri-ciri Produk

• Teknologi MPPT Lanjutan: Minimum 99.99% tracking efficiency and maximum 99% conversion efficiency.
• Sistem Automatik Voltage Pengesanan: Compatible with 12V and 24V DC systems.
• Kapasiti Arus Tinggi: 100A maximum power current.
• Keserasian Bateri Serbaguna: Supports sealed, gel, flooded, and lithium battery types.
• Perlindungan Komprehensif: Includes protection against overcharge, over-discharge, overload, short circuit, reverse polarity, overheating, and battery undervoltage.
• Paparan LCD: Provides clear data display and system status monitoring.
• Kawalan Mesra Pengguna: Adjustable load operating mode, one-key load control (open/close), and one-key factory reset function.
• Penderia Suhu: External temperature sensor included for accurate battery charging compensation.

4. Kandungan Pakej

• 1 x OOYCYOO MPPT Solar Charge Controller (Model: K 2500W 100A)
• 1 x Penderia Suhu
• 1 x Manual Pengguna (Bahasa Inggeris)

5. Persediaan dan Pemasangan

5.1 Memasang Pengawal

Mount the controller vertically on a wall or a stable surface in a dry, well-ventilated indoor environment. Ensure there is sufficient space around the controller for heat dissipation. The controller features 5 mounting holes for secure installation.

5.2 Sambungan Pendawaian

Follow the wiring order precisely to avoid damage to the controller or other components. Use appropriate wire gauges (recommended 20 mm² or 4# AWG for main power connections) and ensure all connections are secure.

1. Sambungkan Bateri: Connect the battery cables to the battery terminals on the controller (marked 'BATTERY'). Ensure correct polarity (+ to + and - to -). The controller will automatically detect the system voltage (12V atau 24V).
2. Connect the Solar Panels: Connect the solar panel cables to the solar input terminals (marked 'SOLAR'). Ensure correct polarity.
3. Sambungkan Beban: Connect your DC load to the load terminals (marked 'LOAD'). Ensure correct polarity.
4. Sambungkan Sensor Suhu: Plug the external temperature sensor into its designated port (marked 'TEMP SENSOR'). Place the sensor near the battery for accurate temperature compensation during charging.
5. Output USB: The controller includes USB 5V 2A output ports for charging small electronic devices.
6. Pelabuhan Komunikasi: The RS485 communication port (marked 'COM PV BATT') allows for external monitoring or control (if applicable).

6. Arahan Operasi

6.1 Kuasa Permulaan

Once the battery is connected, the controller will power on and automatically detect the system voltage. The LCD display will show real-time system information.

6.2 Kawalan Beban

The controller allows for manual control of the DC load output. Use the designated button (often labeled 'A' or similar) to toggle the load on or off. Refer to the display section for button functions.

6.3 Pemilihan Jenis Bateri

The controller is compatible with multiple battery types. While some parameters are automatically detected, specific battery types (sealed, gel, flooded, lithium) may require selection or fine-tuning through the controller's interface to ensure optimal charging profiles. Consult the on-screen menu or the included English user manual for detailed instructions on setting battery parameters.

7. Display and Button Functions

The LCD screen provides real-time monitoring of your solar system's performance. It displays information such as battery voltage, charging current, load current, and system status. The controller typically features buttons for navigation and settings adjustment.

• Paparan LCD: Shows all operational information at one time.
• '5S Reset' Button: Used for resetting certain parameters or functions by holding for 5 seconds.
• Load Control Button: A dedicated button (often indicated by an 'A' or similar icon) to open or close the load output.
• Butang Tetapan Semula Kilang: A button to restore the controller to its default factory settings.

8. Penyelenggaraan

Penyelenggaraan berkala memastikan jangka hayat dan prestasi optimum pengawal cas solar anda.

• Semak Sambungan: Periksa secara berkala semua sambungan pendawaian untuk kesesakan dan kakisan.
• Bersihkan Pengawal: Keep the controller clean and free from dust and debris. Use a dry cloth for cleaning. Do not use liquids.
• Pengudaraan: Ensure that the ventilation openings are not blocked to allow for proper heat dissipation.
• Pantau Prestasi: Regularly check the LCD display for normal operation and any error codes.

9. Penyelesaian masalah

If you encounter issues with your solar charge controller, refer to the following basic troubleshooting steps:

• Tiada Paparan/Tiada Kuasa: Check battery connections and ensure the battery voltage is within the operating range. Verify that the battery is charged.
• Tiada Pengecasan: Check solar panel connections and ensure panels are receiving adequate sunlight. Verify solar panel voltage.
• Beban Tidak Berfungsi: Check load connections and ensure the load is not exceeding the controller's rated current. Verify that the load output is enabled via the controller's settings.
• Kod Ralat: If an error code appears on the LCD, consult the detailed English user manual for specific meanings and solutions.

10. Spesifikasi

11. Waranti dan Sokongan

Untuk maklumat waranti, sokongan teknikal atau pertanyaan perkhidmatan, sila hubungi terus penjual atau pengilang. Simpan resit pembelian anda sebagai bukti pembelian.