1. Arahan Keselamatan
Sentiasa patuhi langkah berjaga-jaga keselamatan asas semasa menggunakan peralatan elektrik untuk mengurangkan risiko kebakaran, kejutan elektrik dan kecederaan diri. Baca semua arahan sebelum mengendalikan produk ini.
- Keselamatan Kawasan Kerja: Keep your work area clean and well-lit. Cluttered or dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes. Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
- Keselamatan Elektrik: Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
- Keselamatan Diri: Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury. Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
- Penggunaan dan Penjagaan Alat Kuasa: Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
- Penggunaan dan Penjagaan Alat Bateri: Isi semula hanya dengan pengecas yang ditentukan oleh pengilang. Pengecas yang sesuai untuk satu jenis pek bateri boleh menimbulkan risiko kebakaran apabila digunakan dengan pek bateri yang lain. Gunakan alatan kuasa hanya dengan pek bateri yang ditetapkan secara khusus. Penggunaan mana-mana pek bateri lain boleh menyebabkan risiko kecederaan dan kebakaran.
2. Produk Lebihview
The KIMO Cordless Impact Wrench QM-3609 is designed for efficient fastening and loosening tasks, offering powerful performance and versatile features.
Ciri-ciri Utama:
- High Torque & Brushless Motor: Delivers a maximum torque of 400 N·m, significantly improving work efficiency. Equipped with a powerful brushless motor for stable, efficient operation and extended tool life.
- Variable Speed & Forward/Reverse Rotation: Features stepless speed adjustment from 0-2600 rpm (min-1) based on trigger pressure. Includes two speed modes: High-efficiency (0-2600rpm) and Power-saving (0-1600rpm). A convenient forward/reverse switch allows for easy change of rotation direction.
- Tiga Mod Operasi: Easily switch between Auto-stop mode, High-efficiency mode, and Power-saving mode with a single button. The Auto-stop mode prevents nuts from flying off when loosening.
- Large Capacity Battery & LED Light: Comes with a high-performance 2000mAh lithium battery that fully charges in 90 minutes, supporting long working hours. A 4-stage LED indicator displays battery status. An integrated LED light illuminates the work area for use in dark conditions.
- Comprehensive Accessories & Versatile Applications: Includes the main unit, 2000mAh battery, rapid charger, extension adapter, storage bag, 3-inch extension rod, and 7 sockets (8/10/12/14/17/19/21mm). Suitable for various tasks such as car repair, tire changes, home maintenance, furniture assembly, DIY projects, and stage construction.
Komponen Produk:
The image above displays the KIMO Cordless Impact Wrench QM-3609 along with its standard accessories, including the battery, charger, various sockets, and a carrying bag.
3. Persediaan
3.1 Pemasangan dan Pengecasan Bateri
- Mengecas Bateri: Connect the rapid charger to a power outlet. Insert the 2000mAh lithium battery into the charger. The LED indicators on the battery will show the charging progress. A full charge typically takes 90 minutes.
- Memasang Bateri: Align the charged battery pack with the base of the impact wrench. Slide the battery into place until it clicks securely. Ensure it is firmly seated to prevent accidental detachment during operation.
- Memeriksa Tahap Bateri: Press the battery verification button on the battery pack. The 4-stage LED display will indicate the remaining power level.
3.2 Memasang Soket
The KIMO Impact Wrench features a 1/2" square drive, compatible with standard sockets. To attach a socket:
- Select the appropriate socket size (e.g., 8mm, 10mm, 12mm, 14mm, 17mm, 19mm, 21mm) for your task.
- Push the socket firmly onto the 1/2" square drive until it locks into place.
- To remove, pull the socket off the drive while pressing the release button (if present).
4. Arahan Operasi
4.1 Power and Torque
The KIMO Impact Wrench provides a maximum torque of 400 N·m and a maximum rotation speed of 2600 rpm, suitable for demanding applications.
4.2 Kawalan Kelajuan Boleh Ubah
The tool features a stepless variable speed trigger. The rotation speed (0-2600 rpm) can be adjusted by varying the pressure applied to the trigger. This allows for precise control depending on the task.
4.3 Putaran Hadapan/Undur
To change the rotation direction, push the forward/reverse switch lever located on both sides of the main unit. Push left for forward rotation (tightening nuts) and right for reverse rotation (loosening nuts). The center position acts as a safety lock, preventing accidental activation.
4.4 Mod Pengendalian
Press the mode switch button on the cordless impact wrench to select one of three operating modes:
- Auto-stop Mode: This mode is active only during reverse rotation. When a nut is significantly loosened, the tool automatically stops, preventing the nut from flying off and reducing the risk of loss or injury.
- High-efficiency Mode: Provides a rotation speed of 0-2600 rpm (min-1). Speed is controlled by the trigger pressure.
- Mod jimat tenaga: Provides a rotation speed of 0-1600 rpm (min-1). This mode helps conserve battery power and is active only during forward rotation.
4.5 Brushless Motor Technology
The QM-3609 is equipped with a powerful brushless motor. This technology offers higher efficiency, better control, and a longer lifespan compared to traditional brushed motors, as it eliminates friction and wear from carbon brushes.
4.6 Video Produk
KIMO Impact Wrench in Use
This video demonstrates the KIMO Impact Wrench in action, showing its effectiveness in loosening and tightening lug nuts on a vehicle wheel.
KIMO Cordless Impact Wrench Features
This video highlights various features of the KIMO Cordless Impact Wrench, including its power, battery, and ease of use for different applications.
5. Penyelenggaraan
Regular maintenance ensures the longevity and optimal performance of your KIMO Impact Wrench.
- Pembersihan: Keep the tool's ventilation openings clean and free from dust and debris. Use a soft, damp kain untuk mengelap bahagian luar. Jangan gunakan bahan kimia yang keras atau pembersih yang kasar.
- Penjagaan Bateri: Store batteries in a cool, dry place away from direct sunlight and extreme temperatures. Do not store fully discharged batteries for extended periods. Charge them periodically if not in use.
- Pemeriksaan Aksesori: Regularly inspect sockets and other accessories for wear or damage. Replace worn or damaged accessories to ensure safe and effective operation.
- Storan: When not in use, store the impact wrench and its accessories in the provided storage bag in a dry, secure location out of reach of children.
6. Penyelesaian masalah
If you encounter issues with your KIMO Impact Wrench, refer to the following common problems and solutions:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Alat tidak bermula. | Bateri tidak dicas atau tidak dipasang dengan betul. | Pastikan bateri dicas sepenuhnya dan dimasukkan dengan selamat. |
| Mengurangkan kuasa atau tork. | Low battery charge; incorrect mode selected. | Recharge battery; switch to High-efficiency mode if more power is needed. |
| Soket tidak dipasang dengan selamat. | Debris in drive; worn socket or drive. | Clean the drive; replace worn components. |
| Alat menjadi terlalu panas. | Prolonged heavy use; blocked ventilation. | Allow tool to cool down; clear ventilation openings. |
If the problem persists after attempting these solutions, please contact KIMO customer support.
7. Spesifikasi
| Ciri | Spesifikasi |
|---|---|
| Jenama | KIMO |
| Nombor Model | QM-3609 |
| Max Torque | 400 N·m |
| Kelajuan Putaran Maks | 2600 rpm |
| Sumber Kuasa | Dikuasakan Bateri |
| Voltage | 20 Volt (DC) |
| Jenis Bateri | Litium-ion |
| Kapasiti Bateri | 2000mAh |
| Berat Barang | 3.07 Kilogram |
| Dimensi Pakej | 29.4 x 18.4 x 17.2 cm |
| Gaya Kepala | Dataran Tetap |
8. Waranti & Sokongan
For warranty information, technical support, or service inquiries regarding your KIMO Cordless Impact Wrench QM-3609, please refer to the documentation included with your product or visit the official KIMO webtapak. Simpan resit pembelian anda sebagai bukti pembelian.
Anda juga boleh melawat KIMO Store on Amazon untuk maklumat lanjut dan sokongan produk.