1. Pengenalan
The DIGITEN TTC-1003 is a versatile 3-stage outlet temperature controller designed for precise environmental management. It features two temperature-controlled outlets and one timer-controlled outlet, allowing for independent regulation of heating, cooling, and lighting cycles. This device is suitable for a wide range of applications, including reptile habitats, incubators, greenhouses, mushroom cultivation, and home brewing. This manual provides detailed instructions for the safe and effective operation of your TTC-1003 controller.
Figure 1: DIGITEN TTC-1003 Temperature Controller
2. Maklumat Keselamatan
Sila baca dan fahami semua arahan keselamatan sebelum mengendalikan peranti ini. Kegagalan mematuhi arahan ini boleh mengakibatkan renjatan elektrik, kebakaran atau kerosakan pada produk.
- Pastikan bekalan kuasa voltage matches the specifications of the controller (100-240V AC).
- Do not immerse the main controller unit in water or expose it to excessive moisture. The temperature probes are waterproof, but the main unit is not.
- Sentiasa cabut plag peranti daripada salur keluar kuasa sebelum membersihkan atau melakukan sebarang penyelenggaraan.
- Do not exceed the maximum rated current of 15A for the entire unit.
- Jauhkan peranti daripada kanak-kanak dan haiwan peliharaan.
- Do not disassemble or modify the controller. Refer all servicing to qualified personnel.
- Ensure all connected appliances are in good working condition and do not exceed the controller's wattage had.
3. Produk Lebihview
3.1 Komponen
- DIGITEN TTC-1003 Controller Unit
- 2 x Temperature Sensor Probes (2m / 78.74in each)
- Power Cord (1.4m / 55.12in)
3.2 Ciri-ciri Utama
- Mudah Digunakan: Plug-and-play design with a large LCD display.
- Kawalan Bebas: Two temperature-controlled outlets (OUT1, OUT2) and one timer-controlled outlet (OUT3) operate independently.
- Julat Suhu Luas: Regulates and maintains temperatures from 14°F to 248°F (-10°C to 120°C).
- Dual Sensor Probes: Two probes for reliable temperature tracking.
- Kawalan Suhu Siang/Malam: Allows for different temperature settings for day and night cycles on temperature-controlled outlets.
- Fungsi Masa: Outlet 3 offers a time cycle function for lighting or other timed devices.
- Fungsi Memori: All settings are saved in the event of a power outage.
- Suis Unit Suhu: Tukar dengan mudah antara Celsius (°C) dan Fahrenheit (°F).
- Penggera Suhu Tinggi/Rendah: Provides alerts for temperature deviations.
Figure 2: Key Features of the TTC-1003
4. Arahan Persediaan
4.1 Penempatan Awal
- Choose a dry, stable location for the controller unit, away from direct sunlight or heat sources.
- The unit can be wall-mounted using the integrated hanging slot on the back.
Figure 3: Wall-Mounted Installation
4.2 Connecting Probes and Devices
- Plug the two temperature sensor probes into the designated ports on the top of the controller.
- Position the sensor probes in the environment where temperature monitoring is required. Ensure they are not directly exposed to heating elements or water if not intended.
- Plug your heating or cooling devices into OUT1 and OUT2. These outlets are temperature-controlled.
- Plug your lighting or other timed devices into OUT3. This outlet is timer-controlled.
- Plug the controller's power cord into a standard electrical outlet. The LCD display will illuminate.
Gambar 4: Cthample Applications and Connections
5. Arahan Operasi
The controller features a large LCD display and three buttons: SET, JAM, dan Anak panah ATAS/BAWAH.
5.1 Menetapkan Masa Semasa
- Tekan dan tahan butang JAM button for 3 seconds until the hour digit flashes.
- Gunakan Anak panah ATAS/BAWAH untuk menyesuaikan jam.
- Tekan JAM again to move to the minute digit, then adjust with Anak panah ATAS/BAWAH.
- Tekan JAM untuk mengesahkan dan keluar.
5.2 Temperature Control (Outlets 1 & 2)
Outlets 1 and 2 are independently controlled for temperature. Each can be set for heating or cooling mode with specific ON/OFF temperatures and operating times.
- Tekan dan tahan butang SET button for 3 seconds to enter programming mode. The display will show 'OUT1' or 'OUT2' and the first setting will flash.
- Gunakan Anak panah ATAS/BAWAH to select 'OUT1' or 'OUT2'. Press SET untuk mengesahkan.
- Tetapkan Masa HIDUP: The 'ON' time will flash. Use Anak panah ATAS/BAWAH untuk menetapkan jam, kemudian tekan SET to set minutes. This is the time when temperature control for this outlet begins.
- Masa Tetapkan: The 'OFF' time will flash. Use Anak panah ATAS/BAWAH untuk menetapkan jam, kemudian tekan SET to set minutes. This is the time when temperature control for this outlet ends.
- Set ON Temperature: The 'ON Temp' will flash. Use Anak panah ATAS/BAWAH to set the temperature at which the connected device turns ON.
- Set OFF Temperature: The 'OFF Temp' will flash. Use Anak panah ATAS/BAWAH to set the temperature at which the connected device turns OFF.
- Determine Mode (Heating/Cooling):
- If ON Temp < OFF Temp: The controller operates in Mod Pemanasan. The device turns on when the temperature drops to ON Temp and turns off when it reaches OFF Temp.
- If ON Temp > OFF Temp: The controller operates in Mod Penyejukan. The device turns on when the temperature rises to ON Temp and turns off when it reaches OFF Temp.
- Tekan SET to cycle through additional settings (High Alarm, Low Alarm, Calibration) or press JAM untuk menyimpan dan keluar.
Figure 5: Temperature Control Programming Example
5.3 Timer Control (Outlet 3)
Outlet 3 operates as a simple timer, allowing for two independent ON/OFF periods within a 24-hour cycle.
- Tekan dan tahan butang SET button for 3 seconds to enter programming mode.
- Gunakan Anak panah ATAS/BAWAH to select 'OUT3'. Press SET untuk mengesahkan.
- Set First ON Time: The 'ON' time for the first period will flash. Adjust with Anak panah ATAS/BAWAH dan sahkan dengan SET.
- Set First OFF Time: The 'OFF' time for the first period will flash. Adjust with Anak panah ATAS/BAWAH dan sahkan dengan SET.
- Ulangi langkah untuk Second ON Time dan Second OFF Time if a second timed period is desired. If not, set the second ON time to be the same as the second OFF time to disable it.
- Tekan JAM untuk menyimpan dan keluar.
Figure 6: Timer Control Programming Example for Outlet 3
5.4 Pemilihan Unit Suhu (°C/°F)
To switch between Celsius and Fahrenheit, briefly press the Anak panah KE ATAS button while in normal operating mode.
5.5 High/Low Temperature Alarms (AH/AL)
You can set high and low temperature alarms for Outlets 1 and 2 to be notified if the temperature goes outside your desired range.
- Enter programming mode for OUT1 or OUT2 (as described in 5.2).
- After setting ON/OFF temperatures, press SET until 'AH' (High Alarm) flashes. Use Anak panah ATAS/BAWAH to set the desired high temperature limit.
- Tekan SET until 'AL' (Low Alarm) flashes. Use Anak panah ATAS/BAWAH to set the desired low temperature limit.
- Tekan JAM untuk menyimpan dan keluar.
6. Penyelenggaraan
Regular maintenance ensures the longevity and accuracy of your DIGITEN TTC-1003 controller.
- Pembersihan: Wipe the controller unit with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the unit is unplugged before cleaning.
- Penjagaan Probe: Periodically inspect the temperature probes for any signs of damage or wear. Ensure the probes are clean for accurate readings. The probes are waterproof and can be cleaned with a damp kain.
- Storan: If storing the device for an extended period, unplug it and store it in a cool, dry place.
Figure 7: Waterproof Temperature Probe
7. Penyelesaian masalah
If you encounter issues with your controller, refer to the table below for common problems and solutions.
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Paparan kosong atau tidak dihidupkan. | Tiada bekalan kuasa. | Check if the controller is properly plugged into a live outlet. Verify the power outlet is functional. |
| Heating/Cooling device (OUT1/OUT2) not turning on/off. | Incorrect temperature settings (ON Temp/OFF Temp). Incorrect time period settings. Kerosakan peranti. | Review and adjust ON/OFF temperatures and time periods. Ensure the ON/OFF temperatures are set correctly for heating (ON < OFF) or cooling (ON > OFF). Test the connected device directly in a wall outlet. |
| Timed device (OUT3) not turning on/off. | Incorrect ON/OFF times for OUT3. | Verify the programmed ON/OFF times for Outlet 3. Ensure the current time on the controller is accurate. |
| Temperature readings are inaccurate. | Probe placement or damage. Penentukuran diperlukan. | Ensure probes are correctly positioned and not directly touching heating elements. Check probes for visible damage. Use the calibration setting (refer to section 5.5) to adjust the temperature reading if necessary (within +/- 12°F). Note that readings are typically accurate within 1-2°F. |
| Tetapan hilang selepas kuasa terputustage. | This should not occur as the device has memory backup. | If settings are consistently lost, contact customer support. |
8. Spesifikasi
| Ciri | Perincian |
|---|---|
| Nama Model | TTC-1003 |
| Jenama | DIGITEN |
| Julat Kawalan Suhu | 14°F ~ 248°F (-10°C ~ 120°C) |
| Voltage | 100-240V AC |
| Nilai Semasa | 15A Maks |
| Wattage | 2200W |
| Jenis Paparan | LCD dengan Lampu Latar |
| Jenis Kawalan | Butang Tekan |
| Teknologi Ketersambungan | Pra-wayar |
| Berat Barang | 1.03 paun (lebih kurang 0.47 kg) |
| Dimensi Pakej | 6.54 x 6.34 x 2.05 inci |
9. Waranti dan Sokongan
9.1 Waranti Produk
DIGITEN provides a one-year warranty for any quality problems with this product. Please retain your proof of purchase for warranty claims.
9.2 Sokongan Pelanggan
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact DIGITEN customer support. You can find contact information and additional resources by visiting the official DIGITEN store: