HiTauing 200W Aquarium Heater Instruction Manual

1. Produk Lebihview

The HiTauing 200W Aquarium Heater is designed to maintain a warm and stable environment for your aquatic pets. This submersible heater features a digital display for precise temperature control and multiple safety mechanisms.

This 200W aquarium heater is intended exclusively for indoor aquarium use and heating. Ensure no part of the heater is covered by filter material or debris to prevent malfunctions.

Imej 1.1: HiTauing 200W Aquarium Heater with external temperature controller.

2. Amaran Keselamatan

Please read all safety warnings carefully before use to prevent injury or product damage.

• Before powering on, inspect the product for any damage. If any damage is found, discontinue use immediately and contact customer support.
• The submersible aquarium heater must be fully submerged in water. The temperature controller unit is not submersible and must not be placed in water.
• Do not disassemble the aquarium heater or make structural modifications. This can lead to product damage and potential injury.
• When cleaning or performing maintenance on the aquarium heater, always disconnect power for 5 to 10 minutes before removing it from the water.
• Ensure the heater is securely installed using the provided suction cups to prevent it from detaching and potentially causing issues.
• This heater is designed for aquariums between 20 to 40 gallons. Using it in tanks outside this range may affect performance.

Imej 2.1: Diagram illustrating the 6-point safety system, including quartz glass, anti-scald shell, overheat protection, and low water level warning.

3. Arahan Persediaan

1. Buka bungkusan dan Periksa: Carefully remove the heater and controller from the packaging. Inspect all components for any signs of damage.
2. Letakkan Pemanas: Place the submersible heater fully inside your aquarium. Ensure it is positioned vertically or horizontally, completely covered by water. Avoid placing it directly in the substrate or near strong water flow that could dislodge it.
3. Selamatkan dengan Cawan Sedutan: Use the two provided suction cups to firmly attach the heater to the inner wall of the aquarium. This prevents movement and ensures stable operation.
4. Letakkan Pengawal: Mount the external temperature controller in a dry location, away from water splashes. The controller unit is not waterproof.
5. Sambungkan Kuasa: Plug the heater's power cord into a suitable electrical outlet (220V AC).

Imej 3.1: Examples of correct (fully submerged) and incorrect (partially submerged or out of water) heater installations.

4. Arahan Operasi

The HiTauing aquarium heater features a digital display temperature control system for real-time water temperature monitoring and adjustment.

• Hidupkan kuasa: Once plugged in, the digital display on the controller will illuminate.
• Paparan suhu: The display shows the current water temperature and the set temperature.
• Melaraskan Suhu: The adjustable temperature range is 17 °C to 34 °C (64 °F to 93 °F). Press the temperature setting button to adjust the desired temperature. Each press adjusts the temperature by ± 1 °F/°C.
• Unit Penukaran (°F/°C): Press and hold the temperature setting button for 3 seconds to switch between Fahrenheit (°F) and Celsius (°C).
• Penunjuk Pemanasan: A red light on the controller indicates that the heater is actively heating the water.
• Constant Temperature Indicator: A green light on the controller indicates that the heater has reached the set temperature and is maintaining it.
• Pemanasan Cepat: The heater utilizes a high-quality nichrome alloy electric heating wire for efficient and consistent temperature maintenance, reaching the set temperature within minutes. Heating automatically stops once the set temperature is achieved and resumes if the temperature drops.

Imej 4.1: Diagram detailing the digital display, temperature control button, and heating/constant temperature indicators.

5. Penyelenggaraan

• Pembersihan tetap: Over time, algae and mineral deposits may accumulate on the heater. To clean, disconnect the heater from power for 5-10 minutes, then carefully remove it from the aquarium. Gently wipe the heater surface with a soft cloth or sponge. Do not use abrasive cleaners or harsh chemicals.
• Semak Kerosakan: Periodically inspect the heater and power cord for any signs of wear, cracks, or damage. If any damage is observed, discontinue use and replace the unit.
• Suction Cup Inspection: Ensure the suction cups remain firmly attached to the aquarium wall. Replace them if they lose their grip.

6. Penyelesaian masalah

• Kod Ralat E1: If the temperature control system displays an "E1" error code, it indicates that the submersible heater is not fully submerged in water. Immediately unplug the heater, ensure it is completely underwater, and then plug it back in.
• Pemanas Tidak Memanaskan:
  • Periksa sama ada kord kuasa dipasang dengan selamat ke dalam salur keluar.
  • Verify that the set temperature is higher than the current water temperature.
  • Pastikan pemanas terendam sepenuhnya.
  • Check for any visible damage to the heater or controller.
• Turun naik suhu:
  • Ensure the heater is appropriately sized for your aquarium volume (200W for 20-40 gallons).
  • Check for strong drafts or external temperature changes affecting the aquarium.
  • Ensure no filter material or debris is covering the heater, which can impede heat distribution.

7. Spesifikasi

Imej 7.1: Chart showing different heater powers, lengths, and recommended tank sizes.

8. Waranti & Sokongan

As a brand seller, our primary goal is to provide high-quality products and support your purchase. We offer a Perkhidmatan jaminan 2 tahun dari tarikh pembelian.

Should you encounter any issues with your HiTauing 200W aquarium heater, please do not hesitate to contact us for assistance. Our customer support team is dedicated to helping you resolve any problems.