NutriBullet GO Cordless Blender Instruction Manual

pengenalan

The NutriBullet GO Cordless Blender is designed for convenience and portability, allowing you to prepare smoothies and protein shakes on the go. This manual provides essential information for safe and effective use of your appliance.

Perlindungan Penting

Sentiasa ikuti langkah berjaga-jaga keselamatan asas apabila menggunakan peralatan elektrik untuk mengurangkan risiko kebakaran, renjatan elektrik, kecederaan atau kerosakan harta benda.

• Read all instructions before operating the NutriBullet GO.
• Jauhkan perkakas dan kordnya daripada jangkauan kanak-kanak.
• Jangan rendam tapak motor di dalam air atau sebarang cecair lain.
• Avoid contact with moving parts. Keep hands and utensils out of the blending cup while blending to prevent injury.
• Jangan campurkan cecair panas, kerana pengumpulan tekanan boleh menyebabkan cawan pecah.
• Ensure the blade assembly is securely attached to the cup and the cup is properly locked onto the motor base before operating.
• Do not operate the blender if the blade assembly is damaged or if the motor base has been dropped or damaged.
• Use only NutriBullet authorized accessories and replacement parts.
• Unplug the USB charging cord when not in use and before cleaning.

Apa yang Termasuk

Your NutriBullet GO Cordless Blender package includes:

• (1) Motor Base
• (2) 13oz Cups
• (2) To Go Lids
• (1) Blade Cover
• (1) Kord Pengecas USB
• User Guide with Recipes

Image: All components included with the NutriBullet GO Cordless Blender.

Persediaan

Mengecas Bateri

1. Connect the USB charging cord to the charging port on the motor base.
2. Plug the other end of the USB cord into a compatible USB power adapter (not included).
3. The indicator light will illuminate during charging. A full charge provides up to 20 blending cycles.

Image: The motor base of the NutriBullet GO Cordless Blender, illustrating the power button and indicator light.

Perhimpunan

1. Ensure the motor base is fully charged.
2. Fill the 13oz cup with your desired ingredients. Do not exceed the MAX fill line.
3. Securely twist the blade assembly onto the cup until it is tightly sealed.
4. Invert the cup and blade assembly, then align it with the motor base. Twist clockwise until it locks into place.

Arahan Operasi

Mengadun

1. After assembly, press the power button on the motor base to begin blending.
2. The blender will run for a preset cycle. For optimal results, blend in short bursts.
3. Avoid blending continuously for more than 30 seconds to prevent overheating.
4. If the blender stops, gently shake the unit to redistribute ingredients and restart.

Image: The NutriBullet GO Cordless Blender with ingredients inside, demonstrating its use.

Selepas Blending

1. Once blending is complete, twist the cup counter-clockwise to remove it from the motor base.
2. Carefully unscrew the blade assembly from the cup.
3. Attach a To-Go Lid for immediate consumption or storage.

Video: A demonstration of how to use the NutriBullet GO Cordless Blender, including assembly and blending.

Penyelenggaraan dan Pembersihan

Cleaning the Blade and Cups

1. Immediately after each use, rinse the blade assembly and cups with warm water and mild soap.
2. Gunakan berus untuk membersihkan di sekeliling bilah dengan berhati-hati.
3. The cups and lids are top-rack dishwasher safe.

Membersihkan Pangkalan Motor

1. Lap tapak motor dengan iklanamp kain.
2. Jangan sekali-kali merendam tapak motor di dalam air atau sebarang cecair lain.
3. Pastikan port pengecasan kering sebelum mengecas.

Menyelesaikan masalah

Pengisar tidak dihidupkan:

• Ensure the motor base is fully charged.
• Verify the cup and blade assembly are securely twisted onto the motor base. The blender has a safety mechanism that prevents operation if not properly assembled.

Bahan-bahan tidak sebati dengan lancar:

• Tambah lebih banyak cecair ke dalam campuran.
• Potong bahan yang lebih besar kepada kepingan yang lebih kecil.
• Do not overfill the cup beyond the MAX line.
• Blend in shorter bursts and gently shake the unit.

Indicator light is red:

• This may indicate overheating. Allow the unit to cool down for at least 15 minutes before attempting to blend again.
• It could also indicate a low battery. Recharge the unit.

Spesifikasi

Maklumat Waranti

The NutriBullet GO Cordless Blender comes with a limited warranty. Please refer to the warranty card included in your package or visit the official NutriBullet webtapak untuk terma dan syarat terperinci. Simpan bukti pembelian anda untuk tuntutan waranti.

Sokongan Pelanggan

For further assistance, product registration, or to purchase accessories, please visit the official NutriBullet webtapak atau hubungi perkhidmatan pelanggan.

rasmi Webtapak: www.nutribullet.com