Cxy T18

Manual Pengguna Bank Kuasa Pemula Jump Starter Cxy T18

Model: T18 | Brand: Cxy

pengenalan

The Cxy T18 Jump Starter Power Bank is a versatile device designed to provide emergency jump-starting for 12V vehicles, including cars, motorcycles, boats, and more, with up to 6L gas or 3.0L diesel engines. It also functions as a portable power bank for charging electronic devices and features an integrated LED flashlight for various lighting needs.

Kandungan Pakej

Sila semak kandungan pakej semasa membuka kotak untuk memastikan semua item ada:

Cxy T18 Jump Starter Power Bank
12V Smart Battery Clamp
Kabel USB-C
Kabel C ke C
Manual Pengguna

Cxy T18 Jump Starter Package Contents — Image: Contents of the Cxy T18 Jump Starter package, including the jump starter unit, smart battery clamps, USB cables, and user manual.

Spesifikasi

Ciri	Spesifikasi
Arus Puncak	1000 Amps
Kapasiti Bateri	12800mAh
Keserasian Kenderaan	12V vehicles (up to 6L Gas / 3.0L Diesel engines)
Lompat Bermula setiap Caj	Up to 25 times (when fully charged)
Paparan	Digital LED Screen (3-inch)
Keluaran USB 1	Quick Charge (18W)
Keluaran USB 2	Output USB Standard
Mod Lampu LED	SOS, Spotlight, Strobe
Dimensi	22 x 9 x 5 cm
Berat badan	1.36 Kilogram

Maklumat Keselamatan

Always observe the following safety precautions when using the Cxy T18 Jump Starter:

Read the entire user manual before first use.
Pastikan pemula lompat dicas sepenuhnya sebelum digunakan.
Do not attempt to jump start vehicles with voltage selain 12V.
Sambungkan clamps correctly: Red to positive (+), Black to negative (-). Incorrect connection can cause damage.
Jangan sentuh cl merah dan hitamampbersama-sama.
Jauhkan daripada kanak-kanak.
Jangan dedahkan peranti kepada suhu yang melampau, cahaya matahari langsung atau air.
Jika peranti menjadi terlalu panas semasa digunakan, putuskan sambungannya dengan segera.
The smart battery clamp includes over 10 types of protection, including reverse polarity, spark-proof, overcharge, high/low temperature, over-voltage, overload, over-current, and short circuit protection.

Pintar Clamps Protections — Image: Diagram illustrating the various safety protections integrated into the smart battery clamps, such as reverse polarity, spark-proof, and overcharge protection.

Persediaan dan Pengecasan

Pengecasan Awal

Before first use, fully charge the Cxy T18 Jump Starter. Use the provided USB-C cable to connect the jump starter to a USB power adapter (not included). The digital LED screen will display the charging status and battery percentage. Charging is complete when the screen shows 100%.

Memahami Paparan Digital

The 3-inch digital LED screen provides real-time information:

Tahap Bateri: Menunjukkan baki peratusan bateritage.
Output Discharge (OUT): Indicates when the device is discharging power.
Input Charge (IN): Indicates when the device is being charged.
SEDIA: Appears when the device is ready to jump start a vehicle.
Ikon Amaran:
- Terlalu Panas
- Bateri Rendah
- Clamps Reversely (Incorrect connection)

Comprehensive Digital Display — Image: Close-up of the Cxy T18's digital display, showing battery level, charge/discharge indicators, "READY" status, and various warning icons.

Arahan Pengendalian: Menghidupkan Kenderaan Secara Langsung

Ikuti langkah-langkah ini untuk menghidupkan kenderaan anda dengan selamat:

Sambungkan Clamp to the Jump Starter: Masukkan cl bateri pintaramp cable into the "Car Jump Start Output" port on the jump starter. Ensure it is firmly connected. The display should show "READY".
Image: Step 1 - Connecting the smart battery clamp to the jump starter unit.
Sambungkan Clamp to the Car Battery:
- Lampirkan MERAH (+) clamp ke terminal positif bateri kenderaan anda.
- Lampirkan HITAM (-) clamp ke terminal negatif bateri kenderaan anda.
Ensure a secure connection. The jump starter's display should indicate "READY" if connections are correct and safe. If any error icons appear, check connections and battery status.
Image: The Cxy T18 Jump Starter connected to a car battery, showing the correct positive (red) and negative (black) clamp sambungan.
Start Your Engine: Once the jump starter shows "READY", return to your vehicle and attempt to start the engine. If the engine does not start on the first attempt, wait at least 30 seconds before trying again.
Image: Step 3 - A hand pressing the engine start button in a vehicle after connecting the jump starter.
Remove and Go: Sebaik sahaja enjin dihidupkan, segera tanggalkan kabel hitam (-)amp from the car battery, then disconnect the red (+) clamp. Finally, remove the smart battery clamp cable from the jump starter. Store the jump starter in a safe place.

Image: Step 4 - A hand removing the battery clamps from the car battery after a successful jump start.

Cara Menggunakan Pemula Lompat — Image: A visual guide demonstrating the four steps to use the Cxy T18 Jump Starter: connect to jump starter, connect to car battery, start engine, and remove clamps.

Multifunction Features

Fungsi Power Bank

The Cxy T18 can charge your electronic devices. It features two USB-A output ports: one Quick Charge (18W) and one standard USB output. Simply connect your smartphone, tablet, or other USB-powered devices using their respective USB cables.

Lampu suluh LED

The integrated LED flashlight offers three modes for various situations:

Tumpuan: Untuk pencahayaan umum.
Mod SOS: Emits a Morse code SOS signal for emergencies.
Mod Strob: Provides a flashing light for signaling or warning.

To activate the flashlight, press the dedicated LED Light button. Press again to cycle through modes.

Mod Lampu Suluh LED — Image: The Cxy T18 Jump Starter with its LED flashlight activated, demonstrating its use for emergency lighting, night walking, and rescue lighting.

Penyelenggaraan

Storan: Simpan starter lompat di tempat yang sejuk dan kering jauh dari cahaya matahari langsung dan kelembapan.
mengecas: For optimal battery life, recharge the unit every 3-6 months, even if not used, to maintain its charge level.
Pembersihan: Lap peranti dengan kain lembut dan kering. Jangan gunakan bahan kimia yang keras atau pembersih yang kasar.
Clamp Penjagaan: After each use, inspect the clamps for any damage or corrosion. Clean them if necessary.

Menyelesaikan masalah

Masalah	Kemungkinan Punca	Penyelesaian
Peranti tidak dihidupkan.	Bateri telah kehabisan sepenuhnya.	Cas peranti sepenuhnya.
"Clamps Reversely" warning on display.	Clamps disambungkan ke terminal bateri yang salah.	Putuskan sambungan clamps and re-connect Red to positive (+), Black to negative (-).
Kenderaan tidak bermula selepas percubaan melompat.	Jump starter battery low; vehicle battery severely discharged; other vehicle issues.	Ensure jump starter is fully charged. Wait 30 seconds and try again. If still no start, consult a mechanic.
"Over Heat" warning.	Device has overheated due to prolonged use or high ambient temperature.	Disconnect the device and allow it to cool down before attempting further use.
Pengecasan USB tidak berfungsi.	Device battery low; incorrect cable; device not activated for charging.	Check battery level. Ensure cable is properly connected. Some devices may require pressing the power button to initiate USB output.

What if the Car Flameout? — Image: Scenarios where the Cxy T18 Jump Starter can be useful, such as a car laid idle for a long time, battery aging, or voltage insufficient, preventing the need to push the car or borrow power.

Waranti dan Sokongan

Cxy offers a 24-month warranty and lifetime expert technical support for the T18 Jump Starter Power Bank. For any issues or inquiries, please contact Cxy customer service.

Please refer to the contact information provided in your product packaging or visit the official Cxy webtapak untuk sokongan.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.