Solaxx CLGE40

Solaxx CLGE40 Resilience E Series 40K Gal All-in-1 User Manual

Model: CLGE40

1. Pengenalan

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Solaxx CLGE40 Resilience E Series 40K Gal All-in-1 system. Please read this manual thoroughly before attempting to install or operate the unit to ensure safe and efficient use.

The Solaxx CLGE40 is designed to provide efficient water treatment for pools up to 40,000 gallons, integrating multiple functions into a single, compact unit.

2. Maklumat Keselamatan

Always observe the following safety precautions to reduce the risk of injury, electric shock, fire, or damage to the unit.

  • Keselamatan Elektrik: Ensure the unit is connected to a properly grounded outlet. Do not operate with damaged cords or plugs. Disconnect power before servicing.
  • Pengendalian kimia: Follow all manufacturer's instructions for handling pool chemicals. Avoid direct contact with skin and eyes.
  • Pemasangan: Pemasangan mesti dilakukan oleh profesional yang berkelayakan mengikut semua kod elektrik dan paip tempatan dan kebangsaan.
  • Kualiti Air: Maintain proper water chemistry as specified in this manual to ensure optimal performance and longevity of the unit.
  • Kanak-kanak dan Haiwan Kesayangan: Jauhkan kanak-kanak dan haiwan peliharaan daripada unit semasa operasi dan penyelenggaraan.

3. Produk Lebihview

Depan view of the Solaxx CLGE40 Resilience E Series 40K Gal All-in-1 unit, showing the control panel and main housing.

Rajah 3.1: Depan view of the Solaxx CLGE40 Resilience E Series 40K Gal All-in-1 unit. This image displays the main body of the unit, including the control panel with various indicators and buttons, and the transparent cell housing below.

bersudut view of the Solaxx CLGE40 Resilience E Series 40K Gal All-in-1 unit, highlighting the transparent cell and connection points.

Rajah 3.2: Bersudut view of the Solaxx CLGE40 Resilience E Series 40K Gal All-in-1 unit. This perspective provides a clearer view of the transparent cell, which allows for visual inspection, and the plumbing connection points on either side.

The CLGE40 system integrates a salt chlorine generator with advanced control features. Key components include the control unit, the electrolytic cell, and various sensors for optimal performance.

4. Persediaan dan Pemasangan

4.1 Senarai Semak Pra-Pemasangan

  • Sahkan semua komponen ada dan tidak rosak.
  • Ensure adequate space for installation and maintenance.
  • Confirm power supply meets unit requirements (refer to specifications).
  • Have necessary plumbing tools and materials ready.

4.2 Pemasangan Paip

  1. Select an appropriate location in the return line after the filter and heater.
  2. Cut the existing PVC pipe and install the provided unions.
  3. Securely attach the electrolytic cell to the unions, ensuring proper flow direction as indicated on the cell.
  4. Apply PVC cement to all connections for a watertight seal. Allow adequate curing time.

4.3 Sambungan Elektrik

  1. Pastikan kuasa DIMATIKAN pada pemutus litar.
  2. Connect the control unit to a dedicated, grounded electrical outlet or circuit as per local electrical codes.
  3. Connect the cell cable to the control unit.
  4. Do not restore power until all connections are secure and the system is filled with water.

5. Arahan Operasi

5.1 Permulaan Awal

  1. Ensure pool water chemistry is balanced (pH, alkalinity, calcium hardness).
  2. Add pool salt to achieve the recommended salinity level (typically 3000-3500 ppm). Allow salt to dissolve completely.
  3. Hidupkan pam kolam.
  4. Restore power to the Solaxx CLGE40 unit.
  5. Press the "ON/OFF" button to activate the unit.

5.2 Adjusting Chlorine Output

The unit features an adjustable output level to control chlorine production. Use the "+" and "-" buttons on the control panel to increase or decrease the output percentage. Monitor your pool's free chlorine level and adjust as needed to maintain desired sanitation.

5.3 Lampu Penunjuk

  • HIDUP/MATI: Menunjukkan status kuasa.
  • PENGELUARAN: Bar graph showing current chlorine production level.
  • GARAM RENDAH: Illuminates when salt level is below optimal. Add salt.
  • TIADA ALIRAN: Indicates insufficient water flow through the cell. Check pump and plumbing.
  • AIR SEJUK: Illuminates if water temperature is too low for efficient operation.
  • CLEAN CELL: Indicates the cell requires cleaning.
  • CELL LIFE LOW: Indicates the electrolytic cell is nearing the end of its lifespan and may need replacement soon.

6. Penyelenggaraan

6.1 Pembersihan Sel

The electrolytic cell may accumulate scale deposits over time, reducing efficiency. The "CLEAN CELL" indicator will illuminate when cleaning is required.

  1. Turn off the unit and pool pump, and disconnect power.
  2. Remove the electrolytic cell from the plumbing.
  3. Prepare a cleaning solution of 1 part muriatic acid to 4 parts water in a plastic container. Always add acid to water, never water to acid.
  4. Submerge the cell plates in the solution, ensuring the electrical connections remain dry.
  5. Allow to soak until bubbling stops (typically 5-15 minutes). Do not over-soak.
  6. Rinse the cell thoroughly with fresh water.
  7. Reinstall the cell and restore power.

6.2 Musim sejuk

In areas subject to freezing temperatures, the unit must be properly winterized to prevent damage.

  • Putuskan sambungan kuasa ke unit.
  • Drain all water from the electrolytic cell and plumbing lines connected to the unit.
  • Remove the cell and store it in a dry, temperature-controlled environment.

7. Penyelesaian masalah

MasalahKemungkinan PuncaPenyelesaian
"LOW SALT" indicator onLow salt level in pool water.Test salt level and add salt as needed. Allow time for dissolution.
"NO FLOW" indicator onInsufficient water flow through cell.Check pool pump operation, filter cleanliness, and ensure valves are open.
"CLEAN CELL" indicator onScale buildup on cell plates.Clean the electrolytic cell as per Section 6.1.
Low chlorine outputLow salt, dirty cell, low water temperature, or incorrect output setting.Check salt level, clean cell, ensure water temperature is adequate, increase output setting.
Unit tidak dihidupkanNo power supply, tripped breaker, or faulty connection.Check power outlet, reset circuit breaker, ensure all electrical connections are secure.

8. Spesifikasi

  • model: CLGE40 Resilience E Series
  • Saiz Kolam Maksimum: 40,000 gelen
  • Pengeluar: Solaxx
  • Dimensi Pakej: 12 x 12 x 8 inci
  • ASIN: B0B96WPR34
  • Recommended Salt Level: 3000-3500 ppm

Catatan: Spesifikasi boleh berubah tanpa notis.

9. Waranti dan Sokongan

For warranty information, please refer to the warranty card included with your product or visit the official Solaxx webtapak. Simpan bukti pembelian anda untuk tuntutan waranti.

For technical support, troubleshooting assistance, or to order replacement parts, please contact Solaxx Customer Service:

When contacting support, please have your product model number (CLGE40) and serial number ready.

© 2024 Solaxx. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.