GRAPHITE Energy+ 18V 2-in-1 Pole Saw and Hedge Trimmer User Manual

pengenalan

The GRAPHITE Energy+ 18V 2-in-1 Pole Saw and Hedge Trimmer (Model 58G098) is a versatile garden tool designed for efficient pruning and trimming tasks. This cordless device operates on the GRAPHITE Energy+ 18V Lithium-Ion battery system (battery not included). It combines the functionality of a pole saw for cutting branches and a hedge trimmer for shaping hedges and shrubs, offering extended reach for higher areas.

Maklumat Keselamatan

Sentiasa baca dan fahami semua amaran keselamatan, arahan, ilustrasi dan spesifikasi yang disediakan dengan alat kuasa ini. Kegagalan mematuhi semua arahan yang disenaraikan di bawah boleh mengakibatkan renjatan elektrik, kebakaran dan/atau kecederaan serius.

• Wear appropriate personal protective equipment (PPE) including safety glasses, gloves, and hearing protection.
• Pastikan kawasan kerja bebas daripada orang ramai, kanak-kanak dan haiwan peliharaan.
• Jangan kendalikan alat ini dalam keadaan basah atau di hadapan cecair atau gas mudah terbakar.
• Sentiasa putuskan sambungan pek bateri sebelum membuat sebarang pelarasan, menukar aksesori atau menyimpan alat.
• Kekalkan cengkaman yang kukuh pada alat dengan kedua-dua tangan semasa operasi.
• Be aware of falling debris when operating the pole saw or hedge trimmer at height.
• Keep hands and feet away from cutting blades and chains.
• Periksa alat ini untuk kerosakan sebelum setiap penggunaan. Jangan gunakan jika rosak.

Kandungan Pakej

Sahkan bahawa semua item ada semasa membongkar:

• GRAPHITE Energy+ 18V 2-in-1 Pole Saw and Hedge Trimmer main unit
• Pole Saw attachment head (8" / 200 mm guide bar)
• Hedge Trimmer attachment head (430 mm cutting width)
• Lengan pemanjangan
• Tali bahu
• Manual Pengguna
• Kad Waranti
• Note: 18V DC Lithium-Ion battery and charger are not included and must be purchased separately.

Persediaan

1. Attaching the Extension Arm

The extension arm allows for increased reach. To attach, align the hexagonal end of the extension arm with the corresponding socket on the main unit. Push firmly until it clicks into place. Ensure the connection is secure.

Figure 1: Extension arm connection point.

Description: This image displays a close-up of the tool's main body and the end of the extension pole, highlighting the hexagonal connection mechanism. The red collar on the tool's body indicates the locking point for the extension.

2. Attaching the Pole Saw Head

To attach the pole saw head, align the drive shaft of the saw head with the coupling on the extension arm (or main unit if not using the extension). Push and twist slightly until the head is fully seated and locked. Ensure the locking mechanism is engaged.

Figure 2: Assembled pole saw and hedge trimmer.

Description: This image shows the complete 2-in-1 tool, with the pole saw attachment on the upper part of the image and the hedge trimmer attachment on the lower part. Both are shown with the extension pole, illustrating the full length of the tool.

3. Attaching the Hedge Trimmer Head

Similar to the pole saw head, align the drive shaft of the hedge trimmer head with the coupling on the extension arm (or main unit). Push and twist slightly until the head is fully seated and locked. Verify the locking mechanism is engaged.

4. Memasang Bateri

Insert a charged GRAPHITE Energy+ 18V Lithium-Ion battery into the battery slot on the handle of the main unit. Push until it clicks into place. To remove, press the release button and pull the battery out.

Arahan Operasi

Operasi Am

• Before starting, ensure the area is clear and you have a stable footing.
• Sentiasa pegang alat dengan kuat dengan kedua-dua tangan.
• To start the tool, press the safety lock-off button and then squeeze the trigger switch. Release the trigger to stop.
• Utilize the shoulder strap for improved balance and reduced fatigue during extended use.

Using the Pole Saw Attachment

The pole saw is designed for cutting branches up to 8 inches (200 mm) in diameter.

1. Pelarasan Ketegangan Rantai: The pole saw features tool-less chain tensioning. Rotate the red knob to adjust chain tension. The chain should be snug but still able to be pulled freely around the guide bar.


Figure 3: Chain tension adjustment knob.

Description: This image provides a close-up view of the pole saw head, specifically highlighting the red, circular knob used for tool-less chain tension adjustment. A small lever is also visible, which is part of the tensioning system.

2. Pelinciran: Ensure the chain oil reservoir is filled before use. The saw chain requires continuous lubrication during operation.

Figure 4: Oil reservoir cap.

Description: This image shows a detailed view of the pole saw's body near the chain, focusing on a small, red cap labeled "MIN" and "MAX", indicating the oil reservoir for chain lubrication.

3. Teknik Memotong: Position the saw head on the branch, allowing the chain to reach full speed before beginning the cut. Make a small undercut first to prevent pinching, then complete the cut from the top.

Using the Hedge Trimmer Attachment

The hedge trimmer is suitable for trimming hedges and shrubs with branches up to 15 mm in diameter.

1. Pelarasan Sudut: The hedge trimmer head can be adjusted to various angles for optimal cutting. Press the red button and rotate the head to the desired angle, then release the button to lock it in place.


Figure 5: Hedge trimmer angle adjustment.

Description: This image focuses on the joint of the hedge trimmer attachment, showing a prominent red button that is used to adjust the cutting angle of the blades.

2. Teknik pemangkasan: Use a sweeping motion to cut through hedges. For thicker branches, make several passes. Avoid forcing the blades through dense material.

Figure 6: Hedge trimmer blades.

Description: This image provides a detailed close-up of the hedge trimmer's cutting blades, showing their sharp, serrated design.

Penyelenggaraan

• Pembersihan: After each use, clean the tool thoroughly. Remove any debris, sawdust, or sap from the cutting attachments. Use a damp cloth for the main unit.
• Blade/Chain Care:
  • For the pole saw chain, ensure it is always sharp and properly tensioned. Replace worn or damaged chains.
  • For the hedge trimmer blades, regularly clean and lubricate them with a light machine oil to prevent rust and ensure smooth operation.
• Storan: Store the tool in a dry, secure place, out of reach of children. Remove the battery pack before storage.
• Penjagaan Bateri: Simpan bateri di tempat yang sejuk dan kering. Jangan simpan bateri yang telah dinyahcas sepenuhnya untuk tempoh yang lama.

Menyelesaikan masalah

Spesifikasi

Waranti dan Sokongan

This GRAPHITE product comes with a 3-year warranty, as stated by the manufacturer. Please refer to the included Warranty Card for detailed terms and conditions.

For technical support, spare parts, or warranty claims, please contact your retailer or the official GRAPHITE service center. Contact information can typically be found on the warranty card or the manufacturer's official webtapak.

For more information about GRAPHITE products and the Energy+ system, visit the official GRAPHITE store: GRAPHITE Store on Amazon.de