pengenalan
This manual provides instructions for the proper setup, operation, and maintenance of your Speedlink Table Mount (Model SL-650900-BK). This mount is designed to securely attach compatible racing wheels to a table surface, enhancing your gaming experience. Please read these instructions carefully before use.
Keserasian Produk
The Speedlink Table Mount is compatible with the following racing wheels:
- Speedlink DRIFT O.Z. Racing Wheel (for PC)
- Speedlink TRAILBLAZER Racing Wheel (for PC, PS4, PS3, Xbox, and Nintendo Switch)
Arahan Persediaan
Follow these steps to properly install the Speedlink Table Mount and attach your racing wheel:
- Sediakan Permukaan Jadual: Ensure your table surface is clean and stable. The table mount is designed for table tops with a maximum thickness of 40 millimeters.
- Letakkan Pemasangan: Place the racing wheel, with the table mount attached, onto the edge of your table where you intend to use it. Ensure the mount's clamp is positioned correctly under the table edge.
- Selamatkan Gunung: Tighten the hand screw on the table mount until it is firmly secured to the table. Ensure there is no movement or wobbling. The strong attachment provides maximum grip during use.
Figure 1: Diagram illustrating the table mount's attachment to a table, highlighting the 40mm maximum thickness.
Figure 2: Hands demonstrating the attachment of the table mount to a desk surface.
Figure 3: A racing wheel fully installed on the table mount, ready for use.
Arahan Operasi
Once the table mount and racing wheel are securely installed, the system is ready for use. The robust design ensures stability during intense gaming sessions. No specific operational steps are required for the mount itself beyond ensuring its secure attachment.
Penyelenggaraan
To ensure the longevity and optimal performance of your Speedlink Table Mount, follow these simple maintenance guidelines:
- Pembersihan: Wipe the mount with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these can damage the material.
- Periksa Keketatan: Periodically check the hand screw to ensure it remains tight and the mount is securely fastened to the table. Re-tighten if any looseness is detected.
- Storan: If not in use for an extended period, detach the mount and store it in a clean, dry place.
Menyelesaikan masalah
If you encounter issues with your Speedlink Table Mount, refer to the following common problems and solutions:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Mount feels loose or wobbles | Hand screw not tightened sufficiently; table thickness exceeds 40mm. | Ensure the hand screw is fully tightened. Verify that your table thickness is within the 40mm limit. |
| Racing wheel is not stable on the mount | Improper attachment of the racing wheel to the mount. | Refer to your specific racing wheel's manual for instructions on how to properly attach it to a table mount. Ensure all connections are secure. |
Spesifikasi
| Ciri | Perincian |
|---|---|
| Nombor Model | SL-650900-BK |
| Dimensi Produk | 6.77 x 8.62 x 5.51 inci |
| Berat Barang | 15.2 auns |
| Maximum Table Thickness | 40 milimeter |
| Kaedah Lampiran | Hand Screw Clamp |
Waranti dan Sokongan
For warranty information or technical support, please visit the official Speedlink webtapak atau hubungi bahagian perkhidmatan pelanggan mereka. Simpan resit pembelian anda sebagai bukti pembelian.
Official Speedlink Webtapak: www.speedlink.com
