WisHomee Dimmable RV Reading Light with USB Charging Port (Model WH-12VBD-008) Instruction Manual

pengenalan

Thank you for choosing the WisHomee Dimmable RV Reading Light with USB Charging Port. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new lighting fixture. Please read this manual thoroughly before installation and retain it for future reference.

Produk Selesaiview

The WisHomee RV Reading Light is designed for DC 12V applications in campers, vans, boats, and motorhomes. It features a flexible arm, dimmable LED light, and an integrated USB charging port.

Ciri-ciri Utama:

• Port USB Piawai: Integrated 5V/2A USB port for charging mobile devices.
• LED Cekap Tenaga: 3W light source providing 200 lumens, drawing only 0.2A at 12V.
• Dimmable Warm Light: 3000K warm white light with touch control for stepless brightness adjustment (10-100%).
• Flexible and Rotatable Arm: 360-degree rotatable arm allows for directional lighting without disturbing others.
• Selamat Rendah Voltage Operasi: Designed specifically for 12V DC systems.

Apa yang ada di dalam Kotak:

• WisHomee Dimmable RV Reading Light (2 units)
• Mounting Screws (2 per light)
• Note: USB charging cable is not included.

Figure 1: WisHomee Dimmable RV Reading Lights with USB Charging Port.

Maklumat Keselamatan

• This light fixture is designed for DC 12V applications only. Do not connect to AC power or 110V supplies, as this will irreversibly damage the light and may pose a safety hazard.
• Ensure correct wiring: Red wire connects to the positive (+) electrode, and black wire connects to the negative (-) electrode. Incorrect connection will damage the light.
• Sentiasa putuskan kuasa sebelum pemasangan, penyelenggaraan atau penyelesaian masalah.
• Do not attempt to modify or disassemble the light fixture beyond what is described in this manual.
• Keep away from water and moisture. This product is not waterproof.

Persediaan dan Pemasangan

This light fixture is designed for surface mount, hard-wired installation.

1. Pilih Lokasi Pemasangan: Select a flat surface within your RV, camper, van, or boat where you desire illumination. Ensure there is sufficient space behind the mounting surface for wiring.
2. Putuskan Kuasa: Before beginning any wiring, ensure that the 12V DC power supply to the installation area is completely disconnected to prevent electrical shock.
3. Sediakan Pendawaian: Identify the positive (+) and negative (-) 12V DC wires from your vehicle's electrical system.
4. Lekapkan Pangkalan:
   • Carefully remove the cover of the light's base to access the mounting bracket and wiring terminals. The cover is typically secured by screws on the sides.
   • Position the light base on your chosen surface. Mark the locations for the mounting screws.
   • Drill pilot holes if necessary, then secure the light base to the surface using the provided screws.
5. Sambungan wayar:
   • Sambungkan wayar merah from the light fixture to the positive (+) 12V DC wire from your vehicle.
   • Sambungkan wayar hitam from the light fixture to the negative (-) 12V DC wire from your vehicle.
   • Pastikan semua sambungan selamat dan terlindung dengan betul.
   

   Figure 2: Wiring connections for 12V DC. Red wire is positive, black wire is negative.

6. Pasang semula Penutup: Once wiring is complete and secure, reattach the base cover.
7. Pulihkan Kuasa: Reconnect the 12V DC power supply.

Gambar 3: Cthamples of light installation in RVs.

Arahan Operasi

Kawalan Cahaya:

• Hidupkan/Matikan: Lightly touch the switch button on the base of the light to turn it on or off.
• Adjust Brightness (Dimming): Long press the switch button to adjust the brightness. The light will cycle through its dimming range (10-100%). Release the button when the desired brightness is reached.

Figure 4: Touch control for light operation and dimming.

Port Pengecasan USB:

• The integrated USB port provides 5V/2A output for charging compatible devices such as smartphones or tablets.
• Simply plug your device's USB charging cable (not included) into the port located on the side of the light's base.

Figure 5: USB Charging Port location.

Pelarasan Lengan Fleksibel:

• The flexible gooseneck arm allows for 360-degree rotation and adjustment of the light head.
• Gently bend and position the arm to direct the light precisely where needed.

Figure 6: Flexible arm rotation and adjustment.

Penyelenggaraan

• Pembersihan: Disconnect power before cleaning. Use a soft, dry cloth to wipe the surface of the light fixture. Do not use abrasive cleaners or solvents.
• Pemeriksaan: Periksa sambungan pendawaian secara berkala untuk kesesakan dan tanda-tanda haus atau kerosakan.
• No user-serviceable parts are inside the light head or base.

Menyelesaikan masalah

Spesifikasi

Rajah 7: Dimensi produk.

Waranti dan Sokongan

For warranty information or technical support, please contact WisHomee customer service directly. Refer to your purchase documentation or the seller's weblaman web ini untuk butiran hubungan khusus dan terma jaminan yang terpakai di rantau anda.

Jenama: WisHomee

model: WH-12VBD-008