Manual Pengguna Pembersih Vakum Basah dan Kering Industri Vacmaster VK1638SWC

1. Pengenalan

Thank you for choosing the Vacmaster VK1638SWC Industrial Wet and Dry Vacuum Cleaner. This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your new appliance. Please read these instructions thoroughly before use and retain them for future reference.

Image: The Vacmaster VK1638SWC vacuum cleaner actively cleaning a workshop floor, demonstrating its industrial application.

2. Maklumat Keselamatan

Sentiasa ikuti langkah berjaga-jaga keselamatan asas apabila menggunakan perkakas ini untuk mengurangkan risiko kebakaran, kejutan elektrik atau kecederaan.

• Baca semua arahan sebelum mengendalikan pembersih vakum.
• Jangan biarkan perkakas tanpa pengawasan apabila dipasang. Cabut plag dari saluran keluar apabila tidak digunakan dan sebelum diservis.
• Do not pick up hot ashes, coals, or flammable/combustible liquids.
• Jangan gunakan di sekitar cecair atau wap yang boleh meletup.
• Ensure all filters are correctly installed for the intended operation (wet or dry).
• Jauhkan rambut, pakaian longgar, jari dan semua bahagian badan daripada bukaan dan bahagian yang bergerak.
• Gunakan hanya seperti yang diterangkan dalam manual ini. Gunakan hanya lampiran yang disyorkan pengilang.
• Jangan gunakan dengan kord atau palam yang rosak. Jika perkakas tidak berfungsi sebagaimana mestinya, telah terjatuh, rosak, ditinggalkan di luar atau terjatuh ke dalam air, kembalikan ke pusat servis.
• Jangan tarik atau bawa dengan kord, gunakan kord sebagai pemegang, tutup pintu pada kord, atau tarik kord di sekeliling tepi atau sudut yang tajam. Jangan jalankan perkakas di atas kord. Jauhkan kord dari permukaan yang dipanaskan.
• Jangan cabut plag dengan menarik kord. Untuk mencabut palam, pegang palam, bukan kordnya.
• Jangan pegang palam atau perkakas dengan tangan yang basah.
• Matikan semua kawalan sebelum mencabut plag.
• Gunakan lebih berhati-hati semasa membersihkan di tangga.
• Jangan gunakan untuk mengambil cecair mudah terbakar atau mudah terbakar, seperti petrol, atau gunakan di kawasan yang mungkin terdapat.
• Jangan ambil apa-apa yang terbakar atau berasap, seperti rokok, mancis, atau abu panas.
• Jangan gunakan tanpa penapis di tempatnya.
• Perkakas ini tidak dimaksudkan untuk digunakan oleh orang (termasuk kanak-kanak) yang kurang keupayaan fizikal, deria atau mental, atau kurang pengalaman dan pengetahuan, melainkan mereka telah diberi pengawasan atau arahan mengenai penggunaan perkakas oleh orang yang bertanggungjawab untuk keselamatan mereka.
• Kanak-kanak harus diawasi untuk memastikan bahawa mereka tidak bermain dengan perkakas.

3. Kandungan Pakej

Carefully unpack the box and ensure all items are present and undamaged. If any parts are missing or damaged, contact Vacmaster customer support.

• 1 x Dust Extractor Unit
• 1 x HEPA 13 Cartridge Filter
• 1 x HEPA Exhaust Filter
• 1 x Pre-filter (washable)
• 1 x Penapis Buih
• 2 x Tiub Sambungan
• 1 x Handle with Air Flow Control
• 1 x Universal Floor Head
• 1 x Dual Mode Floor Head
• 1 x Anti-crush Hose
• 1 x Round Dusting Tool
• 1 x Extra-large Crevice Tool
• 1 x Universal Power Tool Adaptor
• 1 x Accessory Pouch
• 1 x 38L Hygiene Seal Dust Bag

Image: The Vacmaster VK1638SWC unit displayed with its full range of included accessories.

4. Persediaan

4.1 Memasang Vakum

1. Lampirkan Kastor: Insert the casters into the designated slots on the base of the vacuum until they click securely into place.
2. Lampirkan Pemegang: Secure the handle to the top of the unit using the provided hardware.
3. Sambungkan Hos: Insert the anti-crush hose into the suction inlet on the front of the tank. Ensure it is firmly seated.
4. Pasang Penapis: Refer to section 4.2 for specific filter installation based on your intended use (wet or dry).

Imej: Dari dekat view of the yellow latch, indicating how to secure or release the motor head from the tank.

4.2 Pemasangan Penapis

The VK1638SWC uses different filters for wet and dry applications. Always ensure the correct filter is installed before operation.

• Untuk Pemvakum Kering: Install the HEPA 13 Cartridge Filter and the washable Pre-filter. Ensure the HEPA Exhaust Filter is also in place. The 38L hygiene seal dust bag can be used for improved dust collection and disposal.
• Untuk Pemvakum Basah: Remove the HEPA 13 Cartridge Filter and Pre-filter. Install the Foam Filter over the filter cage. Do NOT use the dust bag for wet vacuuming.

Image: A person demonstrating the process of accessing and handling the filter inside the vacuum cleaner's tank.

5. Arahan Operasi

5.1 Penyedutan Kering

1. Ensure the HEPA 13 Cartridge Filter and Pre-filter are correctly installed.
2. Connect the desired extension tubes and floor head (universal or dual mode) or other accessory to the hose.
3. Palamkan kord kuasa ke salur keluar elektrik yang sesuai (240 Volt).
4. Hidupkan pembersih vakum menggunakan suis kuasa.
5. Begin vacuuming the dry debris.
6. Apabila selesai, matikan vakum dan cabut plagnya.

Image: The Vacmaster VK1638SWC vacuum cleaner fully assembled with its hose, extension tubes, and floor head.

5.2 Penyedutan Basah

1. Ensure the Foam Filter is correctly installed and the HEPA 13 Cartridge Filter and Pre-filter are removed.
2. Connect the desired floor head or accessory suitable for wet pickup to the hose.
3. Palamkan kord kuasa ke salur keluar elektrik yang sesuai.
4. HIDUPKAN pembersih vakum.
5. Begin vacuuming liquids. The vacuum has an automatic shut-off feature that will stop suction when the tank is full.
6. When finished or when the tank is full, turn the vacuum OFF and unplug it. Empty the tank as described in the Maintenance section.

Image: The Vacmaster VK1638SWC vacuum cleaner demonstrating its liquid draining capability from the tank's outlet.

5.3 Fungsi Peniup

The VK1638SWC can also function as a powerful blower.

1. Ensure the tank is empty and clean, and the appropriate filter is installed (HEPA for dry blowing, no filter or foam filter for wet blowing).
2. Remove the hose from the suction inlet.
3. Insert the hose into the blower port located on the motor head.
4. Plug in and turn ON the vacuum to use the blower function.

5.4 Power Tool Connection

The included universal power tool adaptor allows for direct dust extraction when working with power tools.

1. Ensure the vacuum is set up for dry vacuuming with the HEPA 13 filter.
2. Connect the universal power tool adaptor to the end of the vacuum hose.
3. Attach the other end of the adaptor to the dust extraction port on your power tool.
4. Plug the power tool into the integrated power socket on the vacuum cleaner (if available and compatible). This allows the vacuum to start automatically when the power tool is activated.
5. Turn on the vacuum cleaner and then your power tool to begin dust extraction.

Image: The Vacmaster VK1638SWC vacuum cleaner connected to a sanding machine, demonstrating its dust extraction capability.

5.5 Using the Wheel Brake

To secure the vacuum cleaner in place, engage the wheel brake by pressing down on the lever located on one of the casters. To release, lift the lever.

Image: A person's foot pressing down on the yellow lever to engage the wheel brake on the vacuum cleaner.

6. Penyelenggaraan

Penyelenggaraan tetap memastikan prestasi optimum dan memanjangkan hayat pembersih vakum anda. Sentiasa cabut plag unit sebelum melakukan sebarang penyelenggaraan.

6.1 Pembersihan dan Penggantian Penapis

• HEPA 13 Cartridge Filter & Pre-filter: For dry use, these filters should be cleaned regularly by tapping them gently to dislodge dust or by using a soft brush. The pre-filter is washable; rinse with water and allow to air dry completely before reinstallation. Replace the HEPA cartridge filter when suction power significantly decreases or if it becomes damaged.
• Penapis Buih: For wet use, the foam filter should be rinsed with water after each use and allowed to air dry completely before storage or next use.
• HEPA Exhaust Filter: Check periodically and replace if visibly dirty or if air quality issues are noted.

6.2 Tank Cleaning and Emptying

• Serpihan Kering: Unlatch the motor head and carefully lift it off. Remove the dust bag (if used) and dispose of contents. Empty any remaining debris from the stainless steel tank.
• Cecair: For liquid disposal, the tank can be emptied by tilting the unit or by using the drain plug located at the bottom of the tank. After emptying, rinse the tank with water and wipe dry to prevent odors and corrosion.

6.3 Storan Aksesori

The VK1638SWC features integrated storage for its accessories, keeping them organized and readily accessible.

Image: The Vacmaster VK1638SWC vacuum cleaner showcasing its onboard storage for hose, power cord, and various attachments.

7. Penyelesaian masalah

Sebelum menghubungi sokongan pelanggan, rujuk jadual berikut untuk isu biasa dan penyelesaiannya.

8. Spesifikasi

9. Waranti dan Sokongan

9.1 Maklumat Waranti

The Vacmaster VK1638SWC Industrial Wet and Dry Vacuum Cleaner comes with a Waranti 2 tahun from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, abuse, accident, unauthorized repairs, or lack of maintenance.

9.2 Sokongan Pelanggan

For technical assistance, warranty claims, or to order replacement parts, please contact Vacmaster customer support. Refer to the contact information provided with your purchase documentation or visit the official Vacmaster webtapak.