VEVOR VVGrey2-54

VEVOR 54-Site 2-Layer Hydroponics Growing System User Manual

Model: VVGrey2-54

pengenalan

This manual provides detailed instructions for the assembly, operation, and maintenance of your VEVOR 54-Site 2-Layer Hydroponics Growing System. This system is designed for soilless cultivation, allowing for efficient growth of various plants such as vegetables, fruits, and herbs in an indoor or outdoor environment. Please read this manual thoroughly before use to ensure proper setup and safe operation.

Arahan Keselamatan

  • Always disconnect the power supply before performing any maintenance, cleaning, or assembly.
  • Ensure all electrical connections are dry and protected from water. Use a ground fault circuit interrupter (GFCI) for all electrical outlets.
  • Do not operate the water pump dry. Ensure it is fully submerged in water when in use.
  • Jauhkan sistem daripada kanak-kanak dan haiwan peliharaan.
  • Use only food-grade nutrient solutions and follow their instructions for safe handling and mixing.
  • Letakkan sistem di atas permukaan yang stabil dan rata untuk mengelakkannya daripada terbalik.
  • Avoid exposing the system to extreme temperatures or direct sunlight for prolonged periods if not designed for such conditions.

Kandungan Pakej

Verify that all components are present and undamaged before assembly. If any parts are missing or damaged, contact VEVOR customer service.

  • 1 x Set of PVC Planting Pipes (6 pipes, 2 layers)
  • 4 x Roda
  • 1 x Timer (24-hour plug-in type)
  • 1 x Water Pump (10W)
  • 1 x Hos Air
  • 1 x Palam Kuasa
  • 54 x Bakul Penanaman
  • 54 x Span Penanaman
  • 1 x Pinset
  • 1 x Rubber Hammer
  • 1 x Manual Arahan
  • Note: A 20L water tank/bucket is suggested but not included.
Components of the VEVOR Hydroponics Growing System including pipes, pump, timer, and accessories.

Image: All included components for the VEVOR Hydroponics Growing System, laid out for inspection.

Perhimpunan dan Persediaan

Follow these steps to assemble your hydroponics system. A rubber hammer is provided to assist with fitting the PVC pipes securely.

  1. Pasang Bingkai: Connect the PVC pipes and connectors to form the two-layer frame structure. Ensure all connections are tight and secure. Use the rubber hammer gently if needed to fully seat the pipes into the connectors.
  2. Pasang Roda: Attach the four wheels to the bottom legs of the frame.
  3. Attach Planting Pipes: Secure the six planting pipes onto the assembled frame. Ensure the holes for the planting baskets are facing upwards.
  4. Connect Water Inlet/Outlet: Connect the water inlet and outlet pipes to the main circulation system. Refer to the diagram for correct orientation.
  5. Position Water Pump: Place the 10W water pump inside a 20L water tank (not included). Connect the water hose from the pump to the system's water inlet.
  6. Connect Timer: Plug the water pump into the 24-hour plug-in timer, and then plug the timer into a suitable electrical outlet.
  7. Initial Water Fill: Fill the water tank with clean water and the appropriate hydroponic nutrient solution according to the nutrient solution manufacturer's instructions. Ensure the water pump is fully submerged.
Diagram showing the food-grade PVC pipes, water inlet, water outlet, and water separator components of the hydroponics system.

Imej: Terperinci view of the PVC pipe connections, including water inlet, outlet, and separator.

Diagram illustrating the water circulation system with the pump, timer, and water flow through the hydroponic pipes.

Imej: Selesaiview of the water circulation system, showing the pump, timer, and nutrient solution flow.

Arahan Operasi

This section guides you through the process of planting and managing your hydroponic garden.

  1. Seed Germination:
    • Place seeds into the provided planting sponges.
    • Keep the sponges moist in a warm environment until sprouts appear.
  2. Pemindahan: Once seedlings have developed a few true leaves and a small root system, carefully transplant them into the net baskets. Place the net baskets into the holes of the hydroponic pipes.
  3. Tetapan Pemasa: Set the 24-hour timer for the water pump. Recommended settings are typically 5/15/30 minutes ON and 30/60/120 minutes OFF, depending on plant type and growth stage. Adjust as needed to ensure roots are consistently moist but not waterlogged.
  4. Nutrient Solution Management:
    • Regularly check the water level in the reservoir and replenish as needed with fresh water and nutrient solution.
    • Monitor the pH and Electrical Conductivity (EC) of the nutrient solution using appropriate testing kits (not included) to ensure optimal plant growth. Adjust as necessary.
  5. Pencahayaan: Ensure your plants receive adequate light. For indoor setups, supplemental grow lights may be necessary.
  6. Penuaian: Harvest vegetables, fruits, or herbs as they mature. Many leafy greens can be harvested within 30-60 days.
Step-by-step diagram showing the process of planting: seeding, sprouting, transplanting, planting, growing, and harvesting.

Image: Visual guide to the planting process from seed to harvest.

Image showing various plants like lettuce, strawberries, herbs, and flowers growing in the hydroponics system, demonstrating its wide application.

Imej: Cthamples of plants that can be grown using the VEVOR Hydroponics System, including lettuce, strawberries, and herbs.

Penyelenggaraan

Regular maintenance ensures the longevity and optimal performance of your hydroponics system.

  • Nutrient Solution Replacement: Completely drain and replace the nutrient solution every 1-2 weeks, or as recommended by your nutrient solution manufacturer, to prevent nutrient imbalances and pathogen buildup.
  • Pembersihan Sistem: Periodically clean the pipes and reservoir to remove algae and mineral deposits. Use a soft brush and a mild, plant-safe cleaning solution. Rinse thoroughly with clean water.
  • Pembersihan Pam: Disassemble and clean the water pump regularly to remove any debris or mineral buildup that could impede its function. Ensure the impeller is free to spin.
  • Root Management: Monitor plant roots. If roots become excessively long and begin to clog the pipes, trim them carefully to maintain proper water flow.
  • Semak Kebocoran: Regularly inspect all connections and hoses for any signs of leaks and address them promptly.

Menyelesaikan masalah

Rujuk bahagian ini untuk isu biasa dan kemungkinan penyelesaiannya.

MasalahKemungkinan PuncaPenyelesaian
Water pump not runningNo power, clogged impeller, pump not submerged.Check power connection and timer settings. Disconnect power, clean pump impeller. Ensure pump is fully submerged in water.
Poor water flow or clogsDebris in pipes, excessive root growth, pump malfunction.Inspect pipes for blockages and clean. Trim excessive roots. Clean or replace pump if necessary.
Tumbuhan tidak tumbuh dengan baikIncorrect nutrient solution, improper pH/EC, insufficient light, temperature issues.Verify nutrient solution concentration and type. Test and adjust pH/EC. Ensure adequate light exposure. Check ambient temperature.
Pertumbuhan algaLight exposure to nutrient solution, high temperatures.Ensure reservoir and pipes are light-proof. Reduce ambient temperature if possible. Clean system regularly.
Kebocoran sistemLoose connections, damaged pipes/hoses.Check all PVC pipe connections and hose fittings for tightness. Replace any damaged components.

Spesifikasi

  • model: VVGrey2-54
  • Bahan: Food-Grade PVC-U
  • Lapisan: 2
  • Plant Sites: 54
  • Pipe Quantity: 6
  • Pipe Dimensions: Approximately 31 inches (78.7 cm) length, 2.5 inches (6.35 cm) diameter
  • Spacing between Holes: 2 inci (5.08 cm)
  • Dimensi Keseluruhan (L x W x H): Kira-kira 37.4 x 13.4 x 32.7 inci (95 x 34 x 83 cm)
  • Water Pump Voltage: AC110 V
  • Kuasa Pam Air: 10 W
  • Berat Barang: 14.17 paun (6.43 kg)
Diagram showing the dimensions of the VEVOR Hydroponics Growing System and its components like net cups, hose, timer, and pump.

Image: Detailed product specifications and dimensions of the hydroponics system and its accessories.

Waranti dan Sokongan

Produk VEVOR direka bentuk untuk ketahanan dan prestasi. Untuk maklumat jaminan, sokongan teknikal atau untuk bertanya tentang alat ganti, sila hubungi khidmat pelanggan VEVOR melalui khidmat pelanggan rasmi mereka. website or the retailer where the product was purchased. Please have your model number (VVGrey2-54) and purchase date available when contacting support.

For more information, visit the official VEVOR Store: Kedai VEVOR di Amazon

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.