Produk Selesaiview
The SOLVTIN S6 Pro Max is a powerful and versatile portable battery jump starter designed to revive dead vehicle batteries quickly and efficiently. With a peak current of 3000A, it can start 12V vehicles with up to 10L gas or 8L diesel engines in seconds, even in extreme temperatures ranging from -4°F to 140°F. It offers up to 60 starts on a single charge.
Beyond its primary function, this device features a 100W two-way fast charging port, allowing it to be fully recharged in approximately one hour. It also serves as a 20000mAh portable power bank for charging various USB devices, including laptops, and includes a 400-lumen LED light with multiple modes (flashlight, strobe, SOS) for emergencies.
Safety is paramount, with 8 built-in safety protections and an IP65 water and dust resistant enclosure ensuring durable and reliable operation.
Image: The SOLVTIN S6 Pro Max Jump Starter connected to a car battery, demonstrating its ability to revive vehicles quickly.
Image: A chart illustrating the powerful jump performance of the SOLVTIN S6 Pro Max, showing compatibility with various engine sizes from 1.5L motorcycles to 10L gas and 8L diesel vehicles.
Apa yang Termasuk
Upon unboxing your SOLVTIN S6 Pro Max Jump Starter, please ensure all the following items are present:
- 1x SOLVTIN S6 PRO MAX Jump Starter Battery Pack
- 1x SC 100W Car Charger
- 1x Heavy Duty Jumper Cables
- 1x DC 12V Cigarette Lighter Adapter
- 1x USB-A to C Cable
- 1x Kabel USB-C ke C
- 1x Manual Pengguna
- 1x Kad Waranti
Image: A flat lay of all components included in the SOLVTIN S6 Pro Max Jump Starter package, including the main unit, cables, charger, and manual.
Persediaan
Pengecasan Awal
Before first use, it is recommended to fully charge your SOLVTIN S6 Pro Max. The device features a 100W two-way fast charging port for rapid replenishment.
- Connect the provided SC 100W car charger or your own compatible charger to the 100W in/out port on the jump starter.
- Palamkan pengecas ke sumber kuasa.
- The LED display will show the charging status. A full charge from 0% to 100% typically takes about 1 hour. A 3-minute charge can bring the device to 20% capacity.
Image: The SOLVTIN S6 Pro Max Jump Starter connected via its Type-C port for 100W super fast charging, with charging times displayed on the screen.
Image: An illustration highlighting the blazing-fast 100W charging speed of the SOLVTIN S6 Pro Max, showing it can reach 100% charge in just 1 hour.
Understanding the LED Display
The 3.2-inch LED screen provides crucial information about the device's status and jump-starting instructions.
- Battery Storage Level: Menunjukkan peratusan cas semasatage daripada pemula lompat.
- Small Current Mode: Indicates when the device is in low-power charging mode for small electronics.
- Reverse Connection Warning: Alerts if the clamps are connected incorrectly to the battery terminals.
- Amaran Suhu Rendah: Indicates if the operating temperature is too low for optimal performance.
- "READY" Solid: Means the unit is ready to start the vehicle.
- "READY" Blinks: Means the car battery voltage is too low, and the override mode may need to be activated (refer to troubleshooting).
Imej: A terperinci view of the 3.2-inch Smart LED Screen on the SOLVTIN S6 Pro Max, showing battery percentage dan status pengecasan.
Image: A diagram labeling the various indicators and buttons on the SOLVTIN S6 Pro Max, including Battery Storage Level, Small Current Mode, and the BOOST button.
Arahan Operasi
Lompat Memulakan Kenderaan
Ikuti langkah-langkah ini untuk menghidupkan kenderaan anda dengan selamat:
- Sediakan Kenderaan: Ensure the vehicle is in PARK (automatic) or NEUTRAL (manual) and the parking brake is engaged. Turn off all accessories (headlights, radio, AC, etc.).
- Sambungkan Kabel Jumper:
- Sambungkan cl merah (positif, +)amp ke terminal positif bateri kenderaan.
- Sambungkan cl hitam (negatif, -)amp ke terminal negatif bateri kenderaan.
- Pastikan terminal bateri bebas daripada kakisan.
- Sambungkan ke Jump Starter: Plug the jumper cable connector into the jump starter's insulated port.
- Semak Paparan: The LED display should show "READY" solid. If it blinks, the battery voltage is very low, and you may need to press the "BOOST" button (refer to troubleshooting).
- Mulakan Kenderaan: Once "READY" is solid, start your vehicle's engine.
- Putuskan sambungan: After the vehicle starts, immediately disconnect the jumper cables from the jump starter, then from the vehicle battery (negative first, then positive).
Mohon Peringatan:
- ● Pastikan terminal bateri bebas daripada kakisan.
- ● Ensure the battery power is higher than 20% before jump starting the vehicle.
- ● Ensure the vehicle is in PARK gear and all accessories (headlights, audio, etc.) are turned off.
- ● Pastikan dua clamps disambungkan ke terminal yang betul.
- ● JANGAN tekan butang BOOST sebelum menyambungkan bateri kenderaan dengan betul.
Image: A visual guide demonstrating the three main steps to jump start a car using the SOLVTIN S6 Pro Max: Connect Vehicle Battery, Wait for READY (solid), and Start Vehicle Engine.
Video: An official demonstration by SOLVTIN showing the process of connecting the S6 Pro Max Jump Starter to a car battery and successfully starting the vehicle. This video also highlights the 3.2-inch LED display and 100W fast charging capability.
Menggunakan sebagai Bank Kuasa Mudah Alih
The SOLVTIN S6 Pro Max doubles as a 20000mAh portable power bank, capable of charging various electronic devices.
- Connect your USB devices (phones, tablets, laptops, headsets, smartwatches, etc.) to the available USB output ports.
- The 15V/12A DC output port can power car accessories (under 15V).
- For low-current devices like headsets or smartwatches, switch to the small current mode if available (refer to the LED display section for indicator).
Image: The SOLVTIN S6 Pro Max functioning as a portable power bank, simultaneously charging a smartphone and a laptop, demonstrating its versatility.
Fungsi Lampu LED
The integrated 400-lumen LED light provides illumination in various situations:
- Mod Lampu Suluh: Memberikan pencahayaan yang stabil untuk kegunaan umum.
- Emergency Strobe Mode: Flashes rapidly to attract attention.
- Mod SOS: Emits the international Morse code signal for distress (three short, three long, three short flashes).
Image: The 400-lumen LED light of the SOLVTIN S6 Pro Max illuminating an engine bay, showcasing its utility as a flashlight, emergency strobe, and SOS light.
Penyelenggaraan dan Penyimpanan
Proper maintenance and storage will extend the lifespan of your SOLVTIN S6 Pro Max Jump Starter.
- Pengecasan Biasa: To maintain battery health, it is recommended to recharge the device every 3 months, even if not in use.
- Pembersihan: Lap unit dengan kain kering dan lembut. Jangan gunakan bahan kimia yang keras atau pembersih yang kasar.
- Storan: Store the jump starter in a cool, dry place, away from direct sunlight and extreme temperatures. The IP65 rating provides water and dust resistance, but avoid prolonged exposure to harsh conditions.
- Penjagaan Kabel: Ensure jumper cables are clean and free of damage before and after each use. Store them neatly to prevent tangling or crimping.
Image: The SOLVTIN S6 Pro Max Jump Starter covered in water droplets, emphasizing its IP65 water and dust resistance and built-in safety protections.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| "READY" light is blinking on the display. | Bateri kereta voltage is extremely low (below 1V). | Press and hold the "BOOST" button for 3 seconds until the "READY" light becomes solid. This activates the override mode. Attempt to start the vehicle within 30 seconds. |
| Jump starter tidak dihidupkan atau dicas. | Battery is completely depleted or charging cable/adapter is faulty. | Ensure the jump starter has at least 20% charge. Try a different charging cable or adapter. If the issue persists, contact customer support. |
| Kenderaan tidak bermula selepas percubaan melompat. | Incorrect cable connection, severely damaged battery, or other vehicle issues. | Semak semula bahawa clamps are securely connected to the correct battery terminals (positive to positive, negative to negative). Ensure battery terminals are clean. If the battery is severely damaged, it may not accept a jump start. Consult a mechanic for further diagnosis. |
| Charging indicator seems inaccurate. | Temporary display glitch. | Stop the charge, wait 10 seconds, and reconnect the USB charger to reset the charging indication. |
Spesifikasi Teknikal
| Ciri | Perincian |
|---|---|
| Jenama | SOLVTIN |
| Nombor Model | S6 PRO MAX |
| Arus Keluaran Puncak | 3000 Amps |
| Keserasian Enjin | Sehingga 10L Gas / 8L Diesel |
| Kapasiti Bateri | 20000mAh (approximate, derived from power bank feature) |
| Kelajuan Mengecas | 100W Two-Way Fast Charging (PD100W Max) |
| Paparan | Skrin LED 3.2 inci |
| Lampu LED | 400 Lumens (Flashlight, Strobe, SOS modes) |
| Perlindungan Keselamatan | 8 built-in safety protections (Short-Circuit, Over-Temperature, Over-Voltage, Over-Charge, Over-Discharge, Over-Current, Reverse-Polarity, Low-Temperature) |
| Tahan Air & Debu | Nilai IP65 |
| Suhu Operasi | -4°F hingga 140°F (-20°C hingga 60°C) |
| Dimensi Produk | 9.92"W x 4.76"D x 4.64"H |
| Berat Barang | 3.52 paun |
Waranti dan Sokongan
Your SOLVTIN S6 Pro Max Jump Starter comes with a Waranti 2 TAHUN dari tarikh pembelian.
For technical assistance, troubleshooting, or warranty claims, SOLVTIN offers 24-hour online Lifetime Expert Technical Support.
Sila rujuk kad jaminan yang disertakan dalam pakej anda untuk terma dan syarat terperinci.
For additional information or to download the official user manual, please visit the SOLVTIN User Manual (PDF).