1. Pengenalan
This manual provides essential instructions for the safe installation, operation, and maintenance of your OOYCYOO 100A MPPT Solar Charge Controller. Please read this manual thoroughly before installation and use to ensure optimal performance and longevity of the product. Keep this manual for future reference.
Langkah-langkah Keselamatan
- Ensure all wiring is correctly connected and secured to prevent short circuits or damage.
- Sentiasa sambungkan bateri dahulu, kemudian panel solar, dan akhirnya beban. Putuskan sambungan dalam susunan terbalik.
- Jangan cuba membaiki atau mengubah suai alat kawalan sendiri. Hubungi kakitangan yang berkelayakan untuk servis.
- Pasang pengawal di kawasan yang mempunyai pengudaraan yang baik, jauh daripada bahan mudah terbakar dan cahaya matahari langsung.
- Wear appropriate personal protective equipment (PPE) during installation, including eye protection and insulated gloves.
2. Produk Lebihview
The OOYCYOO 100A MPPT Solar Charge Controller is designed to efficiently manage power from your solar panels to charge various battery types, including 12V, 24V, 36V, and 48V systems. It features advanced Maximum Power Point Tracking (MPPT) technology for high conversion efficiency.
Ciri-ciri Utama:
- Automatic identification of 12V/24V/36V/48V DC system voltage.
- High maximum power tracking rate (≥99%) and conversion rate (>99%).
- Compatible with multiple battery types: USER (customizable), Flooded, Sealed, Gel, and Lithium (LiFePO4, Li(NiCoMn)O2).
- Programmable settings for absorption voltage, vol terapungtage, dan vol rendahtage putuskan sambungan.
- Integrated LCD display showing charge amount (KWH) and other operational data.
- Comprehensive protection functions: PV over current/power, PV short circuit, PV reverse polarity, night reverse charging, battery reverse polarity, battery over voltage, battery over discharge, battery overheating, controller overheating, lithium battery low temperature, load short circuit, load overload, TVS high voltage sementara.
- Built-in cooling fan for efficient heat dissipation, activating when temperature >45℃ and deactivating when <40℃.
- USB 5V 2A charging ports.
Pengenalan Komponen:
Rajah 1: Depan dan belakang view of the OOYCYOO 100A MPPT Solar Charge Controller, showing the LCD display and connection terminals.
Rajah 2: Terperinci view of the controller's connection terminals, including Solar Panel, Battery, Load, Remote Temp Sensor, and USB ports.
3. Spesifikasi
| Parameter | Nilai |
|---|---|
| Kadar Caj Semasa | 100A |
| Sistem Nominal Voltage | 12V/24V/36V/48V DC Auto Identifying |
| Maks. Litar Terbuka PV Voltage | 150VDC |
| 12V System Max. PV Input Power | 1300W (Voc ≤96V) |
| 24V System Max. PV Input Power | 2600W (Voc ≤112V) |
| 36V System Max. PV Input Power | 3800W |
| 48V System Max. PV Input Power | 5000W (Voc ≤150V) |
| MPPT Best Working VoltagJulat e (12V) | DC18V-DC96V |
| MPPT Best Working VoltagJulat e (24V) | DC36V-DC112V |
| MPPT Best Working VoltagJulat e (48V) | DC72V-DC150V |
| Maximum DC/DC Transfer Efficiency | 98.7% |
| Power Terminal Wire Gauge | 10 AWG |
| Dimensi (L x W x H) | 12" x 7.8" x 3.2" (30.5cm x 19.8cm x 8.1cm) |
| Berat badan | 9.5 paun (4.3 kg) |
| Suhu Operasi | Up to 40℃ (Fan operates above 45℃) |
| bahan | logam |
| Jenis Paparan | LCD |
| Output USB | 5V 2A |
Rajah 3: Application table detailing solar panel input requirements for different system voltages.
4. Persediaan dan Pemasangan
Proper installation is crucial for the safe and efficient operation of your solar charge controller. Refer to Figure 2 for terminal identification.
Langkah Pemasangan:
- Pemasangan: Choose a dry, well-ventilated location, protected from direct sunlight, high temperatures, and moisture. Ensure adequate clearance around the controller for air circulation, especially for the cooling fan. Use the mounting holes provided to secure the controller to a stable surface.
- Sambungan Bateri: Connect the battery cables to the battery terminals on the controller (marked with '+' and '-'). Ensure correct polarity. Connect the other end of the cables to your battery bank. Always connect the battery first.
- Sambungan Panel Suria: Connect the solar panel cables to the PV terminals on the controller (marked with '+' and '-'). Ensure correct polarity. Connect the other end of the cables to your solar panel array.
- Sambungan Beban (Pilihan): If you are connecting a DC load directly to the controller, connect the load cables to the load terminals (marked with '+' and '-'). Ensure correct polarity.
- Sambungan Penderia Suhu: Connect the included temperature sensor to the designated 'TEMP SENSOR' port. Place the sensor near the battery to ensure accurate temperature compensation for charging.
- Hidupkan kuasa: Once all connections are secure and verified for correct polarity, the controller will power on and display information on the LCD screen.
Jenis Bateri yang Serasi:
The controller supports various battery types. Ensure you select the correct battery type in the controller settings for proper charging and protection.
Rajah 4: The controller is compatible with AGM, Sealed, Gel, Flooded, and Lithium-Iron Phosphate batteries.
5. Arahan Operasi
LCD Display and Navigation:
The backlit LCD display provides real-time operational data. It directly shows the amount of charge in KWH, eliminating the need for external measuring instruments. Use the buttons below the display to navigate through menus and adjust settings.
- Butang Navigasi: Typically, there are buttons for 'Up', 'Down', 'Enter', and 'Escape' or similar functions to browse and confirm settings.
- 5S Reset: A dedicated button or combination of buttons may be available for a 5-second reset, which can be used to restart the controller or clear certain errors.
Tetapan Parameter:
The controller allows user-programmable settings for various parameters, especially for the 'USER' battery type. Consult the on-screen menu for specific options.
- Pemilihan Jenis Bateri: It is critical to select the correct battery type (AGM, Sealed, Gel, Flooded, or Lithium) to ensure proper charging algorithms and prevent battery damage. For Lithium batteries, specific voltage parameters may need to be set.
- Mengecas Voltages: For 'USER' battery types, you can customize absorption voltage, apungan voltage, dan vol rendahtage disconnect (LVD) thresholds. Refer to your battery manufacturer's specifications for recommended values.
- Load Timer: If a DC load is connected, you may be able to set a timer for its operation.
- Tetapan kilang: A key is available to restore the factory settings if needed.
6. Penyelenggaraan
Regular maintenance ensures the long-term reliability and performance of your solar charge controller.
- Pembersihan: Periodically clean the exterior of the controller with a dry cloth. Ensure the ventilation openings are free from dust and debris to maintain proper airflow for cooling.
- Pemeriksaan Sambungan: Annually, inspect all wiring connections for tightness and corrosion. Loose connections can cause overheating and power loss.
- Pemeriksaan Alam Sekitar: Ensure the installation environment remains dry and free from excessive dust or extreme temperatures.
- Kemas kini Firmware: Semak pengeluar website periodically for any available firmware updates, though this controller may not support user updates.
7. Penyelesaian masalah
Bahagian ini menangani isu biasa yang mungkin anda hadapi. Untuk masalah yang tidak disenaraikan di sini, sila hubungi sokongan pelanggan.
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Controller not powering on / No display | Bateri tidak disambungkan atau kekutuban terbalik; Voltan bateritage too low; Loose battery connection. | Periksa sambungan dan kekutuban bateri. Pastikan volum bateritage is above the minimum operating threshold. Tighten connections. |
| Tiada pengecasan daripada panel solar | PV panels not connected or reverse polarity; PV voltage too low/high; Shading on panels; PV short circuit. | Check PV connections and polarity. Ensure PV voltage is within the controller's operating range. Remove shading. Check for PV short circuit. |
| Bateri tidak dicas sepenuhnya | Incorrect battery type setting; Insufficient solar input; Battery degradation. | Verify battery type setting. Increase solar panel capacity or reduce load. Test battery health. |
| Beban tidak berfungsi | Load not connected or reverse polarity; Load short circuit; Load overload; Battery low voltage disconnect (LVD) activated. | Check load connections and polarity. Check for short circuits or overloads. Charge battery. |
| Pengawal terlalu panas | Poor ventilation; Excessive ambient temperature; Overload. | Ensure adequate airflow around the controller. Reduce load if possible. Relocate to a cooler environment. |
8. Waranti dan Sokongan
OOYCYOO products are manufactured to high-quality standards. Specific warranty terms and conditions are typically provided with your purchase documentation or can be found on the official OOYCYOO webtapak.
For technical support, troubleshooting assistance, or warranty claims, please contact OOYCYOO customer service through the retailer where you purchased the product or visit the official OOYCYOO webtapak untuk maklumat hubungan.
Please have your product model number (100A 12V 24V 36V 48V) and purchase date available when contacting support.