EverBrite Rechargeable LED Headlamp with Motion Sensor - User Manual

1. Produk Lebihview

The EverBrite Rechargeable LED Headlamp is a versatile lighting device designed for various activities such as hiking, running, camping, and general tasks. It features multiple lighting modes, a motion sensor for hands-free operation, and a rechargeable battery.

Image 1.1: The EverBrite headlamp, illustrating its main features including the light, headband, USB charging cable, and motion sensor functionality.

2. Kandungan Pakej

• 1 x EverBrite Rechargeable LED Headlamp
• 1 x Kabel Pengecasan Micro-USB
• 1 x Lithium Ion Battery (pre-installed)

3. Ciri-ciri Utama

• Bateri boleh dicas semula: Equipped with a 1200mAh lithium battery and Micro-USB charging.
• 9 Mod Pencahayaan: Includes XPE, COB, XPE+COB, Red Beam, and SOS Red Strobe in key light mode, plus XPE, COB, XPE+COB, and Red Beam in motion sensor mode.
• Penderia Gerakan: Allows hands-free operation to turn the light on/off with a wave of the hand.
• Ringan dan Tahan Lama: Constructed from ABS hard rubber, weighing approximately 0.17 lbs (80g).
• Destar boleh laras: Elastic headband fits head circumferences from 15.7" (40cm) to 31.5" (80cm).
• Sudut boleh laras: Ketuaamp can be tilted up to 45 degrees.
• Tahan Suhu: Operates effectively in temperatures from -4℉ (-20℃) to 140℉ (60℃).

4. Persediaan

4.1 Mengecas Headlamp

1. Locate the Micro-USB charging port on the headlamp.
2. Connect the provided Micro-USB cable to the headlamp and the other end to a 5V 1A USB charger (not included), power bank, or computer USB socket.
3. The power indicator lights will show the charging status. One light flashing indicates charging, and four solid lights indicate a full charge.
4. Cabut plag kepalaamp promptly after charging is complete to preserve battery life.

Penting: Do not turn on the light while the headlamp sedang mengecas.

Image 4.1: Illustration of the headlamp's Micro-USB charging port and battery indicator lights, demonstrating connection to a power source.

4.2 Melaraskan Ikat Kepala

1. Letakkan kepalaamp atas kepala awak.
2. Adjust the elastic headband to a comfortable fit. The band is designed to adapt to various head sizes (15.7"-31.5" / 40-80cm).
3. Pastikan headlamp is secure but not too tight to avoid discomfort during prolonged use.

Image 4.2: The adjustable and breathable headband of the EverBrite headlamp, shown being worn by individuals.

5. Arahan Operasi

5.1 Power On/Off and Mode Selection (Key Light Mode)

1. Press the power button once to turn on the headlamp.
2. Within 5 seconds of turning on, press the power button repeatedly to cycle through the following modes: XPE Mode (300 Lm) > COB Mode (300 Lm) > XPE+COB Mode (500 Lm) > Rasuk Merah > Strob Merah SOS.
3. If the light has been on for more than 5 seconds in any mode, a single press of the power button will turn the light off directly, without cycling through all modes.

Image 5.1: Visual representation of the headlamp's various lighting modes and their respective lumen outputs.

5.2 Motion Sensor Mode

1. To activate motion sensor mode, press the dedicated motion sensor button (usually indicated by a wave icon or distinct from the main power button). A red indicator light will illuminate.
2. Once activated, wave your hand within approximately 15 cm (6 inches) of the sensor to turn the light ON or OFF.
3. In motion sensor mode, you can cycle through XPE, COB, XPE+COB, dan Rasuk Merah by pressing the main power button.
4. To exit motion sensor mode, press the motion sensor button again.

Image 5.2: Demonstration of the motion sensor feature, showing how to activate it and use hand gestures to control the light.

5.3 Pelarasan Sudut

kepalaamp unit can be tilted up to 45 degrees to direct the light precisely where needed. Gently push or pull the light housing to adjust its angle.

Imej 5.3: Kepalaamp's adjustable angle mechanism, allowing users to direct the light beam.

6. Penyelenggaraan

6.1 Pembersihan

• Lap kepalaamp badan dengan lembut, damp kain. Jangan gunakan pembersih atau pelarut yang melelas.
• The headband is removable for easy washing. Hand wash with mild soap and water, then air dry completely before reattaching.

6.2 Penyimpanan

• Simpan kepalaamp di tempat yang sejuk dan kering jauh dari cahaya matahari langsung.
• For long-term storage, ensure the battery is partially charged (around 50%) and recharge it every 3-6 months to maintain battery health.

7. Penyelesaian masalah

• Ketuaamp tidak dihidupkan:
  - Ensure the battery is charged. Connect to a power source and check the charging indicator lights.
  - Verify the power button is pressed correctly.
• Hayat bateri pendek:
  - Ensure the headlamp is fully charged before use. Charging time is typically 2-3 hours.
  - Battery performance can decrease over time with repeated charge cycles.
• Kelipan cahaya:
  - This could indicate a low battery. Recharge the headlamp.
  - If flickering persists after charging, contact customer support.
• Motion sensor not responding:
  - Ensure motion sensor mode is activated (red indicator light is on).
  - Wave your hand within the optimal sensing distance (approx. 15 cm).
  - Clean the sensor area to remove any obstructions.

8. Spesifikasi

9. Waranti dan Sokongan

9.1 Maklumat Waranti

This EverBrite headlamp datang dengan a Waranti 2 tahun dari tarikh pembelian. Waranti ini meliputi kecacatan pembuatan dan mutu kerja di bawah penggunaan biasa. Ia tidak melindungi kerosakan yang disebabkan oleh penyalahgunaan, kemalangan, pengubahsuaian yang tidak dibenarkan atau haus dan lusuh biasa.

9.2 Sokongan Pelanggan

For technical assistance, warranty claims, or any questions regarding your EverBrite headlamp, please contact our customer support team:

• e-mel: support@everbrite.com (Example)
• telefon: 1-800-XXX-XXXX (Contohample)
• Webtapak: Visit the EverBrite Store on Amazon

Please have your model number (E021047AU) and proof of purchase ready when contacting support.