1. Produk Lebihview
The ANDELI MCT-520DPL is a versatile 5-in-1 multiprocess welding machine designed for various welding and cutting applications. It supports MIG (CO2/MIX/FLUX), TIG (HF), CUT (Plasma Cutting), COLD welding, PULSE TIG, and MMA (Stick) welding modes. This manual provides essential information for safe and effective operation of your welder.
2. Maklumat Keselamatan
Always prioritize safety when operating welding and cutting equipment. This machine is CE certified. Read and understand all safety warnings and instructions before use.
- Pakai peralatan pelindung diri (PPE) yang sesuai, termasuk topi keledar kimpalan, sarung tangan, dan pakaian pelindung.
- Pastikan pengudaraan yang betul untuk mengelakkan terhidu asap.
- Connect the machine to a properly grounded 220V power supply.
- Jauhkan kanak-kanak dan kakitangan yang tidak dibenarkan dari kawasan kerja.
- The machine features a durable transformer and advanced IGBT technology for stable performance.
- An automatic shutdown feature is integrated to prevent damage in case of overload.
- The sheet metal construction is shock-resistant for enhanced durability.
3. Kandungan Pakej
Sahkan bahawa semua item yang disenaraikan di bawah disertakan dalam pakej anda:
- MCT-520DPL Multiprocess Welder with US plug
- Tanah clamp
- MIG torch 15AK
- CUT torch PT-31
- TIG torch WP-9F
- Paip gas (3m)
- Pengatur tekanan udara
- Hos klamp (x2)
- Tungsten electrode (x10)
- Tip (x10)
- Elektrod (x10)
- Collet (x10)
- Muncung (x20)
- Kawat keluli tahan karat
- Nozzle shield (x2)
- Carbon steel wire (1kg)
- Welding wire (3m)
- Sarung tangan kimpalan
- MMA holder
- Welding rod (x5)
4. Persediaan
Follow these steps to set up your ANDELI MCT-520DPL welder:
- Sambungan Kuasa: Connect the welder to a stable 220V power source using the provided US plug. Ensure the power outlet is properly grounded.
- Tanah Clamp: Pasang tanah tanahamp securely to the workpiece or a clean, conductive work surface. A good ground connection is crucial for safe and effective welding.
- Sambungan Obor: Connect the appropriate torch (MIG, TIG, or CUT) to its designated port on the front panel. Ensure connections are tight.
- Gas Connection (for MIG, TIG, COLD): If using a shielding gas, connect the gas pipe from your gas cylinder (e.g., CO2, Argon, or Argon/CO2 mix) to the air pressure regulator, then to the gas inlet on the welder. Adjust the gas flow rate as required for your welding process.
- Air Compressor Connection (for CUT): For plasma cutting, connect an external air compressor to the air inlet on the welder and set the air pressure to approximately 80 PSI.
- Welding Wire/Electrode Installation:
- For MIG: Install the appropriate welding wire spool (e.g., carbon steel wire, stainless steel wire, flux-cored wire) into the wire feeder compartment. Thread the wire through the liner to the MIG torch.
- For TIG: Insert a tungsten electrode into the TIG torch collet.
- For MMA: Insert a welding rod into the MMA holder.
5. Arahan Operasi
The MCT-520DPL features an intuitive control panel. Familiarize yourself with the controls before operation.
5.1. MIG Welding (Gas/Gasless Flux)
MIG welding is suitable for ordinary thin steel, iron, stainless steel, low-carbon steel, and mold repair. It is not suitable for welding aluminum. The machine supports CO2, mixed gas, or flux-cored wire without gas.
- Pilih mod MIG pada panel kawalan.
- Choose the appropriate wire diameter: 0.6mm (0.024"), 0.8mm (0.030"), 0.9mm (0.035"), or 1.0mm (0.040").
- Adjust welding current and voltage according to material thickness and wire type.
- For gas MIG, ensure proper gas flow. For flux-cored wire, no external gas is needed.
5.2. TIG Welding (HF & Pulse)
TIG welding provides precise control and high-quality welds, especially for thinner materials.
- Select TIG mode (HF or Pulse TIG) on the control panel.
- Ensure pure argon gas is connected and flowing.
- Adjust current, pulse frequency, and other parameters based on material and desired weld.
5.3. CUT (Plasma Cutting)
The plasma cutting function allows for efficient cutting of various metals with a cutting thickness range of 6-10mm.
- Select CUT mode.
- Ensure an air compressor is connected and providing approximately 80 PSI of air pressure.
- Adjust cutting current based on material thickness.
5.4. COLD Welding
COLD welding is ideal for thin stainless steel, thin steel, and carbon steel, minimizing heat deformation and discoloration for high aesthetic results. This mode requires pure argon gas.
- Select COLD mode.
- Ensure pure argon gas is connected and flowing.
- Adjust parameters for precise, low-heat welding.
5.5. MMA Welding (Stick)
MMA (Manual Metal Arc) welding, also known as stick welding, is a robust process suitable for various applications using welding rods up to 3.2mm.
- Pilih mod MMA.
- Insert the appropriate welding rod into the MMA holder.
- Adjust welding current based on rod type and material thickness.
6. Penyelenggaraan
Penyelenggaraan tetap memastikan umur panjang dan prestasi optimum pengimpal anda.
- Pembersihan: Periodically clean the exterior of the machine with a dry cloth. Ensure ventilation openings are free from dust and debris. Use compressed air to gently clear internal dust if necessary, ensuring the machine is unplugged.
- Torch Inspection: Inspect welding torches regularly for wear and tear on nozzles, contact tips, and electrodes. Replace worn parts to maintain weld quality.
- Pemeriksaan Kabel: Examine all cables (power, ground, torch) for cuts, fraying, or damage. Replace damaged cables immediately.
- Talian Gas/Udara: Check gas and air lines for leaks or blockages. Ensure connections are secure.
- Storan: Simpan mesin kimpal di persekitaran yang bersih dan kering apabila tidak digunakan.
7. Penyelesaian masalah
If you encounter issues with your welder, refer to the following common problems and solutions:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Tiada kuasa | Power cable disconnected, circuit breaker tripped, faulty power switch | Check power cable, reset circuit breaker, contact support if switch is faulty |
| Poor arc start/stability | Improper ground connection, incorrect settings, worn consumables (tip, electrode) | Ensure good ground, adjust current/voltage, replace consumables |
| Isu penyuapan wayar (MIG) | Tangled wire, incorrect tension, clogged liner, worn drive roller | Untangle wire, adjust tension, clean/replace liner, check drive roller |
| No gas flow (MIG/TIG/COLD) | Empty gas cylinder, closed valve, kinked hose, faulty regulator | Check cylinder level, open valves, straighten hose, inspect regulator |
| Penutupan berlebihan | Exceeded duty cycle, insufficient ventilation | Allow machine to cool down, ensure adequate ventilation, reduce current/duty cycle |
If the problem persists after attempting these solutions, please contact customer service for further assistance.
8. Spesifikasi
Detailed technical specifications for the ANDELI MCT-520DPL welder:
| Ciri | Spesifikasi |
|---|---|
| Pengeluar | ANDELI |
| Nombor Bahagian | MCT-520DPL |
| Berat Barang | 58.4 pounds (Approx. 16 KG) |
| Dimensi Pakej | 23.8 x 22.9 x 12.5 inci |
| Nombor Model Item | MCT-520DPL |
| Voltage | 220 Volts (230V ± 10%) |
| Kekerapan | 50 / 60 Hz |
| Faktor Kuasa | 0.73-0.76 |
| Kecekapan | 80-85% |
| Rated Input Power (KW) | MIG: ~8.2, MMA: ~9.5, CUT: ~8.5 |
| Julat Arus Kimpalan (A) | MIG: 50-200, TIG: 10-200, MMA: 10-200, CUT: 20-50 |
| Vol. Tanpa Bebantage (V) | 64 |
| Duty Cycle (40°C 10min) | 30% (200A/24V), 60% (141A/21.1V), 100% (110A/19.5V) for MIG/TIG/MMA |
| Kelas Perlindungan | IP21S |
| Kelas Penebat | H |
| Menyejukkan | KIPAS & UDARA |
| Dimensi (MM) | 489×210×327 |
9. Waranti dan Sokongan
ANDELI is committed to providing reliable products and excellent customer service.
- Waranti: This product comes with a two-year warranty and free replacement parts for manufacturing defects.
- Pulangan dan Pertukaran: Returns and exchanges are available within 30 days of receiving the goods.
- Perkhidmatan Pelanggan: An efficient customer service team is available to provide free guidance if you encounter any problems with your product. Please contact us through the official channels for support.
