Manual Pengguna Powrun P-ONE Jump Starter

1. Pengenalan

The Powrun P-ONE Jump Starter is a versatile and powerful portable device designed to jump-start vehicles with dead batteries. It also functions as a portable power bank and an emergency LED light, making it an essential tool for road trips, outdoor activities, and unexpected emergencies.

With a peak current of 2000 Amps, it can start up to 8.0L gasoline and 6.5L diesel engines. Its intelligent safety system provides multiple protections, ensuring safe and reliable operation.

Image: The Powrun P-ONE Jump Starter, a compact and powerful device with attached jumper cables.

2. Apa yang ada di dalam Kotak

Upon opening your Powrun P-ONE Jump Starter package, you should find the following items:

• Powrun P-ONE Portable Battery Jump Starter Pack
• Heavy-Duty Jumper Cables with Smart Protection System
• Kabel Pengecas USB-A ke USB-C
• Kes Penyimpanan EVA
• Manual Pengguna

Image: All components included in the Powrun P-ONE Jump Starter package, neatly laid out.

3. Ciri dan Komponen Produk

Familiarize yourself with the key features and components of your Powrun P-ONE Jump Starter:

• Arus Puncak 2000A: Capable of starting large gasoline and diesel engines.
• Intelligent Safety System: Built-in protections against overcharge, over-discharge, over-current, short circuit, over-heat, reverse polarity, reverse connection, and reverse charge.
• 44.4Wh Power Bank: Two USB outputs (5V/3A and 5V/2.1A) for charging mobile devices.
• LED Emergency Lamp: Features Flash Light, Strobe Light, SOS Light, and Red Light modes.
• Skrin LCD Digital: Displays battery status and remaining power.
• Reka bentuk tahan lasak: IP65 waterproof, dust-proof, and shatter-proof rubber-covered molded case.
• Kompas Bersepadu: For navigation during outdoor use.

Image: A detailed diagram highlighting the various components and features of the Powrun P-ONE Jump Starter, including the power button, LED light, car jump start output, USB outputs, LCD screen, and compass.

Image: Visual representation of the intelligent safety protection systems integrated into the Powrun P-ONE Jump Starter, such as over charge, over discharge, over current, and short circuit protection.

Image: The Powrun P-ONE Jump Starter functioning as a portable power bank, charging a smartphone and a tablet simultaneously.

4. Persediaan dan Pengecasan

Before first use, ensure your Powrun P-ONE Jump Starter is fully charged.

4.1 Pengecasan Awal

1. Connect the provided USB-C charging cable to the Type-C input port on the jump starter.
2. Connect the other end of the USB-C cable to a compatible USB wall charger (not included).
3. The digital LCD screen will display the charging progress. Charge until the screen indicates 100%.

It is recommended to fully charge the device every 3-6 months to maintain battery health, even when not in use.

Image: The Powrun P-ONE Jump Starter connected to a wall charger via its USB-C input port for charging.

5. Arahan Operasi

5.1 Lompat Memulakan Kenderaan

Ikuti langkah-langkah ini dengan teliti untuk menghidupkan kenderaan anda:

1. Ensure the jump starter has sufficient charge (at least 50% recommended).
2. Connect the smart jumper cable plug into the 12V smart jumper socket on the Powrun P-ONE.
3. Lekatkan cl (+) merahamp ke terminal positif (+) bateri kenderaan.
4. Lekatkan hitam (-) clamp ke terminal negatif (-) bateri kenderaan.
5. Observe the indicator on the smart jumper cable:
   • If the green light stays on, proceed to start the engine.
   • If the green light flashes, and the battery voltage is below 9V, press and hold the "BOOST" button on the smart cable until the green light stays on. This forces a start for severely discharged batteries.
   • If a red light appears with a buzzing sound, it indicates incorrect connection (e.g., reverse polarity). Disconnect and re-connect correctly.
6. Once the green light is solid, start the vehicle's engine.
7. After the engine starts, immediately remove the jumper clamps from the vehicle battery, then disconnect the smart cable from the jump starter.

Image: A visual guide illustrating the four steps to jump-start a car using the Powrun P-ONE Jump Starter, from connecting the cables to starting the engine.

Imej: Jarak dekat view demonstrating how to press the "BOOST" button on the smart cable for force starting a dead vehicle when the battery voltage terlalu rendah.

5.2 Menggunakan sebagai Power Bank

Untuk mengecas peranti mudah alih anda:

1. Connect your device's USB charging cable to one of the USB output ports on the Powrun P-ONE.
2. Pemula lompat akan mula mengecas peranti anda secara automatik.

5.3 Menggunakan Lampu LED

The built-in LED light has multiple modes:

• Lampu kilat: Press and hold the power button for 3 seconds to turn on the LED light.
• Lampu Strob: Press the power button again to cycle to Strobe mode.
• Lampu SOS: Tekan butang kuasa buat kali ketiga untuk mod SOS.
• Red Emergency Light: Double-press the power button quickly to activate the red emergency light.

Image: Illustration of the four LED light modes available on the Powrun P-ONE: Stable Light, Strobe Light, SOS Rescue Light, and Red Emergency Light.

6. Maklumat Keselamatan

Always adhere to the following safety guidelines when using the Powrun P-ONE Jump Starter:

• Jangan cuba lompat-mulakan bateri beku.
• Ensure proper polarity connection (red to positive, black to negative) to avoid damage to the device or vehicle.
• Jangan hubungkan cl positif dan negatifampbersama-sama.
• Jauhkan peranti daripada kanak-kanak.
• Jangan dedahkan peranti kepada suhu yang melampau atau cahaya matahari langsung untuk tempoh yang lama.
• Simpan di tempat yang sejuk dan kering.
• Jika peranti menjadi terlalu panas semasa digunakan, putuskan sambungannya dengan segera dan biarkan ia sejuk.
• Jangan buka unit ini. Rujuk semua servis kepada kakitangan yang berkelayakan.

7. Penyelenggaraan dan Penyimpanan

Proper maintenance ensures the longevity and optimal performance of your jump starter:

• Bersihkan peranti dengan kain kering dan lembut. Jangan gunakan pembersih atau pelarut yang melelas.
• Store the jump starter in its EVA storage case when not in use to protect it from dust and impact.
• Recharge the unit every 3-6 months to prevent deep discharge and extend battery life.
• Store in a temperature-controlled environment, ideally between 32°F (0°C) and 113°F (45°C).

Image: The Powrun P-ONE Jump Starter being splashed with water, illustrating its IP65 waterproof and dust-proof capabilities for use in challenging weather conditions.

8. Penyelesaian masalah

9. Spesifikasi

10. Waranti dan Sokongan

The Powrun P-ONE Jump Starter comes with a two-year after-sales service. For any questions, concerns, or support needs, please contact Powrun customer service via email. They aim to respond within 12 hours.

For further assistance, you may refer to the official Powrun store or the user manual PDF provided with your product.

• Manual Pengguna Rasmi (PDF): Muat turun PDF
• Powrun Store: Lawati Kedai