1. Pengenalan
Thank you for choosing the MOUNTUP Ultrawide Single Monitor Arm, Model MU7007. This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your new monitor arm. Please read this manual thoroughly before installation and keep it for future reference.
2. Maklumat Keselamatan
Sila patuhi langkah berjaga-jaga keselamatan berikut semasa pemasangan dan penggunaan:
- Jangan melebihi kapasiti berat maksimum 33 lbs (15 kg).
- Ensure your monitor's VESA pattern is compatible (75x75mm or 100x100mm).
- Verify that your desk surface is strong enough to support the combined weight of the monitor arm and your monitor.
- Always use the provided hardware and follow installation steps carefully.
- Jauhkan kanak-kanak dan haiwan peliharaan semasa pemasangan.
- Adjust the gas spring tension only when the arm is in a horizontal position to prevent sudden movement.
3. Kandungan Pakej
Sila pastikan semua komponen ada dan tidak rosak:
- Perhimpunan Lengan Monitor
- Plat VESA boleh tanggal
- C-Clamp Pangkalan
- Grommet Base (Optional)
- Mounting Hardware Kit (screws, washers, spacers)
- Perpisahan Allen
- Manual Arahan
Image: All components of the MOUNTUP Ultrawide Single Monitor Arm, showing the main arm, the C-clamp mounting option, and the grommet mounting option.
4. Spesifikasi
| Ciri | Spesifikasi |
|---|---|
| Nombor Model | MU7007 |
| Keserasian Saiz Skrin | 22 - 40 inci |
| Kapasiti Berat | 6.6 - 33 paun (3 - 15 kg) |
| Keserasian VESA | 75x75mm, 100x100mm |
| Pilihan Pemasangan | C-Clamp, Grommet |
| Julat Kecondongan | +90° / -45° |
| Julat Putar | 180° (at arm joints), 360° (at VESA plate) |
| Putaran | 360° (Portrait to Landscape) |
| Sambungan Maks | 22.5 inci (57.15 cm) |
| Pelarasan Ketinggian Maks | 19.75 inci (50.16 cm) |
| bahan | Keluli Aloi |
| warna | Hitam |
| Port USB | 2 (integrated into base, USB cable not included) |
Image: The monitor arm supporting an ultrawide screen, highlighting its compatibility with screens up to 40 inches and a weight capacity of 30.9 lbs.
5. Persediaan dan Pemasangan
The MOUNTUP monitor arm offers two installation methods: C-Clamp dan Gunung Grommet.
5.1. Choose Your Mounting Method
Determine which mounting method is suitable for your desk. The C-clamp is drill-free, while the grommet mount requires a hole in your desk.
5.2. C-Clamp Pemasangan
- Pasangkan C-clamp to the bottom of the main pole.
- Place the monitor arm assembly onto your desk edge.
- Ketatkan C-clamp skru sehingga lengan diikat dengan kukuh pada meja.
5.3. Grommet Mount Installation (Optional)
- If your desk has a grommet hole, or you plan to drill one, attach the grommet base plate to the bottom of the main pole.
- Insert the pole through the grommet hole.
- Secure the base from underneath the desk using the provided hardware.
5.4. Memasang Monitor
- Attach the detachable VESA plate to the back of your monitor using the appropriate VESA screws and spacers from the hardware kit. Ensure the screws are tightened securely.
- Slide the monitor (with the attached VESA plate) onto the arm's VESA head until it clicks into place.
- Tighten the security screw on the VESA head to prevent accidental detachment.
Image: A woman demonstrating the easy installation process, attaching a monitor to the arm using the detachable VESA plate, indicating setup can be completed within 15 minutes.
6. Pengendalian dan Pelarasan
The MOUNTUP monitor arm offers extensive adjustability for optimal ergonomic positioning.
6.1. Pelarasan Tegangan Pegas Gas
The gas spring tension needs to be adjusted to match your monitor's weight. If the monitor rises too easily or drops, adjust the tension:
- Monitor raises up: Turn the adjustment screw (located on the arm joint) clockwise (towards the "-" direction) to reduce tension for lighter monitors.
- Monitor drops down: Turn the adjustment screw counter-clockwise (towards the "+" direction) to increase tension for heavier monitors.
- Penting: Hold the arm in a horizontal position during adjustment to prevent sudden movement.
6.2. Pelarasan Ketinggian
Once the gas spring tension is correctly set, you can freely move the monitor up and down to your desired height. The arm allows for a height adjustment range of 13 inches, with a minimum height of 6.7 inches and a maximum height of 19.7 inches from the desk surface.
6.3. Pelarasan Sudut Kecondongan
To adjust the monitor's tilt angle:
- Loosen the tilting bolt (turn towards the "-" direction) on the VESA head.
- Adjust the monitor to your desired tilt angle (+90° to -45°).
- Retighten the tilting bolt (turn towards the "+" direction) to secure the angle.
6.4. Pusing dan Putaran
- Pusing: The arm joints allow for 180° swivel, and the VESA plate can swivel 360°, providing flexibility to share your screen or adjust viewsudut-sudut.
- Putaran: The VESA plate supports 360° rotation, allowing you to switch your monitor between landscape and portrait orientations.
Image: Detailed instructions for adjusting the gas spring tension and the monitor's tilt angle using an Allen wrench.
Image: Visual representation of the monitor arm's full range of motion, including tilt (+90°/-45°), 360° swivel at arm joints, and 360° rotation for portrait/landscape viewing.
Image: A diagram illustrating the free height adjustment capabilities, showing minimum height (6.7"), maximum height (19.7"), and maximum extension (22.6").
6.5. Pengurusan Kabel
The monitor arm features integrated cable management to keep your workspace tidy. Route your cables through the removable covers on the arm and the base. The base also includes two USB connectors for convenient access (USB cable not included).
Image: A visual guide demonstrating the routing of cables through the detachable USB connector integrated into the monitor arm's base, promoting a clutter-free desk.
7. Penyelenggaraan
Regular maintenance ensures the longevity and optimal performance of your monitor arm:
- Pembersihan: Wipe the arm and base with a soft, damp kain. Elakkan pembersih yang kasar.
- Semak Sambungan: Periodically check all screws and bolts to ensure they are tight and secure. Retighten if necessary.
- Spring Gas: The gas spring is designed for long-term use (over 20,000 cycles) and generally requires no specific maintenance beyond initial tension adjustment.
8. Penyelesaian masalah
Jika anda menghadapi masalah dengan lengan monitor MOUNTUP anda, rujuk masalah dan penyelesaian biasa berikut:
8.1. Monitor Melorot atau Tidak Memegang Kedudukan
- Punca: Gas spring tension is too low for the monitor's weight.
- Penyelesaian: Increase the gas spring tension by turning the adjustment screw counter-clockwise (towards the "+" direction) as described in Section 6.1.
8.2. Monitor Floats Up or is Difficult to Push Down
- Punca: Gas spring tension is too high for the monitor's weight.
- Penyelesaian: Decrease the gas spring tension by turning the adjustment screw clockwise (towards the "-" direction) as described in Section 6.1.
8.3. Monitor Tilts Forward or Backward Unexpectedly
- Punca: The tilt angle bolt on the VESA head is loose.
- Penyelesaian: Retighten the tilt angle bolt as described in Section 6.3.
8.4. Arm Feels Loose or Unstable
- Punca: Meja clamp atau pelekap grommet tidak diketatkan dengan secukupnya.
- Penyelesaian: Recheck and tighten the C-clamp or grommet mounting hardware securely.
9. Waranti dan Sokongan
MOUNTUP stands behind the quality and durability of its products. This monitor arm comes with a 3-year support period, ensuring its strength and reliability.
For further assistance, technical support, or warranty claims, please contact MOUNTUP customer service through the retailer where you purchased the product or visit the official MOUNTUP webtapak untuk maklumat hubungan.