PeakTech 2035 True RMS Digital Multimeter User Manual

pengenalan

The PeakTech 2035 is a professional True RMS digital multimeter designed for accurate and reliable electrical measurements. This device features a 3 5/6-digit inverted LCD with backlight, a USB interface for data transfer, and the capability to measure up to 1000 V and 10 A (max 20 A) AC/DC. It includes True RMS and LowZ measurement functions, ensuring precise readings in various applications. This manual provides essential information for the safe and effective operation of your PeakTech 2035 multimeter.

Maklumat Keselamatan

Always adhere to safety precautions when using the multimeter to prevent electric shock or damage to the device.

• The PeakTech 2035 meets safety standard EN 61010-1 and is rated for CAT III 1000 V / CAT IV 600 V.
• Jangan cuba mengukur voltages atau arus melebihi had maksimum yang ditetapkan.
• Ensure the test leads are in good condition and properly connected before making any measurements.
• Never use the multimeter if it appears damaged or if the battery cover is not securely closed.
• Avoid using the device in wet environments or during electrical storms.
• Always disconnect power to the circuit before connecting or disconnecting test leads for resistance, capacitance, or diode measurements.
• Gantikan bateri dengan segera apabila penunjuk bateri rendah muncul untuk memastikan bacaan yang tepat dan fungsi peranti yang betul.

Kandungan Pakej

Sahkan bahawa semua item yang disenaraikan di bawah terdapat dalam pakej anda. Jika ada barang yang hilang atau rosak, hubungi pengedar anda dengan segera.

Image: The PeakTech 2035 multimeter and its accessories, including test leads, USB cable, temperature probe, 9V battery, software CD, and a black carrying case.

• Multimeter Digital PeakTech 2035
• Petunjuk Ujian (Merah dan Hitam)
• Kabel Sambungan USB
• Siasatan Suhu
• Bateri 9V
• Software CD (for data logging)
• Membawa Sarung
• User Manual (German and English)

Produk Selesaiview dan Ciri

The PeakTech 2035 is equipped with a range of features for comprehensive electrical testing.

Imej: A terperinci view of the PeakTech 2035 multimeter highlighting its measurement capabilities including AC/DC voltage, AC/DC current, resistance, LowZ, frequency, temperature, and USB.

• Pengukuran RMS Sebenar: Menyediakan bacaan yang tepat untuk bentuk gelombang bukan sinusoidal.
• LowZ Function: Impedans rendah voltage measurement to eliminate ghost voltages.
• paparan: 3 5/6-digit (6000 counts) inverted LCD with bright backlight for clear visibility in all conditions.
• Antaramuka USB: Allows data transfer to a computer for logging and analysis using the included software.
• Julat Pengukuran: Capable of measuring up to 1000 V AC/DC and 10 A AC/DC (20 A for short durations).
• Penilaian Keselamatan: CAT III 1000 V / CAT IV 600 V according to EN 61010-1.
• Fungsi Tambahan: Includes MAX/MIN, HOLD, REL (Relative measurement), Hz/Duty Cycle, Diode Test, and Continuity Test.

Image: Diagram illustrating the various components of the PeakTech 2035 multimeter, including the 3 5/6-digit LCD, Hz/Duty button, MAX/MIN button, SELECT switch, HOLD/BL button, RANGE button, USB/REL function, rotary switch, 10A input jack, mA input jack, V/Hz/Ω/CAP/TEMP input jack, and COM input jack.

Persediaan

1. Pemasangan Bateri

The PeakTech 2035 is powered by a 9V battery.

1. Pastikan multimeter dimatikan.
2. Cari petak bateri di bahagian belakang peranti.
3. Tanggalkan skru penahan dan tanggalkan penutup bateri.
4. Sambungkan bateri 9V ke klip bateri, memerhatikan kekutuban yang betul.
5. Letakkan bateri di dalam petak dan gantikan penutup, selamatkannya dengan skru.

2. Menghubungkan Petunjuk Ujian

Sambungan petunjuk ujian yang betul adalah penting untuk pengukuran yang tepat dan selamat.

• Sentiasa sambungkan wayar ujian hitam ke bicu input "COM" (Common).
• Untuk voltage, resistance, frequency, capacitance, diode, and temperature measurements, connect the red test lead to the "V/Hz/Ω/CAP/TEMP" input jack.
• For current measurements up to 600mA, connect the red test lead to the "mA" input jack.
• For high current measurements (up to 10A, or 20A for short durations), connect the red test lead to the "10A" input jack.

Arahan Operasi

This section details how to perform various measurements using your PeakTech 2035 multimeter.

1. Hidupkan/Mati Kuasa

Turn the rotary switch from "OFF" to any desired measurement function to power on the device. To power off, turn the rotary switch back to "OFF". The device also features an Auto Power Off (APO) function to conserve battery life.

2. Jldtage Pengukuran (AC/DC)

1. Connect the black test lead to "COM" and the red test lead to "V/Hz/Ω/CAP/TEMP".
2. Putar suis putar kepada "V~" (AC Voltage) atau "V-" (Vol DCtage) kedudukan.
3. Touch the test probes to the circuit points where you want to measure voltage.
4. Vol yang diukurtage will be displayed on the LCD. Use the "SELECT" button to switch between AC and DC if the range includes both.

3. Pengukuran Semasa (AC/DC)

Awas: Never connect the multimeter in parallel to a voltage source when measuring current. Always connect it in series with the load.

1. Connect the black test lead to "COM".
2. For currents up to 600mA, connect the red test lead to "mA". For currents up to 10A (20A peak), connect the red test lead to "10A".
3. Turn the rotary switch to the "mA~" / "mA-" or "A~" / "A-" position, depending on the expected current range and type (AC/DC).
4. Open the circuit where you want to measure current and connect the multimeter in series.
5. The measured current will be displayed. Use the "SELECT" button to switch between AC and DC.

4. Pengukuran Rintangan (Ω)

1. Connect the black test lead to "COM" and the red test lead to "V/Hz/Ω/CAP/TEMP".
2. Putar suis putar ke kedudukan "Ω".
3. Pastikan litar yang diuji dinyahtenagakan.
4. Touch the test probes across the component or circuit section.
5. Nilai rintangan akan dipaparkan.

5. LowZ Measurement

The LowZ function provides a low impedance voltage measurement, which helps to drain ghost voltages that can appear on unused wires or open circuits.

1. Connect the black test lead to "COM" and the red test lead to "V/Hz/Ω/CAP/TEMP".
2. Turn the rotary switch to the "LoZ V~" or "LoZ V-" position.
3. Apply the test probes to the circuit. The multimeter will display the voltage with reduced ghost voltage kesan.

6. Frequency (Hz) and Duty Cycle Measurement

1. Connect the black test lead to "COM" and the red test lead to "V/Hz/Ω/CAP/TEMP".
2. Putar suis putar ke kedudukan "Hz".
3. Apply the test probes to the signal source.
4. Press the "Hz/Duty" button to toggle between frequency and duty cycle display.

7. Temperature Measurement (°C/°F)

1. Connect the temperature probe to the "V/Hz/Ω/CAP/TEMP" and "COM" input jacks, observing polarity.
2. Putar suis putar ke kedudukan "°C/°F".
3. Place the tip of the temperature probe on the object or area whose temperature you wish to measure.
4. The temperature will be displayed. Use the "SELECT" button to switch between Celsius and Fahrenheit.

8. USB Interface and Data Logging

The PeakTech 2035 features a USB interface for connecting to a computer and using the included "PeakTech DMM Tool" software for data logging and analysis.

1. Install the "PeakTech DMM Tool" software from the provided CD onto your computer.
2. Connect the multimeter to your computer using the supplied USB cable.
3. Turn the rotary switch to a measurement function that supports data logging (e.g., V, A, Ω).
4. Launch the software on your computer and follow the on-screen instructions to establish a connection and begin data logging.

Image: A laptop screen showing the "PeakTech DMM Tool" software interface, displaying a graph and table of logged measurement data, indicating the multimeter's data transfer capability.

Penyelenggaraan

1. Penggantian Bateri

When the low battery indicator appears on the display, replace the 9V battery immediately to ensure accurate readings. Follow the battery installation steps outlined in the "Setup" section.

2. Pembersihan

Untuk membersihkan multimeter, lap bekas dengan iklanamp kain dan detergen yang lembut. Jangan gunakan bahan kasar atau pelarut. Pastikan peranti kering sepenuhnya sebelum digunakan.

3. Penggantian fius

If the current measurement function fails, the fuse may need replacement. Refer to the full user manual for detailed instructions on fuse replacement, as this typically requires opening the device and should only be performed by qualified personnel.

Menyelesaikan masalah

• Tiada paparan atau paparan samar: Check battery charge. Replace the 9V battery if necessary.
• Bacaan yang salah:
  • Ensure test leads are correctly connected to the appropriate input jacks.
  • Verify the rotary switch is set to the correct measurement function and range.
  • Periksa petunjuk ujian yang rosak.
  • For current measurements, ensure the fuse is intact.
• "OL" atau "OVER" dipaparkan: The measured value exceeds the selected range. Switch to a higher range or verify the circuit is within the device's capabilities.
• Isu sambungan USB:
  • Ensure the USB cable is securely connected to both the multimeter and the computer.
  • Verify that the "PeakTech DMM Tool" software is correctly installed and running.
  • Check device manager for proper driver installation.

Spesifikasi

Waranti dan Sokongan

Maklumat Waranti

The PeakTech 2035 Digital Multimeter comes with a Waranti pengilang selama 3 tahun. Waranti ini melindungi kecacatan pada bahan dan mutu kerja di bawah penggunaan biasa. Sila simpan bukti pembelian anda untuk tuntutan waranti.

Image: A badge indicating "3 Years Manufacturer Warranty".

Sokongan Pelanggan

For technical assistance, troubleshooting, or warranty inquiries, please contact PeakTech customer support. Refer to the official PeakTech weblaman web atau maklumat hubungan yang diberikan dalam pembungkusan produk anda untuk butiran sokongan terkini.

Note: Guaranteed software updates until: unknown.

Video Produk

Tiada video produk rasmi daripada penjual tersedia untuk dibenamkan pada masa ini. Sila rujuk arahan bertulis dan gambar rajah untuk panduan.