ThermoPro TP260B Indoor Outdoor Thermometer User Manual

Produk Selesaiview

The ThermoPro TP260B is a professional-grade indoor/outdoor thermometer and hygrometer designed for accurate and reliable monitoring of temperature and humidity. Featuring a market-leading 1000ft/300m wireless range, it allows you to monitor conditions in multiple locations around your home or property. The main unit displays both indoor and outdoor readings, including trend arrows and 24-hour high/low records. Its easy-to-read backlit display and touch buttons ensure user-friendly operation. The remote sensor is weatherproof and cold-resistant, making it suitable for various outdoor environments.

Figure 1: ThermoPro TP260B Main Unit and Remote Sensor

Kandungan Pakej

• 1 x Main Thermometer Unit
• 1 x Penderia Suhu Jauh
• 4 x AAA Size Batteries (included)
• 1 x Manual Pengguna

Key Components and Display

Rajah 2: Terperinci view of the main unit's display and touch buttons.

The main unit features a large, clear LCD display with distinct sections for indoor and outdoor readings. Key indicators include:

• KELUAR: Suhu dan kelembapan luar.
• DALAM: Suhu dan kelembapan dalaman.
• CH1/2/3: Indicates the channel of the remote sensor being displayed.
• MAX / MIN: Displays the highest and lowest recorded temperature/humidity over the last 24 hours.
• Anak Panah Trend: Shows whether temperature/humidity is rising, falling, or remaining stable.
• Penunjuk Bateri Rendah: Makluman apabila bateri memerlukan penggantian.
• Butang ° F / ° C: Togol antara Fahrenheit dan Celsius.
• CH/SYNC Button: Used for channel selection and sensor synchronization.
• Light Touch Button: Activates the display backlight for improved visibility in low light.
• Butang MAX/MIN/CLEAR: Toggles between Max/Min readings and clears recorded data.

Persediaan

1. Pemasangan Bateri

1. Unit Utama: Open the battery compartment on the back of the main unit. Insert 2 x AAA batteries, ensuring correct polarity (+/-). Close the compartment.
2. Sensor Jauh: Open the battery compartment on the back of the remote sensor. Insert 2 x AAA batteries, ensuring correct polarity (+/-). Close the compartment.

2. Penyegerakan

The main unit and remote sensor should automatically synchronize once batteries are installed. If synchronization fails or you are adding additional sensors, follow these steps:

• Letakkan unit utama dan sensor alat kawalan jauh berdekatan antara satu sama lain.
• Tekan dan tahan butang CH/SYNC button on the main unit for 3 seconds. The display will flash, indicating it is searching for the sensor.
• Tekan ke TETAP SEMULA button on the back of the remote sensor.
• Unit utama sepatutnya memaparkan bacaan sensor jauh dalam masa beberapa minit.

Nota: The ThermoPro TP260B supports up to 3 remote sensors (sold separately). To add more sensors, repeat the synchronization process for each additional sensor, selecting a different channel (CH1, CH2, or CH3) on the main unit using the CH/SYNC butang.

Figure 3: The main unit can connect with up to three remote sensors.

3. Pilihan Penempatan

The main unit offers versatile placement options:

• Stand Atas Meja: Use the integrated fold-out stand for desktop or shelf placement.
• Pemasangan Dinding: Utilize the hanging hole on the back to mount it on a wall.
• Magnet terbina dalam: Attach the unit to any metallic surface, such as a refrigerator.

For the remote sensor, choose a location that provides accurate readings and is within the 1000ft wireless range. Avoid direct sunlight or areas with extreme temperature fluctuations. The sensor is weatherproof, but placing it under an overhang or in a sheltered spot can prolong its lifespan.

Figure 4: Various placement options for the main unit.

Arahan Operasi

1. Switching Temperature Units (°F/°C)

Tekan ke °F/°C button on the front of the main unit to toggle between Fahrenheit and Celsius temperature displays.

2. Activating Backlight

Sentuh pada Cahaya button (light bulb icon) on the front of the main unit to activate the backlight for 15 seconds, improving readability in dark conditions.

Figure 5: The LCD screen features a backlight for easy reading.

3. Viewing and Clearing MAX/MIN Records

Tekan ke MAX/MIN/CLEAR butang sekali ke view suhu dan kelembapan maksimum yang direkodkan sejak tetapan semula terakhir. Tekan sekali lagi untuk view the minimum records. To clear the 24-hour high/low records, press and hold the MAX/MIN/CLEAR butang selama 3 saat.

4. Monitoring Multiple Channels

If you have multiple remote sensors, press the CH/SYNC button repeatedly to cycle through the channels (CH1, CH2, CH3) and view the readings from each sensor. The main unit will automatically scroll through all active channels every few seconds.

Penyelenggaraan

1. Penggantian Bateri

When the low battery indicator appears on the display, replace the batteries in the respective unit (main unit or remote sensor) with new AAA batteries. Ensure correct polarity.

Nota Penting: If you only replace the remote sensor battery, please press and hold the CH/SYNC button of the receiver for 3 seconds to re-register, or by reinstalling the battery of the receiver within 3 minutes and then they will automatically resynchronize the data.

2. Pembersihan dan Penyimpanan

Bersihkan unit dan sensor dengan kain lembut,amp cloth. Do not immerse in water or use abrasive cleaners. Store the device in a dry place away from extreme temperatures when not in use for extended periods.

Figure 6: The remote sensor is designed to withstand various weather conditions.

Menyelesaikan masalah

• No readings on display or "---" shown:
  • Periksa sama ada bateri dipasang dengan betul dengan polariti yang betul.
  • Gantikan bateri lama dengan yang baru.
  • Ensure the main unit and sensor are within the 1000ft wireless range and free from major obstructions.
  • Perform a manual synchronization as described in the "Setup" section.
• Bacaan tidak tepat:
  • Ensure the sensor is not placed in direct sunlight, near heat sources, or in areas with poor air circulation.
  • Allow the units to stabilize for at least 30 minutes after setup for accurate readings.
  • The 1000-ft range may be affected by obstructions in your home layout (including walls, router, trees, and bushes as well as building materials such as metal and glass). Try relocating the sensor or main unit.
• Paparan malap atau berkelip:
  • Replace the batteries in the main unit.

Spesifikasi

Waranti dan Sokongan

ThermoPro products come with a warranty. For detailed warranty information, product registration, or technical support, please visit the official ThermoPro webtapak atau rujuk maklumat hubungan yang diberikan dalam pembungkusan produk anda.

You can also download the full user manual in PDF format here: ThermoPro TP260B User Manual (PDF)