BRUNO Cube Timer Clock BCA026-WH Instruction Manual

1. Pengenalan

Terima kasih kerana membeliasing the BRUNO Cube Timer Clock BCA026-WH. This compact and versatile device functions as both a digital clock and a timer, featuring an alarm, snooze, and backlight. Its intuitive design makes it suitable for various settings, from kitchen counters to office desks. Please read this manual carefully to ensure proper use and to maximize the product's lifespan.

Image 1.1: The BRUNO Cube Timer Clock BCA026-WH in white, displaying the time and its control buttons.

2. Persediaan

2.1. Pemasangan Bateri

The BRUNO Cube Timer Clock requires two AAA batteries (included). Follow these steps to install them:

1. Cari penutup petak bateri di bahagian belakang unit.
2. Luncurkan penutup ke bawah untuk membukanya.
3. Masukkan dua bateri AAA, pastikan kekutuban (+ dan -) yang betul seperti yang ditunjukkan di dalam petak.
4. Gantikan penutup petak bateri dengan menggelongsorkannya ke atas sehingga ia berbunyi klik pada tempatnya.

Image 2.1: The battery compartment located on the back of the clock, showing where to insert two AAA batteries.

2.2. Tetapan Masa dan Tarikh Permulaan

After installing batteries, the display will show a default time. To set the current time and date:

1. Tekan dan tahan butang Jam/Tarikh button (usually marked with a clock icon or 'M') to enter setting mode. The hour digits will flash.
2. Gunakan + dan - butang untuk melaraskan jam.
3. Tekan ke Jam/Tarikh button again to move to minute setting, then adjust with + dan -.
4. Terus tekan Jam/Tarikh button to cycle through year, month, and day settings, adjusting each with + dan -.
5. Setelah semua tetapan selesai, tekan butang Jam/Tarikh button one last time or wait a few seconds for the device to exit setting mode automatically.
6. To switch between 12-hour and 24-hour display, press the + button while the time is displayed in clock mode.

3. Arahan Operasi

3.1. Switching Between Clock and Timer Modes

The device operates in two main modes: Clock Mode and Timer Mode. To switch between them, press the Mod button (often marked with an hourglass icon).

3.2. Setting and Using the Timer

The Cube Timer Clock features a unique rotary switch for quick timer activation and up to three preset timer patterns.

1. Activating a Preset Timer: The top part of the clock can be rotated. Each side of the top cube may have a number (e.g., 1, 2, 3) corresponding to a preset timer duration. Simply rotate the top cube so the desired preset number faces upwards to start the timer.
2. Setting Custom Timer: In Timer Mode, use the + dan - butang untuk menetapkan masa undur yang diingini.
3. Starting/Stopping Timer: Tekan ke Mula/Berhenti button (often integrated with the Mode button or a separate button) to begin or pause the countdown.
4. Penggera Pemasa: When the timer reaches zero, an electronic alarm will sound. Press any button to stop the alarm.

Image 3.1: Setting the timer by rotating the top cube to select a preset duration.

3.3. Setting the Alarm and Snooze

Untuk menetapkan penggera:

1. Dalam Mod Jam, tekan dan tahan Penggera button (marked with a bell icon) to enter alarm setting mode. The alarm hour digits will flash.
2. Gunakan + dan - butang untuk melaraskan jam penggera.
3. Tekan ke Penggera button again to move to minute setting, then adjust with + dan -.
4. Tekan ke Penggera button one last time or wait for the device to exit setting mode.
5. Untuk mengaktifkan/menyahaktifkan penggera, tekan butang Penggera button briefly. An alarm icon will appear/disappear on the display.

Apabila penggera berbunyi, tekan Tunda button (often the top surface of the clock or a dedicated button) to temporarily silence it. The alarm will sound again after a few minutes (typically 5-10 minutes). To turn off the alarm completely, press any other button.

Image 3.2: Setting the alarm time on the clock.

3.4. Fungsi Lampu Belakang

The display features a backlight for visibility in low-light conditions. To activate the backlight, press the Cahaya button (if available) or briefly press the top surface of the clock. The backlight will illuminate for a few seconds and then turn off automatically.

4. Penyelenggaraan

4.1. Pembersihan

To clean your BRUNO Cube Timer Clock:

• Lap bahagian luar dengan kain lembut dan kering.
• Untuk tanda degil, sedikit dampen kain dengan air dan detergen lembut, kemudian lap kering serta-merta.
• Jangan gunakan pembersih yang melelas, pelarut, atau rendam peranti di dalam air.

4.2. Penggantian Bateri

When the display becomes dim or the functions stop working correctly, it's time to replace the batteries. Follow the battery installation steps in Section 2.1. Always replace both batteries at the same time with new ones of the same type (AAA).

5. Penyelesaian masalah

6. Spesifikasi

• model: BCA026-WH
• Dimensi: W58 x H78 x D58 mm
• Berat: Kira-kira 100g
• Sumber Kuasa: Bateri AAA x 2
• Fungsi: Timer, 12/24 hour display, Date display, Electronic alarm, Snooze, Backlight
• Bahan: ABS resin (main body)
• Negara Asal: China

7. Maklumat & Sokongan Waranti

7.1. Waranti

This BRUNO product is covered by a limited warranty against defects in materials and workmanship from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by misuse, accident, unauthorized modification, or normal wear and tear. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official BRUNO webtapak.

7.2. Sokongan Pelanggan

If you encounter any issues or have questions regarding your BRUNO Cube Timer Clock that are not addressed in this manual, please contact BRUNO customer support. Contact information can typically be found on the product packaging, the official BRUNO webtapak, atau melalui peruncit anda.