Marvel Legends Series 3.75-inch Retro 375 Collection Firestar Action Figure User Manual

pengenalan

This manual provides essential information for the safe and proper use of your Marvel Legends Series 3.75-inch Retro 375 Collection Firestar action figure. Please read these instructions carefully before use and retain them for future reference.

Maklumat Keselamatan Penting

AMARAN: Bahagian kecil mungkin dihasilkan. Bukan untuk kanak-kanak di bawah 3 tahun.

This product is intended for ages 4 and up. Adult supervision is recommended for younger children.

Apa yang ada dalam Kotak

• 1 x Marvel Legends Series 3.75-inch Retro 375 Collection Firestar Action Figure

No assembly is required. The figure is ready to play directly out of the box.

Persediaan

1. Membuka kotak: Carefully remove the Firestar action figure from its retro-inspired packaging. Retain packaging for collector's value if desired.
2. Pemeriksaan: Before play, inspect the figure for any manufacturing defects or damage.

Image: Marvel Legends Firestar action figure shown in its retro-inspired blister packaging, highlighting the classic design.

Mengendalikan dan Berposing

The Firestar action figure features multiple points of articulation, allowing for various dynamic poses. Gently manipulate the joints to achieve desired stances.

• Ketua: Can be rotated and tilted.
• Bahu: Rotate and move outwards.
• Siku: Bend to allow arm articulation.
• Pergelangan tangan: Putar.
• Pinggul: Rotate and move outwards.
• Lutut: Bend to allow leg articulation.

Avoid excessive force when posing to prevent damage to the joints or figure.

Image: The Firestar action figure standing in a neutral pose, showcasing its articulation and design.

Penyelenggaraan dan Penjagaan

• Pembersihan: Untuk membersihkan figura tersebut, lap perlahan-lahan dengan kain lembut dan kering. Untuk kotoran degil, lap sedikitamp kain boleh digunakan, diikuti dengan pengeringan segera. Elakkan bahan kimia yang keras atau pembersih yang kasar.
• Storan: Simpan figura tersebut jauh daripada cahaya matahari langsung, suhu ekstrem dan kelembapan tinggi untuk mengelakkan perubahan warna atau degradasi bahan.
• Pengendalian: Handle the figure by its main body parts rather than small accessories or delicate joints to minimize stress.

Menyelesaikan masalah

Joints are stiff:

Gently warm the joint area with warm water or a hairdryer on a low setting for a few seconds to loosen the plastic, then carefully attempt to move the joint. Do not overheat.

Figure does not stand:

Adjust the leg and foot articulation to find a stable center of gravity. Ensure the figure is placed on a flat, even surface.

Spesifikasi

Waranti dan Sokongan

For information regarding warranty coverage or product support, please refer to the manufacturer's official webtapak atau hubungi bahagian perkhidmatan pelanggan mereka. Simpan bukti pembelian anda untuk sebarang tuntutan waranti.

Pengeluar: Hasbro