EQUATION 3276000607168

EQUATION SLIM Bathroom Fan with Humidity Sensor and Timer (100mm Diameter) - Instruction Manual

Model: 3276000607168

1. Pengenalan

Thank you for choosing the EQUATION SLIM Bathroom Fan. This manual provides essential information for the safe installation, operation, and maintenance of your new ventilation unit. Please read these instructions carefully before installation and retain them for future reference.

This fan is designed for intermittent air renewal in bathrooms, toilets, or kitchens up to 7 m². It effectively combats humidity and odors, contributing to a healthier indoor environment.

2. Maklumat Keselamatan

AMARAN: Electrical appliances can be hazardous. Installation and maintenance must be performed by a qualified electrician in accordance with local wiring regulations and standards.

  • Ensure the power supply is disconnected before installation, maintenance, or repair.
  • Do not install the fan in areas where it may be exposed to direct water spray.
  • Perkakas ini tidak dimaksudkan untuk digunakan oleh orang (termasuk kanak-kanak) yang kurang keupayaan fizikal, deria, atau mental, atau kurang pengalaman dan pengetahuan, melainkan mereka telah diberi pengawasan atau arahan mengenai penggunaan perkakas oleh orang yang bertanggungjawab untuk keselamatan mereka .
  • Kanak-kanak harus diawasi untuk memastikan bahawa mereka tidak bermain dengan perkakas.
  • Jangan halangan masuk atau keluar udara.
  • The fan must not be connected to a chimney flue or any other combustion product exhaust duct.

3. Produk Lebihview

3.1. Ciri-ciri Utama

  • Operasi automatik: Equipped with an adjustable humidity sensor and timer for automated ventilation.
  • Pengudaraan yang Cekap: Suitable for rooms up to 7 m² with an airflow of 72 m³/h.
  • Tahap Bunyi Rendah: Operates quietly at 32 dB(A) for minimal disturbance.
  • Cekap Tenaga: Low power consumption of 8 W.
  • Draf belakang Damper: Includes a non-return flap to prevent outside air from entering the room.
  • Motor Tahan Lama: Features a ball bearing motor for extended lifespan.
  • Pemasangan Mudah: Designed for wall mounting and includes a fixing kit.

3.2. Komponen

The EQUATION SLIM Bathroom Fan consists of the main fan unit, an integrated humidity sensor, a timer, and a backdraft damper. A fixing kit is supplied for installation.

EQUATION SLIM Bathroom Fan front view

Rajah 1: Depan view of the EQUATION SLIM Bathroom Fan. This image shows the square white casing with horizontal grilles covering the fan blades.

EQUATION SLIM Bathroom Fan with specifications overlay

Figure 2: The fan unit with key specifications highlighted, including 32 dB(A) noise level, 8W power, 100mm diameter, and symbols for humidity sensor and timer. Below are icons indicating adjustable humidity (60-90%) and timer (2-30 minutes) settings.

4. Pemasangan

The fan is designed for wall or ceiling mounting. For electrical connections, it is strongly recommended to consult a qualified electrician to ensure compliance with all safety standards and regulations.

4.1. Pemeriksaan Pra-Pemasangan

  • Verify that the power supply matches the fan's specifications (220-240V, 50Hz).
  • Ensure the installation location allows for proper airflow and maintenance access.
  • Confirm that the wall or ceiling material can support the fan's weight and allow for secure mounting.
  • Prepare a circular opening of 100 mm diameter for the duct connection.

4.2. Langkah Pemasangan

  1. Putuskan Kuasa: Matikan bekalan kuasa utama pada pemutus litar sebelum memulakan sebarang kerja elektrik.
  2. Tandakan Titik Penggerudian: Use the fan's mounting plate as a template to mark the drilling points on the wall or ceiling.
  3. Lubang gerudi: Gerudi lubang pada titik yang ditanda dan masukkan palam dinding yang disediakan.
  4. Sambungan Elektrik: Connect the electrical wires to the terminal block inside the fan unit. Ensure correct polarity (Live, Neutral, Earth if applicable). Refer to the wiring diagram provided with the product packaging.
  5. Pasang Kipas: Secure the fan unit to the wall or ceiling using the screws from the fixing kit.
  6. Install Backdraft Damper: Pastikan draf belakang damper is correctly positioned to prevent reverse airflow.
  7. Pulihkan Kuasa: Once installation is complete and all connections are secure, restore power to the circuit.
Diagram showing fan dimensions and included fixing kit

Figure 3: Dimensional drawing of the fan (149x149mm front, 97mm depth, 99mm duct length) and an illustration of the included fixing kit (screws and wall plugs).

EQUATION SLIM Bathroom Fan installed on a wall in a kitchen setting

Figure 4: The fan installed on a white wall, demonstrating a typical installation in a kitchen or utility area.

EQUATION SLIM Bathroom Fan installed on a ceiling in a kitchen setting

Figure 5: The fan installed on a white ceiling, demonstrating a typical overhead installation in a kitchen or utility area.

5. Arahan Operasi

The EQUATION SLIM Bathroom Fan operates automatically based on its integrated humidity sensor and timer.

5.1. Humidity Sensor Adjustment

The humidity sensor can be adjusted to activate the fan when the ambient humidity level exceeds a set threshold. The adjustable range is typically between 60% and 90% relative humidity.

  • To adjust, carefully remove the front cover of the fan.
  • Locate the humidity adjustment dial (often marked with a '%' symbol).
  • Turn the dial clockwise to increase the humidity threshold (fan activates at higher humidity) or counter-clockwise to decrease it (fan activates at lower humidity).
  • Gantikan penutup hadapan dengan selamat.

5.2. Timer Adjustment

The timer function allows the fan to continue operating for a set period after the humidity level drops below the threshold or after the light switch (if wired to it) is turned off. The adjustable range is typically between 2 and 30 minutes.

  • To adjust, carefully remove the front cover of the fan.
  • Locate the timer adjustment dial (often marked with a 'min' or clock symbol).
  • Turn the dial clockwise to increase the run-on time or counter-clockwise to decrease it.
  • Gantikan penutup hadapan dengan selamat.

Nota: Always ensure power is disconnected before adjusting internal settings.

6. Penyelenggaraan

Pembersihan berkala memastikan prestasi optimum dan memanjangkan jangka hayat kipas anda.

  1. Putuskan Kuasa: Always turn off the power supply to the fan at the circuit breaker before cleaning.
  2. Keluarkan Penutup Depan: Carefully unclip or unscrew the front grille/cover.
  3. Bersihkan Gril dan Bilah: Gunakan yang lembut, damp cloth and mild detergent to clean the front grille and the fan blades. Avoid using abrasive cleaners or solvents.
  4. Perumahan Bersih: Lap perumah luar dengan iklanamp kain.
  5. Pasang semula: Ensure all parts are dry before reattaching the front cover.
  6. Pulihkan Kuasa: Once reassembled, restore power to the fan.

Kekerapan: Cleaning should be performed every 3-6 months, or more frequently in dusty or high-humidity environments.

7. Penyelesaian masalah

Jika anda mengalami masalah dengan kipas anda, rujuk masalah dan penyelesaian biasa berikut:

MasalahKemungkinan PuncaPenyelesaian
Kipas tidak dihidupkan.Tiada bekalan kuasa.
Pendawaian yang tidak betul.
Humidity sensor setting too high.
Periksa pemutus litar dan sambungan kuasa.
Verify wiring with a qualified electrician.
Adjust humidity sensor to a lower threshold.
Kipas terus berjalan.Humidity sensor setting too low.
Timer set for a long duration.
Faulty sensor/timer.
Adjust humidity sensor to a higher threshold.
Adjust timer to a shorter duration.
Contact customer support if issues persist after adjustment.
Reduced airflow or unusual noise.Blocked grille or fan blades.
Komponen longgar.
Isu motor.
Disconnect power and clean the grille and blades.
Check for loose screws or parts (with power off).
Hubungi sokongan pelanggan jika bunyi bising berterusan.
Backdraft of cold air.Draf belakang damper obstructed or damaged.Disconnect power and inspect the backdraft damper for obstructions or damage. Clear any blockages or replace if damaged.

If the problem persists after attempting these solutions, please contact EQUATION customer support.

8. Spesifikasi

JenamaPERSAMAAN
Nombor Model3276000607168
Dimensi Produk (L x W x H)9.7 x 14.9 x 14.9 cm
Berat badan10 g
kuasa8 Watt
Tahap Kebisingan32 Decibels (A)
Aliran udara72 m³/j
Saiz Bilik yang DisyorkanSehingga 7 m²
Diameter Saluran100 mm
Ciri KhasHumidity Sensor, Timer, Backdraft Damper, Ball Bearing Motor
Jenis PemasanganLekap di dinding

9. Waranti dan Sokongan

Specific warranty details are typically provided with the product packaging or can be found on the manufacturer's official webtapak. Sila simpan bukti pembelian anda untuk sebarang tuntutan waranti.

For technical support, spare parts, or further assistance, please contact EQUATION customer service through their official channels. Information regarding spare parts availability is not provided in this document.

© 2023 EQUATION. All rights reserved. Information in this manual is subject to change without notice.